Ras Quiz 2 Team 2

20 Questions

SettingsSettingsSettings
Please wait...
Ras Quiz 2 Team 2

Questions and Answers
  • 1. 
    A program written with the IDE for Arduino is called _________
    • A. 

       IDE source

    • B. 

      Sketch

    • C. 

      Cryptography

    • D. 

      Source code

  • 2. 
    PWM pins are
    • A. 

      Analog in pins

    • B. 

      Analog out pins

    • C. 

      Both Analog out and digital pins

    • D. 

      Both Analog in and digital pins

  • 3. 
    What is the correct syntax of Map function
    • A. 

      Map(value, from High, from Low, to High, to Low)

    • B. 

      Map(value, to Low, to High, from Low, from High)

    • C. 

      Map(value, from Low, to Low, from High, to High)

    • D. 

      Map(value, from Low, from High, to Low, to High)

  • 4. 
    The delay we provide in programming is taken in
    • A. 

      Microseconds

    • B. 

      Milliseconds

    • C. 

      Seconds

    • D. 

      Minutes

  • 5. 
    What is an IDE?
    • A. 

      Integrated display environment

    • B. 

      Integrated development environment

    • C. 

      Integrated display edge

    • D. 

      Integrated development edge

  • 6. 
    The signal from the Potentiometer is considered as ____________
    • A. 

      Input

    • B. 

      Output

  • 7. 
    Which of the following is correct? (Mp-Microprocessor and Mc-Microcontroller)
    • A. 

      Arduino is Mp and RaspberryPi is Mc

    • B. 

      Arduino is Mc and RaspberryPi is Mc

    • C. 

      Arduino is Mp and RaspberryPi is Mp

    • D. 

      Arduino is Mc and RaspberryPi is Mp

  • 8. 
    Which of the following is the correct syntax for declaring  pin 13 as Input Pin?
    • A. 

      PinMode(13,INPUT)

    • B. 

      PinMode(13,INPUT)

    • C. 

      Pinmode(13,INPUT)

    • D. 

      PinMode(13,Input)

  • 9. 
    What is the name of the processor present on Arduino UNO board?
    • A. 

      ATmega126P

    • B. 

      ATmega328P

    • C. 

      ATmega128P

    • D. 

      Atmega256P

  • 10. 
    What is the angle rotation capability of a Micro Servo Motor?
    • A. 

      0 to 360

    • B. 

      -180 to +180

    • C. 

      -90 to +270

    • D. 

      0 to 180

  • 11. 
    I went to buy a PC; the shopkeeper suggests me a Lenovo brand and mentions that it can to 2,300.000,000 tasks in one second, the tasks can Arduino complete in one second is[Blank]
  • 12. 
    A self-driving car falls under which generation of Robots?
    • A. 

      First

    • B. 

      Second

    • C. 

      Third

    • D. 

      Fourth

  • 13. 
    What is the output the value of voltage after this line is executed? voltage=map(255,0,1023,0,255);
    • A. 

      64

    • B. 

      1023

    • C. 

      60

    • D. 

      None

  • 14. 
    Which circles among the following depicts communication chip?  
    • A. 

      White

    • B. 

      Yellow

    • C. 

      Orange

    • D. 

      None

  • 15. 
    What is the binary equivalent if 51 ?
    • A. 

      110010

    • B. 

      110011

    • C. 

      110100

    • D. 

      110101

  • 16. 
    The use of operator in Arduino is to compile mathematical or logical functions 
    • A. 

      True

    • B. 

      False

  • 17. 
    Which command is used to use a servo motor  named  “Delta”  at the 9th pin ?
    • A. 

       Servo.attach(9)

    • B. 

      Servo.define(9)

    • C. 

      Delta.attach(9)

    • D. 

      Delta.define(9)

  • 18. 
    What is the color code for a 4.7 kΩ resistor with 5% tolerance?
    • A. 

      Green-violet-red-gold  

    • B. 

      Yellow-blue-red-gold

    • C. 

      Yellow-violet-red-gold

    • D. 

      Yellow-violet-orange-gold

  • 19. 
    The above shown is a picture of a potentiometer with its pins labeled as 1,2,3. Which of these pins can be used as a GND pin?
    • A. 

      Pin 1

    • B. 

      Pin 2

    • C. 

      Pin 3

    • D. 

      Both pin 1 and pin 3

  • 20. 
    The figure shown above is a servo motor, it has three pins differentiated with colours as orange, red, brown respectively. Which of the following representation is correct?
    • A. 

      Orange – GND Red – Vcc Brown – PWM Input

    • B. 

      Orange – PWM Input Red – Vcc Brown – GND

    • C. 

      Orange – Vcc Red – PWM Input Brown – GND

    • D. 

       orange – PWM Input  Red – GND  Brown – Vcc

Back to Top Back to top