The Ultimate Networking Exam Quiz! Trivia

Questions

Settings

Share on Facebook Share on Twitter Share on Whatsapp Share on Pinterest Share on Email Copy to Clipboard Embed on your website

The Ultimate Networking Exam Quiz! Trivia - Quiz

The ultimate networking exam quiz trivia. Computer Networks are designed to ensure that computers within it can share data with ease. Having a properly designed network has the ability to reduce the resources needed to carry out everyday work. Do you know how to properly set up a network? The quiz below is a perfect way to refresh your understanding based on practical examples. Try it out!

Questions and Answers

1.

Refer to the exhibit. Host B attempts to establish a TCP/IP session with host C. During this attempt, a frame was captured at the FastEthernet interface fa0/1 of the San Francisco router. The packet inside the captured frame has the source IP address 10.10.1.2, and the destination IP address is 10.31.1.20. What is the destination MAC address of the frame at the time of capture?
- A.
  
  0060.7320.D632
- B.
  
  0060.7320.D631
- C.
  
  0040.8517.44C3
- D.
  
  0009.B2E4.EE03
- E.
  
  0010.C2B4.3421
Correct Answer
A. 0060.7320.D632
2.

Refer to the exhibit. Host A wants to access the Internet. Which combination of a Layer 2 address and a Layer 3 address will enable this access from host A?
- A.
  
  Destination MAC: 0030.8596.DE83 Default gateway: 209.165.202.130
- B.
  
  Destination MAC: 0030.8596.DE82 Default gateway: 172.16.9.2
- C.
  
  Destination MAC: 0030.8517.44C4 Default gateway: 172.16.1.1
- D.
  
  Destination MAC: 0030.8517.44C4 Default gateway: 209.165.202.130
Correct Answer
C. Destination MAC: 0030.8517.44C4 Default gateway: 172.16.1.1
3.

What are the three characteristics of CSMA/CD? • It monitors the media for the presence of a data signal. • After detecting a collision, hosts can resume transmission after a random timer has expired. • A jam signal is used to ensure that all hosts are aware that a collision has occurred. • Devices can be configured with a higher transmission priority. • Data is transmitted only when the data signal is present. • It uses a token system to avoid collisions.
- A.
  
  • It monitors the media for presence of a data signal.
- B.
  
  • After detecting a collision, hosts can resume transmission after a random timer has expired.
- C.
  
  • A jam signal is used to ensure that all hosts are aware that a collision has occurred.
- D.
  
  • Data is transmitted only when the data signal is present.
- E.
  
  • It uses a token system to avoid collisions.
Correct Answer(s)
A. • It monitors the media for presence of a data signal.
B. • After detecting a collision, hosts can resume transmission after a random timer has expired.
C. • A jam signal is used to ensure that all hosts are aware that a collision has occurred.
4.

Refer to the exhibit. Host A wants to access the Internet. Which combination of a Layer 2 address and a Layer 3 address will enable this access from host A?
- A.
  
  Destination MAC: 0030.8596.DE83 Default gateway: 209.165.202.130
- B.
  
  Destination MAC: 0030.8596.DE82 Default gateway: 172.16.9.2
- C.
  
  Destination MAC: 0030.8517.44C4 Default gateway: 172.16.1.1
- D.
  
  Destination MAC: 0030.8517.44C4 Default gateway: 209.165.202.130
Correct Answer
C. Destination MAC: 0030.8517.44C4 Default gateway: 172.16.1.1
5.

Refer to the exhibit. Communication between hosts X and Y is restricted to the local network. What is the reason for this?
- A.
  
  • The gateway addresses are broadcast addresses.
- B.
  
  • Host Y is assigned a multicast address
- C.
  
  • Host X and host Y belong to different networks.
- D.
  
  • Host X is assigned a network address.
Correct Answer
C. • Host X and host Y belong to different networks.
6.

Refer to the exhibit. Which logical topology describes the exhibited network?
- A.
  
  Star
- B.
  
  Ring
- C.
  
  Point-to-point
- D.
  
  Multi-access
Correct Answer
C. Point-to-point
7.

Refer to the exhibit. PC1 is unable to access PC2. To troubleshoot this problem, the technician needs to confirm that the next-hop interface is operational. Which default gateway address should the technician ping from PC1 to confirm this?
- A.
  
  10.0.0.254
- B.
  
  192.168.0.249
- C.
  
  192.168.0.250
- D.
  
  10.0.1.254
Correct Answer
C. 192.168.0.250
8.

Refer to the exhibit. Cable 1 and Cable 2 are wired for specific physical layer requirements. Which three segments use Cable 2?
- A.
  
  6
- B.
  
  2
- C.
  
  3
- D.
  
  4
- E.
  
  5
Correct Answer(s)
A. 6
B. 2
E. 5
9.

Refer to the exhibit. Which two facts can be determined about the topology? • Three networks are needed. • Two logical address ranges are required. • A single broadcast domain is present. • Three collision domains are present. • Four networks are needed.
- A.
  
  Three networks are needed.
- B.
  
  Two logical address ranges are required
- C.
  
  A single broadcast domain is present.
- D.
  
  Three collision domains are present.
- E.
  
  Four networks are needed.
Correct Answer(s)
B. Two logical address ranges are required
C. A single broadcast domain is present.
10.

• The assigned address is a private address.• The PC cannot communicate with the DNS server.• The network can have 126 hosts.• The prefix of the computer address is /26.• The IP address is routable on the Internet.
- A.
  
  The assigned address is a private address
- B.
  
  The PC cannot communicate with the DNS server.
- C.
  
  The network can have 126 hosts.
- D.
  
  The prefix of the computer address is /26.
- E.
  
  The IP address is routable on the Internet.
Correct Answer(s)
A. The assigned address is a private address
D. The prefix of the computer address is /26.

Quiz Review Timeline +

Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.

Current Version
Mar 21, 2022

Quiz Edited by
ProProfs Editorial Team
Dec 15, 2008

Quiz Created by
Jtrotta914

The Ultimate Networking Exam Quiz! Trivia

Refer to the exhibit. Host A wants to access the Internet. Which combination of a Layer 2 address and a Layer 3 address will enable this access from host A?

Refer to the exhibit. Host A wants to access the Internet. Which combination of a Layer 2 address and a Layer 3 address will enable this access from host A?

Refer to the exhibit. Communication between hosts X and Y is restricted to the local network. What is the reason for this?

Refer to the exhibit. Which logical topology describes the exhibited network?

Refer to the exhibit. PC1 is unable to access PC2. To troubleshoot this problem, the technician needs to confirm that the next-hop interface is operational. Which default gateway address should the technician ping from PC1 to confirm this?

Refer to the exhibit. Cable 1 and Cable 2 are wired for specific physical layer requirements. Which three segments use Cable 2?

Refer to the exhibit. Which two facts can be determined about the topology? • Three networks are needed. • Two logical address ranges are required. • A single broadcast domain is present. • Three collision domains are present. • Four networks are needed.

• The assigned address is a private address.• The PC cannot communicate with the DNS server.• The network can have 126 hosts.• The prefix of the computer address is /26.• The IP address is routable on the Internet.