Velocita Racing Rulebook Quiz 4

20 Questions | Total Attempts: 32

SettingsSettingsSettings
Please wait...
Velocita Racing Rulebook Quiz 4


Questions and Answers
  • 1. 
    Which of the following statement(s) is/are true?
    • A. 

      The decision of the officials regarding any protest will be in a electronic form and is final. 

    • B. 

      In order to have a protest considered, a team must post a twenty (20) point protest bond which will be forfeited if their protest is rejected. 

    • C. 

      Teams may protest rule interpretations or actions that have not caused them any substantive damage. 

    • D. 

      None of the above

  • 2. 
    If the SES is not submitted within the competition deadline, what is the maximum points a team can lose?
    • A. 

      50

    • B. 

      60

    • C. 

      70

    • D. 

      80

  • 3. 
    The team will be de-registered from the competition if it has not uploaded a corrected version of Photographic Submission after _______ following the request. 
    • A. 

      168 hours

    • B. 

      336 hours

    • C. 

      24 hours

    • D. 

      84 hours

  • 4. 
    Teams that submit documents which miss the initial deadlines of group B by more than 168 hours (7 days) will be de-registered from the competition.
    • A. 

      True

    • B. 

      False

  • 5. 
    The steering rack attachment to the chassis can be a 
    • A. 

      Welded joint

    • B. 

      Bolted joint

    • C. 

      Adhesive joint

    • D. 

      None of the above

  • 6. 
    If the chassis is made of unalloyed carbon steel, the steel tubes must have a maximum carbon content of
    • A. 

      0.1%

    • B. 

      0.2%

    • C. 

      0.3%

    • D. 

      0.4%

  • 7. 
    The support member to a bent tube of the primary structure must have its attachment point at the position along the bend tube where it deviates farthest from a straight line connecting both ends. 
    • A. 

      True

    • B. 

      False

  • 8. 
    Any tubing with a wall thickness less than 1.2 mm or a minimum area moment of inertia less than _____ mm^4 is considered non-structural.
    • A. 

      11320

    • B. 

      8509

    • C. 

      6695

    • D. 

      None of the above

  • 9. 
    The SES of a monocoque must include
    • A. 

      Shear test data

    • B. 

      Method of lay up

    • C. 

      Type of resin

    • D. 

      All of the above

  • 10. 
    The sample for testing the composite fiber laminate must be atleast
    • A. 

      50mm x 50mm

    • B. 

      100mm x 100mm

    • C. 

      150mm x 150mm

    • D. 

      200mm x 200mm

  • 11. 
    Select the ones which are not true.
    • A. 

      If the front bulkhead support is part of a composite structure, it must have equivalent EI to the sum of the EI of the five baseline steel tubes that it replaces. 

    • B. 

      In a double-lug joint each lug must be at least 4.5 mm thick and the pin or bolt must be 8 mm metric grade 8.8 minimum. 

    • C. 

      When using bolted joints within the primary structure, no crushing of the laminate core material is permitted. 

    • D. 

      If the side impact structure is part of a composite structure, the perimeter shear strength must be  7.5 kN. 

  • 12. 
    The seat shoulder padding cannot be removed while inspecting the fit using the cockpit opening template.
    • A. 

      True

    • B. 

      False

  • 13. 
    Which of the following is true?
    • A. 

      Titanium fabricated brake pedals are allowed.

    • B. 

      Fiber braided rubber brake hoses are allowed.

    • C. 

      All moving  suspension and steering components and other sharp edges inside the cockpit between the front hoop and a vertical plane 50 mm rearward of the pedals, must be shielded with solid material. 

    • D. 

      None of the above

  • 14. 
    Which of the following is not true?
    • A. 

      Scatter shields can be attached to the chassis mounts using 12.9 grade M8 bolts.

    • B. 

      Scatter shields can be constructed by a non perforated 2mm steel sheet.

    • C. 

      LED lights may be used as brake lights, but they may not be more than 20mm apart.

    • D. 

      None of the above

  • 15. 
    All aerodynamic devices _________ of a vertical plane through the rearmost portion of the front face of the driver head restraint support, excluding any padding, set to its most rearward position must be ___________.
    • A. 

      Forward, lower than 1200mm from the ground

    • B. 

      Rearward, lower than 1200mm from the ground

    • C. 

      Rearward, higher than 1200mm from the ground

    • D. 

      Rearward, lower than 1200mm from the lowest point of the chassis

  • 16. 
    The indication(s) that the BSPD is fully functional and in accordance with the rulebook is/are 
    • A. 

      Disconnect the brake system encoder from BSPD while the throttle is open.

    • B. 

      Power to ignition & fuel pump must shut down.

    • C. 

      May reset itself if the opening condition is no longer present for more than 10s.

    • D. 

      All of the above

  • 17. 
    Which of the following is/are true?
    • A. 

      Wheels used for the competiton must be atleast 254mm in diameter.

    • B. 

      TPS is acceptable as a return spring.

    • C. 

      If the battery is placed inside the cockpit, it must be protected IPX7 rated and acid resistant casing

    • D. 

      None of the above

  • 18. 
    Holes for inspecting the size of the tubes of front and main roll hoops in non critical areas must be of _____ diameter.
    • A. 

      2.5mm

    • B. 

      3.5mm

    • C. 

      4.5mm

    • D. 

      5mm

  • 19. 
    The brake lines assembly, the accelerator pedal, clutch pedal and the brake pedal, was missed out from the CBOM. How many penalty points would the team suffer?
    • A. 

      12

    • B. 

      14

    • C. 

      18

    • D. 

      20

  • 20. 
    The correct order of events is
    • A. 

      TI > Tilt test > Brake test > Noise test

    • B. 

      TI > Tilt test > Noise test > Brake test

    • C. 

      TI > Noise test > Tilt test > Brake test

    • D. 

      None of the above

Back to Top Back to top