Hpe0-s52 ATP Server V4

57 Preguntas | Total Attempts: 189

SettingsSettingsSettings
Please wait...
Hpe0-s52 ATP Server V4

Practica para examen de certificacion HPE0-S52, ATP Servers Solution v4


Questions and Answers
  • 1. 
    A customer has the following requirements: 5TB of local to host a 3TB application ILO5 Service Port to download AHS logs & remote console You propose the following solution 3x –HPE Proliant DL380 Gen9 6x – HPE 1TB SATA 6G Midline 7.2 SFF (per server) What must be changed in your proposal to meet all of the customer requirements?
    • A. 

      HPE ILO Advanced License

    • B. 

      HPE Proliant DL380 Gen10

    • C. 

      HPE iLO Advanced Premium Security Edition

    • D. 

      HPE Smart Array SR Security license

  • 2. 
    A customer needs a tool that Will allow them to mount virtual media to multiple HPE Proliant BL systems at the same time. What should you recommend to this customer?
    • A. 

      Agentless Management Service

    • B. 

      HPE OneVIew

    • C. 

      HPE Composer

    • D. 

      HPE Onboard administrator

  • 3. 
    During HPE BladeSystem implementation, you need to update firmware of the Virtual Connect modules Installed in this enclosure. This enclosure is not managed by HPE OneView Which Tool can be used to update firmware in VC modules?
    • A. 

      Onboard Administration

    • B. 

      Insight Display

    • C. 

      Virtual Connect Support Utility

    • D. 

      Virtual Connect Manager

  • 4. 
    A customer needs a process by which they can communicate with their equipment using: Based on an open industry-standard Provides a programmable interfaces that uses a lightweight data model Which metodology should the customer use?
    • A. 

      JSON

    • B. 

      RESTful API

    • C. 

      XML

    • D. 

      SOAP

  • 5. 
    You are troubleshooting an issue with a Proliant Service and need to revert to the initial configuration. During the process, you forget some of the previous configuration changes made. Which HPE tool can you use to recall all the configuration changes mode?
    • A. 

      IML Log

    • B. 

      ILO Syslog

    • C. 

      Active Health System Viewer

    • D. 

      OneView Event Viewer

  • 6. 
    Which key fifferentiator is new to the Gen10 Proliant servers?
    • A. 

      UEFI Bios

    • B. 

      HPE Flexible Network adapters

    • C. 

      HPE Smart memory

    • D. 

      Firmware recoverability

  • 7. 
    A customer is evaluating HPE Gen10 Proliant server options. Tey want to test the ability to erase all user data so that it is irrecoverable. Which license option Will they need?
    • A. 

      ILO Advanced Premium Security Edition

    • B. 

      ILO Advanced

    • C. 

      OneView Advanced

    • D. 

      OneView without IlLO

  • 8. 
    A customer is concerned about managing an HPE Synergy platform Which management component is required?
    • A. 

      Composer

    • B. 

      ILO Amplifier Pack

    • C. 

      Image Streamer

    • D. 

      Insight Control

  • 9. 
    You need to enable insight Remote for some HPE Proliant DL servers Which HPE tool can be used for this purpose?
    • A. 

      HPE Intelligent Provisioning

    • B. 

      HPE Onboard Administration

    • C. 

      ILO Amplifier

    • D. 

      Hpe Smart Update Manager

  • 10. 
    What is a function of a c7000 Onboard Administrator module?
    • A. 

      Deploy an operating system with intelligent provisioning

    • B. 

      Provides termal and power status for devices in the enclosure

    • C. 

      Runs a OneView virtual machine

    • D. 

      Perform Secure Erase of Blade disk drives in the enclosure

  • 11. 
    In HPE Storage Administrator, what does the Wear Gauge parameter describe?
    • A. 

      Remaining expected lifetime o fan SSD drive

    • B. 

      Maximun number os SSD drives that can be installed in a system

    • C. 

      Availability level (MTBF) for an SSD drive

    • D. 

      Performance metrics for SSD drive

  • 12. 
    • A. 

      Centralized firmware support

    • B. 

      Extended controller support

    • C. 

      Parallel read/write

    • D. 

      Lower latency

  • 13. 
    A customer has ten c7000 enclosures equipped with Gen8 servers and Virtual Connect FlexFabric modules. The servers are monitored by HPE Systems Insight Manager (SIM). The customer plans to add three additional enclosures with FlexFabric modules and Gen10 servers and standarize management using HPE OneView. How should they implement the new management sytem?
    • A. 

      Deploy HPE OneView, migrate existing enclosures to HPE OneView

    • B. 

      Add new enclosures to the HPE Systems Insight Manager, then migrate all enclosures to HPE OneView.

    • C. 

      Upgrade existing HPE System Insight Manager installation to the latest versión of the HPE OneView, and add new enclosures

    • D. 

      Configure a new domain group in Virtual Connect Enterprise Manager, import new enclosures to that group, and migrate all of them to the HPE OneView

  • 14. 
    A customer has a requirement change where prior to decommissioning a aserver they must perform a secure erase of the server. Which iLO license should you include in the new proposal for server hard ware going forward?
    • A. 

      HPE iLO Advanced

    • B. 

      HPE iLO Standard

    • C. 

      HPE iLO Essentials

    • D. 

      HPE ILO Advanced Premium Security Edition

  • 15. 
    Your customer is concerned about the possibility o fan attack via hard drive firmware exploits against their server infrastructure. Which new HPE Proliant Gen10 Techbology protest against these attacks?
    • A. 

      Secure Recovery

    • B. 

      Common Access Card (CAC) two-factor autehntication support

    • C. 

      Firmware runtime validation

    • D. 

      Commercial National Security Algorithms compliance

  • 16. 
    A customer needs the perform rapid checkpoint and restores of the data on their data analytics database. When customer should ypu ask to determine whether to deploy HPE Scalable Persistent Memory or HPE NVDIMMs to meet their requirements? (Select two)
    • A. 

      What is your system disk architecture?

    • B. 

      What leve lof fault tolerance is necessary?

    • C. 

      Are all the existing servers Gen10?

    • D. 

      Who is your current vendor for servers?

    • E. 

      Which Operating System Will be installed?

  • 17. 
    What are benefits of HPE Scalable Persistent Memory? (Select two)
    • A. 

      Utilizes DRAM for application performance with flash backup

    • B. 

      Increases memory bandwidth

    • C. 

      Increases disk cache memory write performance

    • D. 

      Reduces databases bottlenecks

    • E. 

      Optimizes disk drives performance

  • 18. 
    Which technology provides the lowest latency and high bandwidth within high-performance enviroment?
    • A. 

      Ethernet

    • B. 

      Fiber Channel

    • C. 

      ISCSI

    • D. 

      Infiniband

  • 19. 
    After the ILO has been discovered, an administrator is unable to perform group firmware updates to their DL380 Gen10 server. What sould the administrator check to diagnose the problema? (Select Two)
    • A. 

      Wheter the information has been configure don the ILO

    • B. 

      Whether single sign-on is enabled on the ILO

    • C. 

      Whether the ILO has been added to the DEFAULT users group

    • D. 

      Whether the ILO has the Advanced license applied

  • 20. 
    A customer has a c7000 enclosure running a mix of G7, Gen8, and Gen9 servers. They are decommissioning their G7 servers and plan to replace them with Gen10 servers. Which Gen10 server is the most appropiate replacement?
    • A. 

      SY480 Gen10

    • B. 

      BL460 Gen10

    • C. 

      DL380 Gen10

    • D. 

      DL360 Gen10

  • 21. 
    A customer needs to purchase a new Synergy frame now add two more frames and quarter to expand the first Logical Enclosure Which feature allows the customer to add frames without downtime?
    • A. 

      HE Dynamic Bandwidth Optimizer

    • B. 

      Frictionless scaling

    • C. 

      HPE OneView Advanced License

    • D. 

      Intelligent system tuning

  • 22. 
    An administrator in unable to share the iLO graphic console on a DL380 Gen10 server with another administrator. What should the administrator check first to diagnose the problema?
    • A. 

      Whether the shared remote console for this server is enabled on the OA level

    • B. 

      Whether the iLO has the Advanded license applied

    • C. 

      Whether the video cable is property connected to the iLO port

    • D. 

      Whether single sign-on is enabled on the iLO

  • 23. 
    A customer needs a video archive repository initially starting al 30TB internal storage. The repository is expected to grow al 20% annually and should have a lifespan of 3 years. Which HPE Proliant server solution meets the customer’s requirements?
    • A. 

      HPE Proliant DL80 Gen10 with LFF SAS drives

    • B. 

      HPE Proliant DL380 Gen10 with LFF SAS drives

    • C. 

      HPE Proliant ML110 with SFF SAS drives

    • D. 

      HPE Proliant DL380 Gen9 with SFF SAS drives

  • 24. 
    A cost-conscious health care customer is considering Gen 10 server solutions to adhere to security mandates. Which security features should the customer test with an ILO5 standard license? (Select Two)
    • A. 

      Runtime Firmware Validation

    • B. 

      Manual Secure Recovery

    • C. 

      Automatic Secure Recovery

    • D. 

      Secure Erase of User Data

    • E. 

      Silicon Root of trust

  • 25. 
    A customer has the following requirements: Server remote control via virtual KVM 5TB of local storage to host a 3TB application Maximize read/write performance for the customer application You propose the following solution: 3x – HPE Proliant DL380 Gen10 6x – HPE 1TB SATA 6G Midline 7.2k SFF (per server) 1x – HPE 400GB SATA 6G Write intensive SFF (per server) What is the mínimum HPE software license required to meet all of the customer requirements?
    • A. 

      HPE Smart Array Advanced Pack

    • B. 

      HPE iLO Advanced license

    • C. 

      HPE iLO Standard license

    • D. 

      HPE iLO Advanced Premium Security edition