FSG Quiz #9 18.12.2016

11 Questions | Total Attempts: 45

SettingsSettingsSettings
Please wait...
FSG Quiz #9 18.12.2016


Questions and Answers
  • 1. 
    What is the minimal wall thickness for tubing material of the Main hoop?
    • A. 

      1,6mm

    • B. 

      2mm

    • C. 

      2,54mm

    • D. 

      2,5mm

  • 2. 
    What is not an element of the FSG event? 
    • A. 

      Executive Summary

    • B. 

      Mechanical Scrutineering

    • C. 

      Deep Dive Topic

    • D. 

      Business Logic Case

  • 3. 
    How many team members are allowed to present the cost report real case? 
    • A. 

      Maxmimum two team members

    • B. 

      Only the team captain

    • C. 

      There is no specified limit

  • 4. 
    A racecar is going through a left corner with a radius of 20m at a velocity of 50 km/h. Additionally the brakes generate a deceleration of 7,5 m/s^2. The Rollcenter height of the car is 20mm and the COG is located 300mm above the Rollcenter. The weight and the Roll stiffness distribution is both 50%, track width is 1,3m and the wheelbase value is 1,7m. The mass of the car is 350kg with driver.Which is the right wheel load distribution? 
    • A. 

      FR=1525,91 FL=689,96 RR=1026,79 RL=195,84

    • B. 

      FR=1525,91 FL=689,96 RR=1026,79 RL=185,84

    • C. 

      FR=1 525,91 FL=899,96 RR=1 026,79 RL=1 95,84

    • D. 

      FR=1525,91 FL=699,96 RR=1026,79 RL=195,84

    • E. 

      FR=1521 ,1 3 FL=689,75 RR=1027 RL=195,63

  • 5. 
    The scoring points at the Static Events sum up to 325 points. How many points are possible in each category? 
    • A. 

      Presentation: 75, Engineering Design: 150, Cost Analysis: 100

    • B. 

      Presentation: 100, Engineering Design: 150, Cost Analysis: 75

    • C. 

      Presentation: 150, Engineering Design: 125, Cost Analysis: 50

    • D. 

      Presentation: 75, Engineering Design: 125, Cost Analysis: 75

  • 6. 
    What information is required on the FSG business plan executive summary? 
    • A. 

      Team name

    • B. 

      University

    • C. 

      Car number

  • 7. 
    The Main Roll Hoop braces must be attached as near as possible to the top of the Main Roll Hoop but no more than which distance below the topmost surface of the Main Roll Hoop? 
    • A. 

      160mm

    • B. 

      No limit

    • C. 

      6inch

    • D. 

      150mm

    • E. 

      165mm

  • 8. 
    In order to have a protest considered, a team must post a point protest bond which will be forfeited if their protest is rejected. How high is this bond? 
    • A. 

      25 Points

    • B. 

      35 Points

    • C. 

      30 Points

    • D. 

      15 Points

    • E. 

      10 Points

    • F. 

      50 Points

  • 9. 
    Which of the answers below is wrong? 
    • A. 

      Failure of a team member to follow an instruction or command directed specifically to that team or team member will result in a twenty five (25) point penalty.

    • B. 

      Argument with, or disobedience to, any official may result in the team being eliminated from the competition.

    • C. 

      N the event of unsportsmanlike conduct a second violation will result in expulsion of the team from the competition.

    • D. 

      Teams which do not obey to reservation of place of other teams on the campsite will not be allowed to come on the campsite in the next season anymore

    • E. 

      Alcohol, illegal drugs, weapons or other illegal material are prohibited on the event site. Any violation of this rule by a team member will cause the expulsion of the entire team

  • 10. 
    The included angle formed by the Main Hoop and the Main Hoop braces must be at least... 
    • A. 

      Thirty degrees (30°)

    • B. 

      Twenty degrees (20°)

    • C. 

      Thirty two degrees (32°)

    • D. 

      Thirty five degrees (35°)

    • E. 

      Twenty five degrees (25°)

  • 11. 
    Which value has the quotient of Front Brake Force to Rear Brake Force for a car with a wheelbase of 1600mm, a weight distribution of 55%, a COG height of 300mm and tires with a constant μ of 1,4? It is assumed that the car is set up at ideal brake balance. Round on the first digit behind the point. 
    • A. 

      2,5

    • B. 

      2,8

    • C. 

      1,8

    • D. 

      1,7

    • E. 

      2,0

    • F. 

      3,0

    • G. 

      2,2

    • H. 

      1

    • I. 

      7

    • J. 

      4

Back to Top Back to top