HPE0-s22 Architecting Advanced HPE Server Solutions

98 Questions | Total Attempts: 658

SettingsSettingsSettings
HPE0-s22 Architecting Advanced HPE Server Solutions - Quiz

HPE0-S22 Architecting Advanced HPE Server Solutions


Questions and Answers
  • 1. 
    A customer's Gen9 web server resides behind a firewall. What is the most secure and efficient method to monitor this server?
    • A. 

      Use Intelligent Provisioning

    • B. 

      Use Agentless Management.

    • C. 

      Create Firewall rules and install System Management Homepage in Protected Mode

    • D. 

      Create Firewall rules and install WBEM.

  • 2. 
    A customer is considering upgrading from a BL460c Gen8 to a BL460c Gen9 server. The customer needs to retain the ESXi V5.5 boot volumes and enable UEFI secure boot mode on the new BL460c Gen 9 server. What should the architect explain to the customer?
    • A. 

      The ESXi V5.5 volume will not boot in UEFI mode.

    • B. 

      The server must be configured to support GPT boot drives

    • C. 

      ESXi V5.5 needs to be patched up to ESXi V6.

    • D. 

      Secure boot mode must be enabled and certificate installed

  • 3. 
    Refer to the exhibit. A customer has an HPE c7000 enclosure managed by HPE OneView with HP BL460c Gen9 servers in a vSphere cluster. The customer has multiple vLANs trunked from the top of rack (TOR) switches to the Virtual Connect modules in the enclosure. Due to network Access Control List (ACL) requirement and guidelines from the networking department, all network traffic should be forced to an upstream switch using the Virtual Connect "Private Network" feature. The customer reports slow network response. Which modification can the architect recommend to improve network performance?
    • A. 

      Change the FlexFabric 20/40 adapter modules with Flex 10/100 modules

    • B. 

      Change the FlexFabric adapter modules with Flex-10 adapter modules

    • C. 

      Remove the Management network from the uplinks

    • D. 

      Put the vMotion network in a separate uplink set and disable "Private Network

  • 4. 
    A customer recently purchased an HPE Moonshot chassis to host its internal website. Subsequently, the customer reports difficulties deploying new cartridges in an efficient manner. The customer suggests exchanging the solution for a more traditional server platform. What can the architect demonstrate to the customer to help solve the problem while preserving the validity of the original design solution?  
    • A. 

      How to use SCCM to provide a graphical installation method for new nodes

    • B. 

      How to use VSP to provide a graphical installation method for new nodes

    • C. 

      How to add an mRCA module to provide a graphical installation method for new nodes

    • D. 

      How to use iLO remote console to provide a graphical installation method for new nodes

  • 5. 
    An architect needs to determine whether a customer is ready to move to a software-defined data center (SDDC). Which additional information should the architect obtain from the customer to verify this?  
    • A. 

      Whether they have a disaster recovery plan implemented

    • B. 

      Whether they have a workplace mobility plan implemented

    • C. 

      Whether they have a management and automation solution implemented

    • D. 

      Whether they have standardized on a single vendor

  • 6. 
    An architect is proposing a solution that has two HPE Moonshot 1500 chassis, each of which is full of m700 cartridges. The customer needs the solution to quickly deploy the OS to cartridges, back up a golden node image, and clone the image. The customer is concerned about cost and is not interested in managing or monitoring performance of the solution. Which solution meets these requirements?  
    • A. 

      HPE Insight Cluster Management Utility (CMU)

    • B. 

      HPE Intelligent Provisioning (IP)

    • C. 

      HPE OneView 2.0

    • D. 

      HPE Insight Control server provisioning (ICsp)

  • 7. 
    A customer has an HPE c7000 chassis with the following components installed: - Cisco Fabric Extender - Fibre channel pass-through modules - BL460c Gen9 blades with LPe1605 The architect needs to allow network bandwidth control for some of the customer's critical servers and serverto- server communication for vMotion. Which modification should the architect recommend?  
    • A. 

      Replace the Fibre Channel pass-through modules with HPE Virtual Connect 16Gb modules

    • B. 

      Replace the Cisco Fabric Extender with HPE FlexFabrix 20/40 F8 modules

    • C. 

      Change the QoS setting on the Fibre Channel pass-through modules

    • D. 

      Change the setting within the Onboard Administrator to enable QoS

  • 8. 
    A customer needs a server quote for a DL Gen9 server. The requirements are as follows: - Gen9 technology with internal storage to support 12 drives - Exchange database capacity of at least 1.2TB - 512GB of LRDIMM memory - 10Gbe Ethernet support The architect is proposing the DL380 Gen9 server to meet this customer's current needs and some near future expansion. Which component should the architect add to the quote to meet the customer's requirements?  
    • A. 

      HPE 12Gb SAS Expander Card

    • B. 

      HPE SAS HBA Controller H244br

    • C. 

      HPE PCIe Workload Accelerators

    • D. 

      HPE Smart Storage Battery

  • 9. 
    A cost-conscious customer needs a server upgrade to host a Citrix application virtualization solution. The solution must meet the following requirements: - Support 1,200 simultaneous users - Scale out easily to accommodate 20 percent future growth - Provide optimum performance for applications such as Microsoft Office Suite, Skype for Business, and Adobe Photoshop Which solution should the architect recommend?  
    • A. 

      An HPE Moonshot System with m350 cartridges

    • B. 

      An HPE Integrity Superdome X System with BL920s Gen8 blades

    • C. 

      An HPE Moonshot Systems with m710 cartridges

    • D. 

      An HPE Integrity Superdome X System with BL920s Gen9 blades

  • 10. 
    A customer is deploying HPE Apollo Systems, which the customer hopes will help the organization achieve its goals for efficient energy operations. In assessing the customer maturity, the architect finds that IT staff has limited insight into how efficiently servers are operating and limited ability to enforce energy efficiency policies. Which solution should the architect recommend to help solve these issues?  
    • A. 

      HPE Advanced Power Manager

    • B. 

      HPE OneView 2.x

    • C. 

      HPE Power Advisor

    • D. 

      HPE Insight Remote Support

  • 11. 
    A customer plans to migrate from two fully depreciated high end Relational Database Management System (RDMS) servers, which are out of warranty and still under a support contract. An architect has recommended the customer migrate to four new HPE Superdome X BL920 (2P/18C) blades running Microsoft SQL server. Which cost statement provides a rationale for the migration?  
    • A. 

      Based on the TCO/ROI analysis for this project, the Apollo 4510 System makes a better choice as a SQL Database server platform for this migration

    • B. 

      The amount of savings from not renewing the service contract on the existing equipment can pay for the new hardware in just a little over three years

    • C. 

      The NPV of -$100,000 USD more than justifies the purchase price of the new equipment

    • D. 

      The IRR for this proposal would have to be extended out for ten years to make sense, as the IRR value for the first three years is nearly 20 percent

  • 12. 
    A customer needs a new system to be managed so that OS installations, driver installations, and scripted applications can be controlled from a central point. Parallel deployment jobs are also an important requirement for the customer. Which management software should the architect propose to meet the customer's needs?  
    • A. 

      HPE iLO REST API

    • B. 

      HPE Insight Control server provisioning

    • C. 

      HPE Intelligent Provisioning

    • D. 

      HPE Smart Update Manager

  • 13. 
    An architect is planning an HPE Moonshot System to host a customer Hadoop MapReduce2 application. The architect originally proposed the following: * m710cartridges * HPE 45XGc switches * HPE 4-QSFP+ Uplink Modules The customer now needs each HPE Moonshot chassis to provide at least 1TB of memory and 40TB or local storage. Cartridge nodes needs two 10GbE ports each. What does the architect need to replace in the solution to meet the customer's new requirements?  
    • A. 

      M710 cartridges with m350 Cartridge, which provide more memory

    • B. 

      M710 cartridges with m710p cartridges, which support higher capacity local drives

    • C. 

      45XGc switches with 180G switches, which provide the required two 10GbE ports to the cartridges

    • D. 

      4-QSFP+ Uplink Modules with 16-SFP+ Uplink Modules, which provide 10GbE ports to the cartridges

  • 14. 
    An architect is designing a data center solution that contains an HPE BladeSystem for the virtual application, infrastructure, and VDI environment. It also contains an HPE Moonshot for the web servers. In which parts of the HPE Transformation Area does this solution fit?  
    • A. 

      Empower and protect

    • B. 

      Transform and empower

    • C. 

      Enable and empower

    • D. 

      Transform and protect

  • 15. 
    HPE Moonshot 180G Switch Modules and HPE Moonshot 16-SFP+ Uplink Modules. A customer is planning to replace its DAS-based third-party server solution with an HPE  BladeSystem solution using FlexFabric connected to an iSCSI based HPE StoreVirtual 3200. Which method should the architect recommend for migrating data from the old system to the new system?  
    • A. 

      Use Peer Motion with a temporary 180-day license

    • B. 

      Use Business Copy software licensed to the current total size of all DAS storage

    • C. 

      Use Virtual Copy software

    • D. 

      Use a LAN-based file transfer method

  • 16. 
    View the Exhibit. Refer to the exhibit. An architect is planning an HPE Moonshot System with m710 cartridges to support a customer application virtualization solution. The customer indicated that the maximum acceptable response time for the solution is three seconds. The architect has implemented a POC and tested a single cartridge with different numbers of user sessions. The architect monitored resource utilization throughout the tests. The results of the test with the point at which the response time exceeded three seconds are shown, marked as the "VSI max." What should the architect conclude from this test?  
    • A. 

      CPU becomes a limiting factor around 50 sessions, so the architect should propose at least one cartridge per 45 or 50 users.

    • B. 

      None of the monitored resources shows signs of being a bottleneck, so the architect should consider other factors such as the HPE Moonshot switch module.

    • C. 

      The network adapter becomes a bottleneck before other resources, so the architect should propose m710p cartridges, which provide 10GbE ports.

    • D. 

      The memory becomes a bottleneck before other resources, so the architect should propose m400 cartridges, which provide a higher memory capacity.

  • 17. 
    A customer needs an HPE Apollo 6000 solution and Remote Direct Memory Access (RDMA). Which network interconnects should the architect recommend for this solution? (Choose two.)  
    • A. 

      GbEthernet

    • B. 

      Infiniband

    • C. 

      FlexFabric

    • D. 

      16 Gb Fibre Channel

    • E. 

      12G SAS

  • 18. 
    An architect is planning an HPE Integrity Superdome X solution. One nPartition will include two HPE BL920s Gen9 blades. After discussions and testing, the architect determines that the nPartition requires more memory than initially planned. Which approach should the architect recommend to the customer to ensure optimum performance?  
    • A. 

      Provision each blade in the nPartition with the same amount of memory

    • B. 

      Add DIMMs in multiples of 12 even if this means adding more capacity than necessary

    • C. 

      Favor using lower capacity DIMMs to fill more memory slots on each channel

    • D. 

      Avoid using all memory channels on a processor

  • 19. 
    An architect is determining the amount of memory to propose for an HPE XL230a compute tray. The customer specifies several requirements, properties, and parameter of the application. Which factor will critically affect the memory amount requirement to prevent a potential memory bottleneck?
    • A. 

      The application stores data on local drives.

    • B. 

      The application requires CPUs with multiple cores to support multiple HPC jobs.

    • C. 

      The application is single-threaded high performance computing (HPC).

    • D. 

      Secure Encryption of locally stored data is required.

  • 20. 
    An architect is designing a solution, a key element of which is the capability for fast VMware cluster growth with minimal administrative interaction. Which HPE solution should the architect recommend?
    • A. 

      HPE MSA 2040 in combination with VMware auto deploy

    • B. 

      HPE StoreVirtual VSA combination with HPE Virtual Connect

    • C. 

      HPE 3PAR in combination with HPE OneView for VMware vCenter

    • D. 

      HPE 3PAR in combination with HPE Storage Automation

  • 21. 
    Which discussion point describes a Tier I approach to datacenter redundancy levels?  
    • A. 

      Optimizing DIMM memory and RAID protected storage

    • B. 

      Composing the solution of basic hypervisor clustering technology

    • C. 

      Using a single path for power and cooling distribution without redundant components

    • D. 

      Implementing primarily a storage redundancy technique

  • 22. 
    A customer is working on a project to enable workplace productivity. The customer needs a solution that will allow employees to connect to their workplace environment by using a personal mobile phone, tablet, laptop, or desktop computer. Employees must be able to stop and resume work seamlessly while travelling between offices. Which purpose-built hardware can the customer use to help achieve this goal?
    • A. 

      HPE Moonshot to provide hosted physical desktop and application virtualization to mobile users

    • B. 

      HPE Apollo 2000 to provide VDI access to mobile users

    • C. 

      HPE Moonshot to provide VDI access to mobile users

    • D. 

      HPE Apollo 2000 to provide hosted physical desktop and application virtualization to mobile users

  • 23. 
    A customer has a large Oracle-based ERP solution that runs on HPUX and multiple rx2800 i2 servers. The customer plans to move to an open source solution to reduce operating expenses. The customer needs the ability to deliver incremental capacity and needs to avoid incremental Oracle licensing costs. Which HPE Server solution will help meet the customer's needs?  
    • A. 

      HPE Apollo 6000 System

    • B. 

      HPE Superdome X

    • C. 

      HPE BladeSystem c7000 with BL460GGen9 Servers

    • D. 

      HPE Apollo 4500 System

  • 24. 
    An architect is writing a response to a Request for Proposal (RFP). The customer has requested financial information on the monetary amount by which assets are valued in business records. Which value does the architect need to consider?
    • A. 

      Total cost of acquisition (TCA)

    • B. 

      Net investment value (NIV)

    • C. 

      Net book value (NBV)

    • D. 

      Fair market value (FMV)

  • 25. 
    A customer is planning a multi-threaded HPC solution that would benefit from threads running in parallel. The architect selects the HPE Apollo 6000 and needs to choose between the HPE XL230a and the XL250a compute tray. What is one reason for choosing the XL250a tray?
    • A. 

      The HPE XL250a server supports DDR4 HPE Smart Memory.

    • B. 

      The HPE XL250a server supports dual accelerators.

    • C. 

      The HPE XL250a server provides full length PCIe expansion slots.

    • D. 

      The HPE XL250a server delivers dual processor performance.

Back to Top Back to top