FSG Reg Quiz 1

10 Questions | Total Attempts: 618

SettingsSettingsSettings
Please wait...
FSG Reg Quiz 1

To prepare ourselves for the registration on 13th January. Lets kick some sweet FSG ass!


Questions and Answers
  • 1. 
    What diameter will the tennis ball have that is used to check, if a vehicle complies to the "Open Wheel" definition?
    • A. 

      68.6mm (2.7 inches)

    • B. 

      66.8mm (2.6 inches)

    • C. 

      86.6mm (3.4 inches)

    • D. 

      68.8mm (2.7 inches)

  • 2. 
    Which frame component does not necessarily belong to the primary structure?
    • A. 

      Suspension Mounting Points

    • B. 

      Front Bulkhead

    • C. 

      Side Impact Structure

    • D. 

      Front Hoop

  • 3. 
    Which of these measures is not used to dimension the cockpit opening template?
    • A. 

      50mm

    • B. 

      100mm

    • C. 

      75mm

    • D. 

      350mm

  • 4. 
    What is the minimum width of a head restraint with a height of 200mm?
    • A. 

      150mm

    • B. 

      117.5mm

    • C. 

      50mm

    • D. 

      280mm

  • 5. 
    In order to test, if the vehicle provides sufficient overall stability for cornering with 1.7G, it is tilted to 60° on the tilt table. To which angle must the vehicle be tilted to simulate cornering with 2.5G?
    • A. 

      68.2°

    • B. 

      65.0°

    • C. 

      67.8°

    • D. 

      69.1°

  • 6. 
    The space needed for the technical inspection sticker at FSG is approximately
    • A. 

      254mm wide x 203mm high

    • B. 

      203mm wide x 254mm high

    • C. 

      75mm high x 150mm wide

    • D. 

      150mm high x 75mm wide

  • 7. 
    How far must throttle cables at least be apart from any exhaust system component?
    • A. 

      50.8mm (2 inches)

    • B. 

      25.4mm (1 inch)

    • C. 

      76.2mm (3 inches)

    • D. 

      101.6mm (4 inches)

  • 8. 
    What is the sum of the maximum scores of all static events?
    • A. 

      325 pts

    • B. 

      300 pts

    • C. 

      350 pts

    • D. 

      275 pts

  • 9. 
    The quick jack must be able to lift up the car, so that the driven wheels are at least
    • A. 

      10.2 cm (4 in) off the ground

    • B. 

      12.7 cm (5 in) off the ground

    • C. 

      15.2 cm (6 in) off the ground

    • D. 

      17.8 cm (7 in) off the ground

  • 10. 
    The front track of a vehicle is 1350mm wide. What is the difference of the maximum and minimum allowed width of the rear track?
    • A. 

      756.833mm

    • B. 

      757.25mm

    • C. 

      756.53mm

    • D. 

      756.821mm

    • E. 

      779mm

Related Topics
Back to Top Back to top