CDC 1p071 Z
This is an electronic version of the new Z1P071 upgrade training CDC Volume URE Questions. This is an aid to help those who would prefer to use electronic means of study, and is in no way a definitive alternative to reading the CDC. This is a supplemental study aid ONLY. Read the entire volume of Z1P071 to gain a complete grasp of the material.
- 1.
As a supervisor, prior to assigning individuals their work duties, you should
- A.
Erase all tasks in the individual’s on-the-job training (OJT) records.
- B.
Evaluate the individual’s OJT records.
- C.
Train the individual on the task.
- D.
Perform a task evaluation.
Correct Answer
B. Evaluate the individual’s OJT records. -
- 2.
When assigning unit numerical designations for USAF organizations, which priority focuses on preserving units that trace their heritage to the original (pre–1939) Air Force formations?
- A.
First.
- B.
Second.
- C.
Third.
- D.
Fourth.
Correct Answer
A. First. -
- 3.
Who is responsible for organizing the Air Force?
- A.
Secretary of Defense (SECDEF).
- B.
Secretary of the Air Force (SAF).
- C.
Chief of Staff of the Air Force (CSAF).
- D.
Deputy Chief of Staff, Manpower, Personnel and Services (AF/A1).
Correct Answer
B. Secretary of the Air Force (SAF). -
- 4.
What type of manpower standard is typically developed for a function that deviates significantly from the norm?
- A.
Air Force standards.
- B.
Command standards.
- C.
Single location standards.
- D.
Geographically-separated unit standards.
Correct Answer
C. Single location standards. -
- 5.
A detailed manpower listing reflecting authorizations or slots by work center is a unit
- A.
Manpower listing.
- B.
Manpower document.
- C.
Personnel management listing.
- D.
Personnel management roster.
Correct Answer
B. Manpower document. -
- 6.
Which manpower document is produced and administered at the base level and provides a means to monitor unit manning and controlling incoming and intra-unit assignments?
- A.
Unit manpower listing.
- B.
Unit manpower document.
- C.
Unit personnel management listing.
- D.
Unit manpower personnel roster.
Correct Answer
D. Unit manpower personnel roster. -
- 7.
How many years of experience fitting aircrew helmets, oxygen masks, and working with aviator flight equipment must civilian personnel performing equipment inspection and maintenance duties possess?
- A.
1.
- B.
2.
- C.
3.
- D.
4.
Correct Answer
C. 3. -
- 8.
When the performance work standard (PWS) or statement of work (SOW), new or revised, contain aircrew flight equipment (AFE) services, who must review and approved them prior to their implementation?
- A.
MAJCOM AFE functional manager (FM).
- B.
Training pipeline manager.
- C.
Career field manager (CFM).
- D.
Aircrew flight equipment superintendent.
Correct Answer
A. MAJCOM AFE functional manager (FM). -
- 9.
What is the underlying purpose of a composite tool kit (CTK) program?
- A.
Save time when working with tools.
- B.
Keep equipment in good condition.
- C.
Eliminate foreign object damage.
- D.
Help keep facilities clean.
Correct Answer
C. Eliminate foreign object damage. -
- 10.
What instruction covers the management of a composite tool kit (CTK) program?
- A.
TO 32–1–101, Maintenance & Care of Hand Tools.
- B.
AFI 11–301, Aircrew Flight Equipment (AFE) Operations.
- C.
AFI 21–101, Aircraft and Equipment Maintenance Management.
- D.
AFI 10–601, Mission Needs and Operations Requirements Guidance and Procedures.
Correct Answer
C. AFI 21–101, Aircraft and Equipment Maintenance Management. -
- 11.
The master inventory list (MIL) remains valid until
- A.
One year after the initial inspection.
- B.
The monthly inspection.
- C.
Personnel change.
- D.
The contents change.
Correct Answer
D. The contents change. -
- 12.
When, if ever, may consumables, such as halocarbons, be placed in composite tool kits (CTK)?
- A.
If they are identified on the master inventory list (MIL) as consumables.
- B.
If they are unable to leak and cause damage to the CTK.
- C.
If they are used up completely before the end of the day.
- D.
At no time, consumables may never be placed in a CTK.
Correct Answer
A. If they are identified on the master inventory list (MIL) as consumables. -
- 13.
How often should a comprehensive inspection of all composite tool kit (CTK) be completed?
- A.
Daily.
- B.
Weekly.
- C.
Monthly.
- D.
Annually.
Correct Answer
D. Annually. -
- 14.
Within aircrew flight equipment (AFE), who is tasked to manage the time compliance technical order (TCTO) program to ensure satisfactory integration of AFE with aircrew recovery systems?
- A.
AFE quality assurance (QA).
- B.
AFE superintendent.
- C.
Flight equipment officer (FEO).
- D.
Noncommissioned officer in charge (NCOIC).
Correct Answer
A. AFE quality assurance (QA). -
- 15.
Once the development process flow has produced a time compliance technical order (TCTO), who receives and date stamps the TCTO?
- A.
Wing plans office.
- B.
Quality assurance (QA).
- C.
Technical order distribution account (TODA).
- D.
Wing plans, scheduling, and documentation (PS&D) section.
Correct Answer
B. Quality assurance (QA). -
- 16.
Time compliance technical order (TCTO) kits are not necessary for
- A.
Urgent action TCTOs.
- B.
Routine action TCTOs.
- C.
Emergency action TCTOs.
- D.
Condition or inspection TCTOs.
Correct Answer
D. Condition or inspection TCTOs. -
- 17.
Who is responsible for ensuring at least one 1P071 (or civilian equivalent) is appointed to fill the aircrew flight equipment (AFE) quality assurance (QA) inspector position?
- A.
Wing commander.
- B.
Group commander.
- C.
Squadron commander.
- D.
AFE superintendent.
Correct Answer
B. Group commander. -
- 18.
The results of no-notice quality assurance (QA) inspection must be documented
- A.
On locally developed forms.
- B.
On AF IMT Form 2420.
- C.
In the Flight Equipment Records Management System (FERMS).
- D.
In the Aircrew Flight Equipment Quality Assurance Program (AFEQAP).
Correct Answer
D. In the Aircrew Flight Equipment Quality Assurance Program (AFEQAP). -
- 19.
As a minimum expectation, what percentage, if any, of post-flight equipment requires quality control inspection (QCI)?
- A.
100.
- B.
50.
- C.
10.
- D.
0.
Correct Answer
D. 0. -
- 20.
How are in-process inspections (IPI) documented?
- A.
On AF IMT Form 2420.
- B.
On locally developed forms.
- C.
In the Flight Equipment Records Management System (FERMS).
- D.
In the Aircrew Flight Equipment Quality Assurance Program (AFEQAP).
Correct Answer
B. On locally developed forms. -
- 21.
What is the single largest factor in generating a quality aircrew flight equipment (AFE) technician?
- A.
Hands-on training.
- B.
Upgrade training.
- C.
Proper training.
- D.
Refresher training.
Correct Answer
C. Proper training. -
- 22.
The Career Field Education and Training Plan (CFETP) consists of how many main parts?
- A.
1.
- B.
2.
- C.
3.
- D.
4.
Correct Answer
B. 2. -
- 23.
Which part and section of the Career Field Education and Training Plan (CFETP) identifies career field progression information, duties and responsibilities, training strategies, and career field path?
- A.
Part I, section A.
- B.
Part II, section A.
- C.
Part I, section B.
- D.
Part III, section B.
Correct Answer
C. Part I, section B. -
- 24.
Where is the proficiency code key located?
- A.
CFETP.
- B.
STS.
- C.
MTP.
- D.
MTL.
Correct Answer
B. STS. -
- 25.
When documenting training, what do you use to indicate the individual can perform the task without assistance and meets local demands for accuracy, timeliness, and correct use of procedures?
- A.
Qualified.
- B.
Ready.
- C.
Go.
- D.
Signed off.
Correct Answer
C. Go. -
- 26.
Which Part of the Career Field and Training Plan (CFETP) is mandatory in individual training records?
- A.
Part I.
- B.
Part II.
- C.
Part III.
- D.
Part IV.
Correct Answer
B. Part II. -
- 27.
In the proficiency code chart, the subject knowledge scale values consist of
- A.
Lower case letters.
- B.
Upper case letters.
- C.
Numbers and lower case letters.
- D.
Numbers and upper case letters.
Correct Answer
B. Upper case letters. -
- 28.
What document is used to expand a section in the Career Field Education and Training Plan (CFETP)?
- A.
Job Qualification Standard (JQS).
- B.
Career development course (CDC).
- C.
Training Business Area (TBA).
- D.
Specialty training standard (STS).
Correct Answer
A. Job Qualification Standard (JQS). -
- 29.
What document provides a list of all tasks performed in a work center?
- A.
Qualification Training (QT).
- B.
Master training plan (MTP).
- C.
Master task list (MTL).
- D.
Job Qualification Standard (JQS).
Correct Answer
C. Master task list (MTL). -
- 30.
Who approves the Air Force master lesson plans (AFMLP) used to conduct aircrew flight equipment continuation training (AFECT)?
- A.
361 TRS/TRR.
- B.
Lead mission designator series (MDS) major command (MAJCOM).
- C.
Air Education and Training Command (AETC) AFE functional manager (FM).
- D.
Aircrew flight equipment superintendent (AFES).
Correct Answer
B. Lead mission designator series (MDS) major command (MAJCOM). -
- 31.
How frequently must the group flight equipment officer (FEO) or aircrew flight equipment (AFE) superintendent review the AFE master lesson plans and instructor lesson plans?
- A.
Annually.
- B.
Semiannually.
- C.
Quarterly.
- D.
Monthly.
Correct Answer
A. Annually. -
- 32.
Which publication establishes specific requirements and applies to all aircrew flight equipment continuation training instructors (AFECTI), aircrew, and personnel who fly?
- A.
AFI 11–301.
- B.
AFI 90–821.
- C.
AFI 91–201.
- D.
AFI 91–202.
Correct Answer
A. AFI 11–301. -
- 33.
Which aircrew flight equipment continuation training (AFECT) course is specifically for those members flying in non-ejection seat aircraft?
- A.
LL01.
- B.
LL02.
- C.
LL03.
- D.
LL04.
Correct Answer
C. LL03. -
- 34.
Aircrew flight equipment instructors (AFECTI) must meet minimum formal training requirements and be assigned using guidelines established by their respective
- A.
Unit NCOICs.
- B.
DOD directives.
- C.
Major commands.
- D.
Group commanders.
Correct Answer
C. Major commands. -
- 35.
Who controls and manages the wing’s aircrew flight equipment (AFE) formal supplemental course allocations?
- A.
Unit NCOICs.
- B.
DOD directives.
- C.
Major commands.
- D.
Group flight equipment officer (FEO) or AFE superintendent (AFES).
Correct Answer
D. Group flight equipment officer (FEO) or AFE superintendent (AFES). -
- 36.
Which items may be purchased using cost per flying hour (CPFH) funds?
- A.
Flight jackets.
- B.
Clip/knee boards.
- C.
Helmet bags.
- D.
Flight gloves.
Correct Answer
D. Flight gloves. -
- 37.
What method is used to determine if an item is eligible for Air Force Cost Analysis Improvement Group /cost per flying hour (AFCAIG/CPFH) funding?
- A.
Maintenance.
- B.
Operations.
- C.
Decision-tree.
- D.
Consumable.
Correct Answer
C. Decision-tree. -
- 38.
When budgeting resources, authorizations are the
- A.
Maximum essential quantity required to accomplish your assigned AF mission or to accomplish your duties.
- B.
Minimum essential quantity required to accomplish your assigned AF mission or to accomplish your duties.
- C.
Minimum allowable quantity you would normally need to perform your mission.
- D.
Maximum allowable quantity you would normally need to perform your mission.
Correct Answer
B. Minimum essential quantity required to accomplish your assigned AF mission or to accomplish your duties. -
- 39.
What system does Air Force policy mandate to be used for the development, validation, and use of equipment allowances, authorizations, accountable records, reports, and related management products?
- A.
Air Force Equipment Management System (AFEMS).
- B.
Flight Equipment Records Management System (FERMS).
- C.
Air Force Records Information Management System (AFRIMS).
- D.
Integrated Maintenance Data System (IMDS).
Correct Answer
A. Air Force Equipment Management System (AFEMS). -
- 40.
Which allowance source code (ASC) applies to unit type code (UTC) or mobility commitment?
- A.
A.
- B.
B.
- C.
C.
- D.
D.
Correct Answer
A. A. -
- 41.
Which allowance standard is used for aircrew flight equipment base use items?
- A.
A.
- B.
B.
- C.
C.
- D.
D.
Correct Answer
B. B. -
- 42.
The R–14, customer authorization and custody receipt listing (CA/CRL) serves as a custody receipt when signed by the
- A.
Custodian.
- B.
Commander.
- C.
Custodian and commander.
- D.
Primary and alternate custodians.
Correct Answer
C. Custodian and commander. -
- 43.
In reference to the time change item (TCI) budgeting and procurement process, which publication describes the types of time change items that require annual forecasts?
- A.
TO 00–5–1.
- B.
TO 00–5–15.
- C.
TO 00–20–9.
- D.
AFI 11–301, Volume 1.
Correct Answer
C. TO 00–20–9. -
- 44.
The primary method of time change items budgeting forecast submission is the
- A.
AFTO Form 2430.
- B.
AFTO Form 2420.
- C.
AFTO Form 223.
- D.
AF Form 602.
Correct Answer
C. AFTO Form 223. -
- 45.
What time frames do time change items forecasts use as a break out?
- A.
Daily.
- B.
Monthly.
- C.
Quarterly.
- D.
Annually.
Correct Answer
C. Quarterly. -
- 46.
Who determines the need for additional forecast data to assure assets are available to meet replacement requirements?
- A.
Item managers.
- B.
Cost center managers.
- C.
Career field managers.
- D.
Work center supervisors.
Correct Answer
A. Item managers. -
- 47.
How frequently are life-sustaining items forecasted?
- A.
Daily.
- B.
Monthly.
- C.
Quarterly.
- D.
Annually.
Correct Answer
D. Annually. -
- 48.
When forecasting for conventional munitions, what category is used for aircrew flight equipment (AFE) munitions used as build-up to support new aircraft or aircrew?
- A.
A.
- B.
D.
- C.
K.
- D.
T.
Correct Answer
D. T. -
- 49.
Who is authorized to submit a requirement to start the acquisition process?
- A.
Aircrew flight equipment superintendent (AFES) or flight equipment officer (FEO).
- B.
Major commands level staff.
- C.
Supervisors.
- D.
Anyone.
Correct Answer
B. Major commands level staff. -
- 50.
Within aircrew flight equipment (AFE), who is authorized to negotiate or agree to buy an item from a company?
- A.
Aircrew flight equipment superintendent (AFES) or flight equipment officer (FEO).
- B.
Major commands.
- C.
Supervisors.
- D.
Anyone.
Correct Answer
B. Major commands. -
Quiz Review Timeline +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Mar 21, 2022Quiz Edited by
ProProfs Editorial Team -
Jun 23, 2017Quiz Created by
CaddyMcWompus
- ACA Quizzes
- ACCA Quizzes
- ACE Quizzes
- BCBA Quizzes
- CCP Quizzes
- CDCs Quizzes
- CEH Quizzes
- CISA Quizzes
- CISCO Quizzes
- CISSP Quizzes
- CompTIA Quizzes
- CPA Quizzes
- CPAT Quizzes
- CPFA Quizzes
- CPP Quizzes
- CPT Quizzes
- CSA Quizzes
- CSET Quizzes
- CST Quizzes
- CSWIP Quizzes
- FTCE Quizzes
- HIPAA Quizzes
- IAHCSMM Quizzes
- ISTQB Quizzes
- LEED Ga Quizzes
- MBLEx Quizzes
- TEAS Quizzes
Back to top