Moac 70-646 ---lesson 6 Practice Quiz/Study Guide (Active Directory)
- 1.To use SCSI on a server, all of the devices and host adapters must support the same standard
- A.
True
- B.
False
- 2.Adding a NAS device to your network is a simple way to provide users with additional storage and reduce the processing burden on your servers
- A.
True
- B.
False
- 3.You can mark an existing dynamic disk as active
- A.
True
- B.
False
- 4.Converting the disk partition style is a nondestructive process
- A.
True
- B.
False
- 5.Once you change a basic disk to a dynamic disk, the only way you can change it back again is to back up the entire disk and delete the dynamic disk volumes
- A.
True
- B.
False
- 6.What is the maximum dynamic volume size for a RAID-5 volume in windows sever 2008?
- A.
2^32 (4,294,967,296) terabytes
- B.
2 terabytes
- C.
64 terabytes
- D.
62 terabytes
- 7.What is the maximum dynamic volume size for simple and mirrored volumes in windows server 2008?
- A.
2^32 (4,294,967,296) terabytes
- B.
2 terabytes
- C.
64 terabytes
- D.
62 terabytes
- 8.What is the maximum NTFS file size in windows server 2008?
- A.
2^32 (4,294,967,296) terabytes
- B.
2^44 bytes (16 terabytes) minus 64 kilobytes
- C.
2^32 minus 1 file (4,294,967,295) bytes
- D.
2^32 clusters minus 64 megabytes
- 9.What is the maximum NTFS volume size in windows server 2008?
- A.
2^32 (4,294,967,296) terabytes
- B.
2^44 bytes (16 terabytes) minus 64 kilobytes
- C.
2^32 minus 1 file (4,294,967,295) bytes
- D.
2^32 clusters minus 1 cluster
- 10.By default, the paging file on a windows server 2008 computer is ________time (s) the amount of memory installed in the computer
- A.
1
- B.
1.5
- C.
5
- D.
5.5
- 11.Shadow copies can utilize up to________percent of a volume by default
- A.
2
- B.
5
- C.
10
- D.
20
- 12.Which of the following options should be considered the minimum acceptable rotational speed fora server?
- A.
7000 rpm
- B.
9000 rpm
- C.
10,000 rpm
- D.
15,000 rpm
- 13.The newer serial ATA (SATA) standard increases the maximum transmission speed to ________MB/sec
- A.
200
- B.
225
- C.
540
- D.
640
- 14.Which fault tolerance solution uses duplicate host adapters as well as duplicate hard drives?
- A.
Disk mirroring
- B.
Disk duplication
- C.
Disk duplexing
- D.
Disk striping
- 15.Which of the following is a hard-disk partition style supported by windows server 2008?
- A.
MBR
- B.
FAT
- C.
NTFS
- D.
FAT32
- 16.The GPT disk partitioning style supports volumes up to_____exabytes
- 17.Which of the following is the preferred file system for a server?
- A.
FAT32
- B.
NTFS
- C.
GPT
- D.
FAT16
- 18.Which command prompt utility can be used to perform disk management task?
- A.
Diskpart.exe
- B.
Checkdisk.exe
- C.
Msconfig.exe
- D.
FDisk.exe
- 19.In what type of configuration does the computer write the same data identical volumes on two different disk?
- A.
Disk mirroring
- B.
Disk duplexing
- C.
Disk striping
- D.
RAID-5
- 20.For applications that use large data files, such as databases and email stores, which access is preferable?
- A.
Block I/O
- B.
File-based I/O
- C.
Server to storage
- D.
None of the above
- 21.In what type of communication can servers access storage devices over the SAN as if they are connected directly to the computer?
- A.
Server to server
- B.
Storage to storage
- C.
Server to storage
- D.
None of the above
- 22.What is the maximum transmission speed for fiber optic?
- A.
133Mbps
- B.
1 Gbps
- C.
10 Gbps
- D.
15 Gbps
- 23.Which of the following protocol layers defines the basic transport mechanism of a fibre channel network, including the frame format and three service classes; a connection-oriented class, a connectionless class with acknowledgements, and a connectionless class with acknowledgements?
- A.
FC1
- B.
FC2
- C.
FC3
- D.
FC4
- 24.Which of the following is a hardware or software device running on a computer that accesses the storage devices on the SAN?
- A.
ISCSI initiator
- B.
ISCSI target
- C.
Logical unit number (LUN)
- D.
ISCSI software Initiator
- 25.The maximum size for the memory dump file is the amount of memory installed in the computer plus ______megabyte(s)
Questions: 26 | Attempts: 1127 | Last updated: Dec 13, 2012
-
Sample QuestionThe default location for the Active Directory database and log files is C:\Windows\System32.
Questions: 5 | Attempts: 153 | Last updated: Jan 31, 2018
-
Sample QuestionMOAC Stands for?
Questions: 38 | Attempts: 80 | Last updated: Mar 18, 2013
-
Sample QuestionShadow copies is a file based fault tolerance mechanism that provides protectionagainstdisk failures
Back to top