Quiz: Could You Pass The Networking Test Questions?
This is my quiz to aid in studying for my business networking exam tmr at 0830
- 1.
Identify 3 ways of improving MAN/WAN performance.
- A.
Improving speed of devices
- B.
Using better routing protocol and reducint network demand
- C.
Including a network usage analysis for a new app software, using data compression
- D.
Shifting usage to off-peak times, establishing priorities for some apps
- E.
Redesigning network to move data closer to users
Correct Answer(s)
A. Improving speed of devices
B. Using better routing protocol and reducint network demand
C. Including a network usage analysis for a new app software, using data compression
D. Shifting usage to off-peak times, establishing priorities for some apps
E. Redesigning network to move data closer to users -
- 2.
What are the benefits to improve MAN/WAN ?
- A.
Shows what circuits need to be increaed/ decreases in capacity, what new circuits need to be leased, and when additional switched circuits may be needed to meet protocol demands
Correct Answer
A. Shows what circuits need to be increaed/ decreases in capacity, what new circuits need to be leased, and when additional switched circuits may be needed to meet protocol demandsExplanation
Shows what circuits need to be increaed/ decreases in capacity,
what new circuits need to be leased, and
when additional switched circuits may be needed to meet protocol demandsRate this question:
-
- 3.
What do the best practice BN designs dependo on?
- A.
Cost, effective data rates, and need to convert protcols
Correct Answer
A. Cost, effective data rates, and need to convert protcols -
- 4.
What is the best BN architecture for most orginizations?
- A.
Collapsed BN
Correct Answer
A. Collapsed BN -
- 5.
What is the recommended technology for BN architecture?
- A.
Gigabit ethernet
Correct Answer
A. Gigabit ethernet -
- 6.
Name 3 ways of improving BN performance.
- A.
1. convert all devices to use the same data-link layered network layer routing protocols, 2. upgrading to faster circuits and adding additional circuits on very busy BNs, 3. Move servers closer to the end users OR reduce broadcast traffic
Correct Answer
A. 1. convert all devices to use the same data-link layered network layer routing protocols, 2. upgrading to faster circuits and adding additional circuits on very busy BNs, 3. Move servers closer to the end users OR reduce broadcast traffic -
- 7.
What is ATM
- A.
A packet switched technology originally designed for use in WANS
Correct Answer
A. A packet switched technology originally designed for use in WANS -
- 8.
What are the characteristics of ATM
- A.
Uses 53-byte fixed-length packets no error control of full-duplex 155 mbps or 622 Mbps point-to point circuits enables Oos Uses vertual circuits rather than permanently assigning addresses to devices
Correct Answer
A. Uses 53-byte fixed-length packets no error control of full-duplex 155 mbps or 622 Mbps point-to point circuits enables Oos Uses vertual circuits rather than permanently assigning addresses to devices -
- 9.
Name some of the standards developed to ensure capability b/n different user agents & mail transfer agents. and the 3 used on the Int. vs other commonly used
- A.
SMTP, POP, IMAP= INT X.400 & CMC = other commonly used standards
Correct Answer
A. SMTP, POP, IMAP= INT X.400 & CMC = other commonly used standards -
- 10.
What layer allows the user to create and send email msgs? What are the client computers called in this process?
- A.
Application layer software package; user sgents
Correct Answer
A. Application layer software package; user sgents -
- 11.
Name the 3 fundamental application architectures. Define their purposes/ duties.
- A.
1. hose based networks: server performs virtually all the work. 2. CLient-Based Networks: Client computer does most of the work. 3. Client-Server Networks: Work is share b/n servers and clients.
Correct Answer
A. 1. hose based networks: server performs virtually all the work. 2. CLient-Based Networks: Client computer does most of the work. 3. Client-Server Networks: Work is share b/n servers and clients. -
- 12.
Who performs all presentation logic? Who handles all data storare and data access logic? Who performs application logic?
- A.
Client, Server, Client and/or server
Correct Answer
A. Client, Server, Client and/or server -
- 13.
What are the primary sources of errors in networks?
- A.
Impulse noises (lightning), cross talk, echo, attenuation
Correct Answer
A. Impulse noises (lightning), cross talk, echo, attenuation -
Quiz Review Timeline +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Mar 21, 2022Quiz Edited by
ProProfs Editorial Team -
Dec 12, 2007Quiz Created by
John2804
- Binary Code Quizzes
- Computer Concept Quizzes
- Computer Essential Quizzes
- Computer Forensics Quizzes
- Computer Hardware Quizzes
- Computer Networking Quizzes
- Computer Parts Quizzes
- Computer Programming Quizzes
- Computer Science Quizzes
- Computer Security Quizzes
- Computer Shortcut Key Quizzes
- Computer Skills Quizzes
- Computer Virus Quizzes
- Cyber Security Quizzes
- Data Quizzes
- Data Security Quizzes
- Hacking Quizzes
- HCI Quizzes
- IT SecurITy Quizzes
- Malware Quizzes
- Microprocessor Quizzes
- Network Quizzes
- Operating System Quizzes
- Phishing Quizzes
- Programming Language Quizzes
- Server Quizzes
- Software Quizzes
Back to top