Supply 7 Level Vol 2
(60).webp "Supply 7 Level Vol 2 - Quiz")
Questions and Answers
- 1.
Which mission capable (MICAP) cause code indicates the request was a first demand for the item?
- A.
A
- B.
B
- C.
C
- D.
D
Correct Answer
A. AExplanation
The correct answer is A. The reason behind this is that in the given question, it is mentioned that the mission capable (MICAP) cause code indicates the request was a first demand for the item. Therefore, option A is the correct answer as it signifies the first demand for the item.Rate this question:
-
- 2.
Which mission capable (MICAP) cause code indicates past recurring demand or reparable generation experience but Air Force stockage policy precluded establishment of a demand-based stock level?
- A.
A
- B.
B
- C.
C
- D.
D
Correct Answer
B. BExplanation
MICAP cause code B indicates that there has been past recurring demand or reparable generation experience, but the Air Force stockage policy prevented the establishment of a demand-based stock level. This means that there has been a history of needing to repair or replace certain items, but the stock levels were not adjusted to meet the demand.Rate this question:
-
- 3.
Which mission capable (MICAP) cause code indicates that Air Force stockage policy permits a demand-based stock level, but an external decision by HQ AFMC has determined that stocking the item at base should be restricted?
- A.
A
- B.
B
- C.
C
- D.
D
Correct Answer
C. CExplanation
The correct answer is C. This cause code indicates that Air Force stockage policy permits a demand-based stock level, but an external decision by HQ AFMC has determined that stocking the item at base should be restricted.Rate this question:
-
- 4.
What mission capable (MICAP) cause code indicates base decision not to stock the item?
- A.
A
- B.
B
- C.
C
- D.
D
Correct Answer
D. DExplanation
MICAP cause code D indicates that the base has made a decision not to stock the item. This means that the item is not deemed necessary or essential for the base's operations and therefore will not be kept in stock.Rate this question:
-
- 5.
Which mission capable (MICAP) cause code indicates the number of recoverable items in need of repair is equal to or greater than the authorized stock level?
- A.
F
- B.
G
- C.
H
- D.
J
Correct Answer
B. GExplanation
MICAP cause code G indicates that the number of recoverable items in need of repair is equal to or greater than the authorized stock level. This means that there are enough items that need repair to meet or exceed the authorized stock level, indicating a potential shortage of available items.Rate this question:
-
- 6.
Which mission capable (MICAP) cause code indicates stock replenishment requisition exceeds priority group Uniform Materiel Movement and Issue Priority System (UMMIPS) standards?
- A.
F
- B.
G
- C.
H
- D.
J
Correct Answer
C. HExplanation
The correct answer is H. This cause code indicates that the stock replenishment requisition exceeds the priority group UMMIPS standards. This means that the requisition is of high priority and needs to be fulfilled quickly in order to maintain the mission capability.Rate this question:
-
- 7.
Which mission capable (MICAP) cause code indicates less-than-full base stock, stock replenishment does not exceed Uniform Materiel Movement and Issue Priority System (UMMIPS) time standards by priority groups, and awaiting part (AWP) assets are on order at time of MICAP?
- A.
X
- B.
T
- C.
S
- D.
R
Correct Answer
B. TExplanation
The correct answer is T. This cause code indicates that there is less than full base stock available, and the stock replenishment is not meeting the time standards set by UMMIPS for priority groups. Additionally, there are assets on order for awaiting parts at the time of the MICAP.Rate this question:
-
- 8.
Which mission capable (MICAP) delete code indicates item received from Air Logistics Centers (ALC)?
- A.
1
- B.
2
- C.
3
- D.
4
Correct Answer
A. 1Explanation
MICAP delete code 1 indicates that the item was received from Air Logistics Centers (ALC).Rate this question:
-
- 9.
Which mission capable (MICAP) delete code indicates item satisfied through lateral support?
- A.
1
- B.
2
- C.
3
- D.
4
Correct Answer
C. 3Explanation
MICAP delete codes are used to indicate the status of an item that was previously designated as mission capable but is no longer in that condition. In this case, the correct answer is 3, which indicates that the item has been satisfied through lateral support. This means that the item has been fixed or replaced with the help of support from another unit or organization.Rate this question:
-
- 10.
Which mission capable (MICAP) delete code indicates request reported in error?
- A.
0
- B.
7
- C.
8
- D.
9
Correct Answer
D. 9Explanation
The mission capable (MICAP) delete code 9 indicates that the request was reported in error. This means that the request for mission capability was made mistakenly or inaccurately.Rate this question:
-
- 11.
Which transaction identification code (TRIC) notification is used to notify the Integrated Maintenance Data System (IMDS) of a change in the due-out status of an item?
- A.
DUO
- B.
DFM
- C.
ISU
- D.
1SH
Correct Answer
D. 1SHExplanation
The correct answer is 1SH. This transaction identification code (TRIC) notification is used to notify the Integrated Maintenance Data System (IMDS) of a change in the due-out status of an item.Rate this question:
-
- 12.
Which due-out status code on the transaction identification code (TRIC) 1SH describes a cancellation?
- A.
1
- B.
2
- C.
3
- D.
4
Correct Answer
A. 1Explanation
The correct answer is 1. This due-out status code on the transaction identification code (TRIC) 1SH indicates a cancellation.Rate this question:
-
- 13.
Which due-in from maintenance listing is used to monitor awaiting part (AWP) end items?
- A.
Q04
- B.
D19
- C.
D20
- D.
D23
Correct Answer
B. D19 -
- 14.
To perform the due-in from maintenance reconciliation, what listing is used?
- A.
Q04
- B.
D19
- C.
D23
- D.
D20
Correct Answer
C. D23 -
- 15.
Which due-in from maintenance (DIFM) detail record can be updated by the transaction identification code (TRIC) “DFM” input?
- A.
Firm and Credit
- B.
Firm and Memo
- C.
Credit only
- D.
Memo and Credit
Correct Answer
B. Firm and MemoExplanation
The transaction identification code (TRIC) "DFM" input can be used to update the Firm and Memo fields in the due-in from maintenance (DIFM) detail record.Rate this question:
-
- 16.
Failure to process turnaround (TRN) data in a correct and timely manner results in reduced base stock levels and incomplete reports from which buy, repair, and distribution decisions are made by
- A.
Cataloging and Standardization Office (CASO).
- B.
Defense Logistics Agency (DLA).
- C.
Government Services Administration (GSA).
- D.
HQ AFMC
Correct Answer
D. HQ AFMCExplanation
Failure to process turnaround (TRN) data in a correct and timely manner can lead to reduced base stock levels and incomplete reports. These reports are crucial for making decisions related to buying, repairing, and distributing items. The correct answer, HQ AFMC, refers to the organization responsible for handling these decisions.Rate this question:
-
- 17.
Which update is prepared and processed by flight service center (FSC) to update demand data on the item record and repair cycle data on the repair cycle record?
- A.
Calibration
- B.
Turnaround
- C.
Cannibalization
- D.
Repair cycle
Correct Answer
B. TurnaroundExplanation
The correct answer is "Turnaround." Turnaround refers to the process of preparing and processing updates by the flight service center (FSC) to update demand data on the item record and repair cycle data on the repair cycle record. This involves updating and maintaining accurate information about the demand for items and the repair cycles they go through. Calibration, cannibalization, and repair cycle are not directly related to updating demand and repair cycle data.Rate this question:
-
- 18.
Unserviceable assets are stored in the logistics readiness squadron (LRS) warehouse until when?
- A.
Receipt of AFTO Form 350.
- B.
Receipt of AF Form 1348–1A.
- C.
Receipt of disposition instructions.
- D.
Unserviceable assets are never stored in the LRS warehouse.
Correct Answer
C. Receipt of disposition instructions.Explanation
Unserviceable assets are stored in the logistics readiness squadron (LRS) warehouse until receipt of disposition instructions. This means that once the LRS receives instructions on how to dispose of the unserviceable assets, they will no longer be stored in the warehouse.Rate this question:
-
- 19.
How is a decision normally made on whether to give a customer a refund for the turn-in of property?
- A.
Automatically by the automated general support operating program (AGSOP).
- B.
Automatically under the Materiel Management System program control.
- C.
Externally by the accountable officer.
- D.
Externally by the flight chief.
Correct Answer
B. Automatically under the Materiel Management System program control.Explanation
The decision on whether to give a customer a refund for the turn-in of property is normally made automatically under the Materiel Management System program control. This suggests that the refund process is automated and follows specific guidelines or criteria set by the program. The system likely evaluates factors such as the condition of the property, any applicable warranties or return policies, and other relevant information to determine if a refund should be issued. This automated approach ensures consistency and efficiency in handling customer refunds.Rate this question:
-
- 20.
When monitoring awaiting part (AWP) end items, personnel at bases submit requests for repair parts on a fill or back-order basis using the urgency justification code (UJC)
- A.
“AB” only.
- B.
“AR” only.
- C.
“AA” or “AB.”
- D.
“AR” or “BR.”
Correct Answer
D. “AR” or “BR.”Explanation
Personnel at bases can submit requests for repair parts on a fill or back-order basis using either the urgency justification code (UJC) "AR" or "BR". This means that they can request the parts to be filled immediately (AR) or back-ordered for later delivery (BR) based on the urgency of the situation. The use of either code allows for flexibility in the ordering process and ensures that the necessary repair parts are obtained in a timely manner.Rate this question:
-
- 21.
When the last awaiting part (AWP) due-out is released or canceled, what due-in from maintenance (DIFM) status code is assigned as a result of AWP processing?
- A.
“02P.”
- B.
“03P.”
- C.
“AWP.”
- D.
“FWP.”
Correct Answer
D. “FWP.”Explanation
When the last awaiting part (AWP) due-out is released or canceled, the due-in from maintenance (DIFM) status code assigned as a result of AWP processing is "FWP."Rate this question:
-
- 22.
Which required delivery date (RDD) is assigned to output requisition transactions for two-level maintenance (2LM) items?
- A.
999
- B.
777
- C.
256
- D.
123
Correct Answer
B. 777Explanation
The RDD assigned to output requisition transactions for two-level maintenance (2LM) items is 777.Rate this question:
-
- 23.
What are additional warehouses called if they are located within the activities they are supporting?
- A.
Supply Points
- B.
Warehouse
- C.
Storage
- D.
Vault
Correct Answer
A. Supply PointsExplanation
Additional warehouses that are located within the activities they are supporting are called supply points. These supply points are strategically placed in close proximity to the areas where they are needed, allowing for efficient and timely distribution of goods and resources. They serve as hubs for storing and distributing supplies, ensuring that they are readily available to support the activities they are serving. By being located within the activities they support, supply points help to streamline logistics and enhance overall operational effectiveness.Rate this question:
-
- 24.
Who maintains accountability and control of assets in a supply point?
- A.
Logistics readiness squadron (LRS)/quality assurance.
- B.
LRS/materiel management activity.
- C.
AFMC SCM-R quality assurance.
- D.
AFMC SCM-R stock control activity.
Correct Answer
B. LRS/materiel management activity.Explanation
The LRS/materiel management activity maintains accountability and control of assets in a supply point. They are responsible for managing and tracking the inventory of supplies and equipment, ensuring that they are properly stored, distributed, and accounted for. This includes conducting regular inventories, updating records, and coordinating with other units to ensure the availability and accuracy of assets.Rate this question:
-
- 25.
Which transaction identification code (TRIC) is used to load, change, or delete supply point details?
- A.
MSI
- B.
ISU
- C.
FSP
- D.
DFM
Correct Answer
C. FSPExplanation
The transaction identification code (TRIC) used to load, change, or delete supply point details is FSP. This code is specifically designed for managing supply point details and allows users to perform actions such as loading new details, making changes to existing details, or deleting supply point information. The other options (MSI, ISU, and DFM) are not related to supply point details and therefore, are not the correct TRICs for this particular task.Rate this question:
-
- 26.
Which activity and organization code is used when loading a supply point detail document number?
- A.
B, 005.
- B.
B, 100.
- C.
S, 005.
- D.
S, 100.
Correct Answer
C. S, 005.Explanation
The correct answer is S, 005. The question is asking for the activity and organization code that is used when loading a supply point detail document number. The activity code "S" indicates that it is a supply-related activity, and the organization code "005" specifies the specific organization or location associated with the supply point detail document number.Rate this question:
-
- 27.
What type of war reserve materiel (WRM) equipment is authorized to support a peacetime function that ceases to exist in wartime, thereby allowing the equipment to satisfy a wartime requirement?
- A.
WRM.
- B.
Mobility.
- C.
Joint Use.
- D.
Major command (MAJCOM) use.
Correct Answer
C. Joint Use.Explanation
Joint Use is the correct answer because it refers to the type of war reserve materiel (WRM) equipment that is authorized to support a peacetime function that ceases to exist in wartime. This means that the equipment can be used by multiple entities or organizations during peacetime, but in wartime, when the function it supports is no longer necessary, it can be utilized to satisfy a different requirement. This flexibility allows for efficient utilization of resources during different operational scenarios.Rate this question:
-
- 28.
What type of war reserve materiel (WRM) equipment is needed to be moved with a unit or is needed for deployment in an emergency or during wartime?
- A.
Major command (MAJCOM) use.
- B.
Mobility.
- C.
Joint Use.
- D.
WRM.
Correct Answer
B. Mobility.Explanation
Mobility is the correct answer because it refers to the type of war reserve materiel (WRM) equipment that is needed to be moved with a unit or is needed for deployment in an emergency or during wartime. This means that the equipment must be easily transportable and able to be quickly deployed to support military operations. Major command (MAJCOM) use, joint use, and WRM are not specifically related to the type of equipment needed for movement or deployment.Rate this question:
-
- 29.
Which major command (MAJCOM) is the lead command for Basic Expeditionary Airfield Resources (BEAR) systems?
- A.
Air Force Special Operations Command (AFSOC)/A4.
- B.
Air Force Materiel Command (AFMC)/A4.
- C.
Air Mobility Command (AMC)/A4.
- D.
Air Combat Command (ACC)/A4.
Correct Answer
D. Air Combat Command (ACC)/A4.Explanation
Air Combat Command (ACC)/A4 is the correct answer because ACC is responsible for organizing, training, and equipping combat-ready forces for air, space, and cyberspace operations. The A4 directorate within ACC is specifically responsible for logistics planning and execution, including the management of resources such as the Basic Expeditionary Airfield Resources (BEAR) systems. Therefore, ACC/A4 would be the lead command for BEAR systems.Rate this question:
-
- 30.
How many sets comprise the Basic Expeditionary Airfield Resources (BEAR) component subsystems?
- A.
9
- B.
8
- C.
7
- D.
6
Correct Answer
D. 6Explanation
The correct answer is 6. This means that the Basic Expeditionary Airfield Resources (BEAR) component subsystems are comprised of 6 sets.Rate this question:
-
- 31.
Which Basic Expeditionary Airfield Resources (BEAR) component subsystem set supports 150 personnel in the open-the-base force module?
- A.
B–150.
- B.
B–550i.
- C.
B–550f.
- D.
B–IO.
Correct Answer
A. B–150.Explanation
The correct answer is B-150. The B-150 Basic Expeditionary Airfield Resources (BEAR) component subsystem set supports 150 personnel in the open-the-base force module. This means that it provides the necessary resources and equipment to support the needs of 150 personnel in a deployed airfield setting. The other options, B-550i, B-550f, and B-IO, do not specify the number of personnel they can support or are not relevant to the question.Rate this question:
-
- 32.
Which Basic Expeditionary Airfield Resources (BEAR) component subsystem is a stand-alone set that provides a robust camp consisting of billeting, feeding, and hygiene to support 550 personnel?
- A.
B–150.
- B.
B–550i.
- C.
B–550f.
- D.
B–FF.
Correct Answer
B. B–550i.Explanation
The B-550i component subsystem is a stand-alone set that provides a robust camp consisting of billeting, feeding, and hygiene to support 550 personnel. This means that it includes all the necessary resources, such as accommodations, food services, and sanitation facilities, to support a camp of 550 personnel. The other options, B-150, B-550f, and B-FF, do not specify the capacity or the specific resources provided, so they are not the correct answer.Rate this question:
-
- 33.
Which Basic Expeditionary Airfield Resources (BEAR) component subsystem is an additive set to the B–550i, which increases support to 1,100 people?
- A.
B–150.
- B.
B–IF.
- C.
B–550f.
- D.
B–IO.
Correct Answer
C. B–550f.Explanation
The correct answer is B-550f. The B-550f is an additive set to the B-550i, which increases support to 1,100 people.Rate this question:
-
- 34.
This is an air transportable package of readiness spares, repair parts, and related maintenance supplies required to support planned wartime or contingency operations of a weapon system or support system for a specified period of time pending resupply.
- A.
In-place readiness spares packages (IRSP).
- B.
Mobility readiness spares packages (MRSP).
- C.
Consumable readiness spares packages (CRSP).
- D.
Flexible consumable readiness spares packages (FCRSP).
Correct Answer
B. Mobility readiness spares packages (MRSP).Explanation
The given description states that the package is air transportable and is designed to support planned wartime or contingency operations for a specific period of time before resupply. Among the options provided, the most suitable choice is Mobility readiness spares packages (MRSP), as it implies the ability to be transported and supports readiness for operations in different locations. The other options, In-place readiness spares packages (IRSP), Consumable readiness spares packages (CRSP), and Flexible consumable readiness spares packages (FCRSP), do not specifically mention air transportability or mobility.Rate this question:
-
- 35.
How often is mobility readiness spares package (MRSP) authorization published?
- A.
Semi-annually.
- B.
Quarterly.
- C.
Monthly.
- D.
Annually.
Correct Answer
D. Annually.Explanation
Mobility readiness spares package (MRSP) authorization is published once a year. This means that the authorization for the availability and readiness of spares packages for mobility operations is updated and released on an annual basis.Rate this question:
-
- 36.
Which Air Force headquarters (HQ) office published mobility readiness spares package (MRSP) authorizations?
- A.
Air Combat Command (HQ ACC)/A4.
- B.
Air Mobility Command (HQ AMC/LGX).
- C.
United States Air Force (HQ USAF/LGX).
- D.
Air Force Materiel Command (HQ AFMC)/A4.
Correct Answer
C. United States Air Force (HQ USAF/LGX).Explanation
The correct answer is United States Air Force (HQ USAF/LGX). This is the headquarters office that published mobility readiness spares package (MRSP) authorizations.Rate this question:
-
- 37.
Who will authorize readiness spares package (RSP) for allocation to specific units/bases?
- A.
LRS.
- B.
SOS.
- C.
MAJCOM.
- D.
AFMC.
Correct Answer
C. MAJCOM.Explanation
MAJCOM, which stands for Major Command, is responsible for authorizing the allocation of readiness spares packages (RSP) to specific units or bases. The Major Command is a level of command in the United States Air Force that is responsible for specific geographic or functional areas. They have the authority to determine the allocation of resources, including readiness spares packages, to support the operational readiness of units and bases under their command.Rate this question:
-
- 38.
Which transaction identification code (TRIC) is used to load the serial number/control record for readiness spares package (RSP) authorizations?
- A.
ISU
- B.
MSI
- C.
1EB
- D.
1UB
Correct Answer
C. 1EBExplanation
The correct answer is 1EB. The 1EB transaction identification code (TRIC) is used to load the serial number/control record for readiness spares package (RSP) authorizations.Rate this question:
-
- 39.
Which program is an automated way of processing readiness spares package (RSP) authorizations?
- A.
S05
- B.
S07
- C.
SIFS
- D.
DIREP
Correct Answer
B. S07Explanation
S07 is the correct answer because it is the program that is specifically designed for the automated processing of readiness spares package (RSP) authorizations. The other options (S05, SIFS, DIREP) do not have a direct association with RSP authorizations.Rate this question:
-
- 40.
How are readiness spares package (RSP) data inputted authorization records received from MAJCOM?
- A.
FKD.
- B.
XSF.
- C.
XVF.
- D.
1EB.
Correct Answer
C. XVF. -
- 41.
Which program is used to perform the readiness spares package (RSP) reconciliation?
- A.
Q05
- B.
S05
- C.
R07
- D.
S07
Correct Answer
B. S05Explanation
The program used to perform the readiness spares package (RSP) reconciliation is S05.Rate this question:
-
- 42.
The decision to transfer mobility readiness spares package (MRSP) rests with the host and the
- A.
Losing accountable officer.
- B.
Losing MAJCOM.
- C.
Gaining MAJCOM.
- D.
Gaining accountable officer.
Correct Answer
C. Gaining MAJCOM.Explanation
The decision to transfer mobility readiness spares package (MRSP) rests with the gaining MAJCOM. This means that the responsibility for determining whether or not to transfer the MRSP lies with the Major Command that is receiving the package. The host and losing accountable officer may be involved in the process, but ultimately it is the gaining MAJCOM that has the final say in the decision.Rate this question:
-
- 43.
What transaction identification code (TRIC) is processed to transfer between mobility readiness spares package (MRSP) and war reserve materiel (WRM) detail records?
- A.
DOR
- B.
ISU
- C.
1EB
- D.
1KT
Correct Answer
D. 1KTExplanation
The transaction identification code (TRIC) that is processed to transfer between mobility readiness spares package (MRSP) and war reserve materiel (WRM) detail records is 1KT.Rate this question:
-
- 44.
What action code is used when transferring multiple quantities from a mobility readiness spares package (MRSP) or war reserve materiel (WRM) detail record?
- A.
A
- B.
B
- C.
S
- D.
M
Correct Answer
D. MExplanation
The action code "M" is used when transferring multiple quantities from a mobility readiness spares package (MRSP) or war reserve materiel (WRM) detail record. This suggests that the "M" action code is specifically designated for transferring multiple quantities, as opposed to the other options (A, B, and S) which may be used for different purposes or scenarios.Rate this question:
-
- 45.
When processing transaction identification code (TRIC) 1KT, what occurs if the gaining detail record asset and the action quantity exceed the authorized quantity?
- A.
Reject
- B.
Back order
- C.
Management notice
- D.
Record reversal and correction actions
Correct Answer
A. RejectExplanation
If the gaining detail record asset and the action quantity exceed the authorized quantity when processing TRIC 1KT, the system will reject the transaction.Rate this question:
-
- 46.
Which program involves shelf life controls and other inspection functions for readiness spares package (RSP) assets?
- A.
TAV
- B.
SIFS
- C.
COSIS
- D.
DIREPS
Correct Answer
C. COSISExplanation
COSIS involves shelf life controls and other inspection functions for readiness spares package (RSP) assets.Rate this question:
-
- 47.
Which system do inventory managers use to formulate readiness spares package (RSP) levels?
- A.
Personal computer aircraft sustainability module (PC–ASM).
- B.
Consumable readiness spares packages (CRSP).
- C.
Mobility readiness spares packages (MRSP).
- D.
In-place readiness spares packages (IRSP).
Correct Answer
A. Personal computer aircraft sustainability module (PC–ASM).Explanation
Inventory managers use the Personal computer aircraft sustainability module (PC–ASM) to formulate readiness spares package (RSP) levels. This system helps them determine the appropriate levels of spares needed to maintain aircraft sustainability and readiness. It is a computer-based tool that enables inventory managers to track and manage inventory, forecast demand, and optimize the allocation of resources. By using PC–ASM, inventory managers can ensure that the right spares are available when needed, minimizing downtime and maximizing operational efficiency.Rate this question:
-
- 48.
Who has the responsibility for operation of a weapons storage facility when mobilization is authorized?
- A.
Deployment and distribution activity.
- B.
Materiel management activity.
- C.
Squadron readiness.
- D.
War Readiness.
Correct Answer
B. Materiel management activity.Explanation
The responsibility for operation of a weapons storage facility when mobilization is authorized lies with the Materiel management activity. Materiel management activities are responsible for the planning, coordination, and execution of all activities related to the management of military equipment and supplies. This includes the storage, distribution, and maintenance of weapons in storage facilities during times of mobilization.Rate this question:
-
- 49.
Which product is used to manage and account for small arms and light weapons (SA/LW)?
- A.
Weapons registry.
- B.
Organizational visibility list.
- C.
Organizational equipment listing.
- D.
Custodian authorization/custody receipt listing.
Correct Answer
D. Custodian authorization/custody receipt listing.Explanation
The correct answer is "Custodian authorization/custody receipt listing." This product is used to manage and account for small arms and light weapons (SA/LW). It helps keep track of who has custody of the weapons and ensures that proper authorization and receipts are obtained when transferring the weapons to different individuals or organizations. This listing helps maintain accountability and control over SA/LW.Rate this question:
-
- 50.
Who can direct small arms and light weapon (SA/LW) transfers from one accountable activity to another within or outside the Air Force?
- A.
Defense Supply Center Columbus (DSCC).
- B.
Command Equipment Management Office (CEMO).
- C.
Air Force Materiel Command Small Arms and Light Weight (AFMC SA/LW) function.
- D.
Air Force Materiel Command Supply Chain Management Retail (AFMC SCM-R) Equipment Activity.
Correct Answer
C. Air Force Materiel Command Small Arms and Light Weight (AFMC SA/LW) function.Explanation
The Air Force Materiel Command Small Arms and Light Weight (AFMC SA/LW) function is responsible for directing small arms and light weapon transfers from one accountable activity to another within or outside the Air Force. This function ensures proper management and control of these weapons, ensuring they are transferred securely and in accordance with regulations. The Defense Supply Center Columbus (DSCC), Command Equipment Management Office (CEMO), and Air Force Materiel Command Supply Chain Management Retail (AFMC SCM-R) Equipment Activity are not specifically mentioned as having this authority.Rate this question:
-
Back to top