Melrose Assembly Certification

18 Questions

Settings
Certification Quizzes & Trivia

Questions and Answers
  • 1. 
    A pinched or punctured wire will likely render the product inoperable.
    • A. 

      True

    • B. 

      False

  • 2. 
    It is not important to use the grease provided by the vendor when assembling the product.
    • A. 

      True

    • B. 

      False

  • 3. 
    When using a sharp object to open the carton, it is best to cut along the corners of the carton to avoid damaging internal contents.
    • A. 

      True

    • B. 

      False

  • 4. 
    Often in the process of manufacturing, paint can accumulate in the threads where bolts are inserted. This does not affect the ability of the bolt to be inserted smoothly.
    • A. 

      True

    • B. 

      False

  • 5. 
    Forcing a connection may cause wires to bend
    • A. 

      True

    • B. 

      False

  • 6. 
    It is important to follow the vendor's guidlines for product assembly
    • A. 

      True

    • B. 

      False

  • 7. 
    Models with a PC type of display do not require a boot period.
    • A. 

      True

    • B. 

      False

  • 8. 
    Some models have a Velcro strap installed to prevent accidental unfolding during shipping. If improperly removed, the treadmill could spring open unexpectedly and cause injury.
    • A. 

      True

    • B. 

      False

  • 9. 
    Laying out parts, screws, tools. etc. in an organized way is not important to the assembly of an elliptical.
    • A. 

      True

    • B. 

      False

  • 10. 
    Screws should not be tightened until assembly is complete
    • A. 

      True

    • B. 

      False

  • 11. 
    It is important to keep tension on wiring (hold up) when assembling neck to prevent pinching/cutting.
    • A. 

      True

    • B. 

      False

  • 12. 
    Hammering on the axle will not break the bushings.
    • A. 

      True

    • B. 

      False

  • 13. 
    Tightening the upright and the handrail bolts can be done at any stage of the assembly process.
    • A. 

      True

    • B. 

      False

  • 14. 
    A screw going in at an angle can be reversed if lubricated first.
    • A. 

      True

    • B. 

      False

  • 15. 
    Rubber Mallets can be used......
    • A. 

      Never

    • B. 

      When suggested in Owner's Manuals or Assembly Guides

    • C. 

      Instead of using grease

    • D. 

      TO lightly tap axles into place

    • E. 

      B & D

  • 16. 
    If grease is not used to lube the axles and bushings, teams will strugle with assembly
    • A. 

      True

    • B. 

      False

  • 17. 
    If a drill is used during assembly, it must be a regular or low voltage (12 volt) impact drill.
    • A. 

      True

    • B. 

      False

  • 18. 
    Using correct sockets and SAE/Metric allen bits can prevent stripping of screws
    • A. 

      True

    • B. 

      False