Trivia Questions Quiz On Packaging And Assembly!

20 Questions | Total Attempts: 92

SettingsSettingsSettings
Please wait...
Trivia Questions Quiz On Packaging And Assembly!

When it comes to goods that are being transported, the final step involves packaging and assembly for dispatch. There is a way in which you can pack a good that the final consumer will keep buying the good as opposed to one that is not packaged correctly. Take up this test and see how much you know about packaging and assembly!


Questions and Answers
  • 1. 
    Where does the Assembly paperwork operator obtain work order packets from?
    • A. 

      Assembly Boxing

    • B. 

      Uppers Area

    • C. 

      Robot Line

  • 2. 
    Assembler verifies skid contents (including correct boxes) to the work order BOM.  Which procedure specifically states this?
    • A. 

      MASP 301

    • B. 

      MASP 300

    • C. 

      QAF 501

    • D. 

      MQAF 302

  • 3. 
    What color dot identifies a "special packaging order"
    • A. 

      Red Orange

    • B. 

      Blue

    • C. 

      Green

    • D. 

      Yellow

  • 4. 
    Shipping labels print automatically.
    • A. 

      True

    • B. 

      False

  • 5. 
    Licenses print on demand.
    • A. 

      True

    • B. 

      False

  • 6. 
    A Shipping label and a ___________ _______________ are required for each skid.
    • A. 

      Sale Bill

    • B. 

      License Plate

    • C. 

      Identification tag

    • D. 

      Shipment verification

  • 7. 
    What do you do if there is significant differences in weights between skids for an order?
    • A. 

      Let the material handler know

    • B. 

      Notate the difference on the work order

    • C. 

      Check entire skid, including the piece part boxes for missed parts, duplication of parts, wrong parts

    • D. 

      No nothing

  • 8. 
    Work order packets include:
    • A. 

      Serial tags, invoice, weight sheet

    • B. 

      Router, weight sheet, serial tags

    • C. 

      Weight sheet, router, work order

    • D. 

      Production cards, work order, serial tags

  • 9. 
    What is MASF1002?
    • A. 

      Build list/serial tag log form

    • B. 

      Box inspection form

    • C. 

      Oshkosh inspection form

    • D. 

      Shrink wrap procedure

  • 10. 
    What Rev is "special packaging" at?
    • A. 

      2

    • B. 

      16

    • C. 

      23

    • D. 

      22

  • 11. 
    For Huck/torque beam assembly, a mark is placed on the hanger clevis or wing, beam clevis, widget (if applicable), and bag plate.  Why do you do this?
    • A. 

      Customer requirement

    • B. 

      To assist in counting parts

    • C. 

      To ensure proper alignment on the same side of the assembly

  • 12. 
    Where is the process of "placing the paint dot on" done?
    • A. 

      At the bushing press

    • B. 

      Immediately following paint before parts are placed on the huck table

    • C. 

      At the huck table

    • D. 

      After parts have been placed on pallets

  • 13. 
    If boxes are not available for an order, the order should be transacted and placed in teh shipping area prior to boxes being completed.
    • A. 

      True

    • B. 

      False

  • 14. 
    In the event the box scale is not functional, the paperwork operator should disregard the boxes required for the order and ship the parts that we do have available.
    • A. 

      True

    • B. 

      False

  • 15. 
    All SFK's require hangers only if that is all that is indicated on the production card.
    • A. 

      True

    • B. 

      False

  • 16. 
    Pallets are a good item to use to reach higher due to their stability.
    • A. 

      True

    • B. 

      False

  • 17. 
    Huck bolts always go in with the round head of the bolt on the same side as the clevis.
    • A. 

      True

    • B. 

      False

  • 18. 
    The dash 2, right-hand beam: widget (if applicable), bag plate, and clevis are on the left side.
    • A. 

      True

    • B. 

      False

  • 19. 
    According to the Assembly Control Plan (CP-05), WC 135, which inspection instruction is to be used?
    • A. 

      135ii-02

    • B. 

      180ii-01

    • C. 

      135ii-01

    • D. 

      122ii-01

  • 20. 
    Review the BOM according to any specific assembly or shipping instructions under what area?
    • A. 

      The "Routing Extended Description"

    • B. 

      The Main Header of the BOM

    • C. 

      Within the body of the BOM

    • D. 

      The "Special Packaging" section of the BOM

Related Topics
Back to Top Back to top