Nkba AKBD K+b Design Presentation
- 1.Kitchen and Bath Floor Plans, Mechanical Plans and Construction Plans are drawn as if they were viewed at what height?
- A.
48" above the floor
- B.
60" above the floor
- C.
96" above the floor
- D.
Ceiling height
- 2.Kitchen and Bath floor plans, Mechanical Plans and Construction Plans are drawn to what scale?
- A.
1/2" = 1.5'
- B.
1/2" = 1'-0"
- C.
1/4" = 1'-0"
- D.
1/8" = 1'-0"
- 3.You have a better chance of accurate dimensions if the measurements are made at which point of construction?
- A.
Floor plan
- B.
Studs are marked on the floor
- C.
Studs are set
- D.
Drywall is up but not finished
- 4.You forgot your framing square but you have a mental framing square, the pythagorean theorem. Which formula would you use to see if a corner is square?
- A.
6-8-8
- B.
6-8-9
- C.
6-8-10
- D.
6-10-12
- 5.Your hand drawings are too smudged. You are currently using a pencil marked HB for the hardness of the lead. You need to find a lead that will give you crisper lines. Your best choice would be which one of the following?
- A.
F
- B.
B
- C.
2B
- D.
4B
- 6.When hand drafting, vertical lines should be drawn by which method?
- A.
With the long edge of a triangle.
- B.
With one vertical leg of a triangle while the other leg is resting on a horizontal bar.
- C.
Lining the horizontal leg of the triangle up with the title block while drawing the vertical line.
- D.
Lining the long leg up with a vertical line on graph paper.
- 7.A triangle with all angles less than 90 degrees is called a ___ triangle
- A.
Right
- B.
Left
- C.
Obtuse
- D.
Acute
- 8.You need to send a detail drawing to your cabinet factory for a custom built cabinet required for your next bath project. To make sure the drawing is easy to understand and drawn to scale, which of the following do you choose?
- A.
30 degrees oblique
- B.
45 degree dimetric
- C.
Trimetric
- D.
30 degree isometric
- 9.How far apart should dimension lines be spaced on your drawing?
- A.
Minimum 1/16"
- B.
Minimum 1/8"
- C.
Minimum 3/16"
- D.
Minimum 1/4"
- 10.Which one of the items below must be listed in the floor plan specification list?
- A.
3DB18
- B.
SB42/TOT
- C.
WR3612
- D.
DCW2430
- 11.Be sure to always protect your work by copyrighting your drawings. This would prevent anyone else from legally using your plans without your permission. What is the proper way to copyright a drawing?
- A.
Online at www.copyright/usgov.gov
- B.
Contact a Copyright/Patent Lawyer
- C.
Date and add your seal
- D.
Example COPYRIGHT c 2007 JOE SMITH
- 12.A drawing with the proper copyright notation will protect your work for how long?
- A.
70 years after your death
- B.
Forever
- C.
25 years
- D.
Until your death
- 13.Re: titling a drawing. What type of drawing must we never call our drawings?
- A.
Never refer to a design plan as an architectural drawing.
- B.
Never refer to a design plan as an architectural design
- C.
Never refer to a design plan as an architectural background or phase.
- D.
All of the above.
- 14.Define photorealism.
- A.
Style of computer rendering that looks like a photgaph. Items in the rendering look like the actual items, depicting spaces, materials, and textures.
- B.
A type of photography style to depict the finished space using computer software and film.
- C.
A painting style that is realistic like a photograph.
- D.
None of the above.
- 15.What is the difference between a raster image and a vector image.
- A.
A raster image is a bitmap created by drawing with software including .jpeg, .jpg, .bmp, .tiff, .gif, .png, PCX and PCS. Vector images are developed so they can be scaled up or down without losing quality.
- B.
Both are digital sizes of an image when it's measured in kilobytes, megabytes or gigabytes. They are proportion to the image's pixel dimension.
- C.
Raster images are used to determine clarity, color brilliance and accuracy of motion you experience on screen. Vector images are premium and recommended for CAD programs.
- D.
None of the above.
- 16.How does BIM work in a software program?
- A.
Building Information Modeling is software that links to a database of project information creating virtual three-dimensional model of the structure. The software is dynamic; one command affects another and makes changes on corresponding pages.
- B.
Building Information Modeling is software that links to a database of project information creating virtual three-dimensional model of the structure. The software is independent of the information entered, changes made can not be shared or updated.
- C.
None of the above.
- D.
All of the above.
- 17.How are new windows indicated on the construction plan?
- A.
Casing to casing dimensions
- B.
Width in feet and inches with height in feet and inches, ie. 3640.
- C.
Dimension to center points.
- D.
All of the above.
Recent Quizzes
Featured Quizzes
Back to top