Hardware And Software Integration! Trivia Questions Quiz

15 Questions

Settings
Please wait...
Hardware And Software Integration! Trivia Questions Quiz

Hardware and Software Integration is an important skill for every programmer or software developer to get. The trivia Questions Quiz below is exactly what you need so that you can review what you know. Give it a try and be sure to be on the lookout for other questions just like it. All the best and feel free to take it more than once.


Questions and Answers
  • 1. 
    The image formation process consist of these 6 step..........
    • A. 

      Drum Cleaning, Image writing, Drum Conditioning, Fusingm, Transfer image, image developing

    • B. 

      Drum cleaning, image developing, drum conditioning, image transfer, fusing

    • C. 

      Drum cleaning, Drum Conditioning, image writing, image developing, image transfer, image fusing

    • D. 

      Drum cleaning, Drum Conditioning, image writing, image developing, image fusing,image transfer

    • E. 

      Drum cleaning, Drum Conditioning, image developing,image writing, image fusing,image transfer

  • 2. 
    On this stage, any residual particles are physically removed from the drum's surface...
    • A. 

      Conditioning

    • B. 

      Cleaning

    • C. 

      Writing

    • D. 

      Image transfer

    • E. 

      Fusing

  • 3. 
    The  parts highlighted belongs to the following stage..:
    • A. 

      Cleaning

    • B. 

      Conditioning

    • C. 

      Fusing

    • D. 

      Transfer

    • E. 

      Writing

  • 4. 
    The paper path sequence consists of the following steps:
    • A. 

      Pick up stage, registration stage, transfer stage, fusing stage and exit

    • B. 

      Pick up stage, transfer stage ,fusing stage, registration stage and exit

    • C. 

      Pick up stage, transfer, registration stage, fusing stage, exit

    • D. 

      Pick up stage, registration stage, fusing stage, transfer stage, and exit

    • E. 

      Pick up stage, transfer stage, registration stage,fusing stage and exit

  • 5. 
    They are typically 2 sensors in a fusing assembly; one where the paper enters the fusing assembly and one where the paper leaves the assembly..... The previous statement is mention the following stage:
    • A. 

      Transfer stage

    • B. 

      Pickup stage

    • C. 

      Fusing stage

    • D. 

      Exiting stage

    • E. 

      Registration stage

  • 6. 
    The front side of the paper is actually printed during the first pass, and the backside of the paper is printed during the second pass. This is so multiple page documents will be stacked in the proper order when removed the output bin.
    • A. 

      False

    • B. 

      True

  • 7. 
    Paper jams occur when the printer detects paper that should not be present, or when the paper arrives too early or too late at any point on the paper path during the printing stage.
    • A. 

      False

    • B. 

      True

  • 8. 
    Regarding timing sequence, which of the following answers is correct?
    • A. 

      Warm up stage- Standby stage- Last rotation stage - Print stage- initial stage

    • B. 

      Warm up stage- Standby stage, Inintial stage, Print stage- Last rotation stage

    • C. 

      Warm up stage-Last rotation stage -Print stage- Last rotation stage- Standby stage

    • D. 

      Warm up stage- Last rotation stage -Print stage- Last rotation stage

    • E. 

      Warm up stage-Last rotation stage -Print stage- Standby stage-Last rotation stage- Standby stage

  • 9. 
    On this stage, all the components of the printer are operating. All the components of the image process are energized to take raster and convert it into an image on the paper. These components included: 1- The formatter 2- The engine Controller assembly 3- The laser scanner assembly 4- The charging roller 5- The OPC 6- The developing roller 7- The heating element of the fusing assembly.
    • A. 

      Warm up stage

    • B. 

      Standby stage

    • C. 

      Printing stagee

    • D. 

      Exit stage

    • E. 

      Initial stage

  • 10. 
    The DC controller assembly performs the following functions: 1- Controls the power save mode 2- Receives and process print data from the various printer interfaces 3- Monitors input from the control panel and relays the printer status information 4- Develops and coordinates data placement and timing with the print engine 5-Stores font information 6- Manages all  I/O communication
    • A. 

      False

    • B. 

      True

  • 11. 
    Another important role of the________________ is serving as a translator. The___________ takes the image information signal sent from the PC and "translates" the PC language.  
  • 12. 
    The DC controller is a router and handler of DC electrical power. It performs 2 primary functions: 1- Routes electrical signal 2- Supplies DC voltage to the HVPS.
    • A. 

      False

    • B. 

      True

  • 13. 
    The DC controller is NOT responsible for directing both single- and double-sided printing. The controller processes the appropriate print signal triggers the appropriate sensors and rollers.
    • A. 

      False

    • B. 

      True

  • 14. 
    Based on the picture, please choose the option that matches the numbers.  
    • A. 

      1- Formatter, 2-Motors , 3- Fans, 4- Photosensor and others, 5- Fuser, 6- LVPS, 7- HVPS, 8- Transfer roller

    • B. 

      1- Formatter, 2-Motors , 3- Fans, 4-Transfer roller , 5- Fuser, 6- LVPS, 7- HVPS, 8-Photosensor and others

    • C. 

      1-Transfer roller, 2-Motors , 3- Fans, 4-Formatter , 5- Fuser, 6- LVPS, 7- HVPS, 8-Photosensor and others

    • D. 

      1-Transfer roller, 2-Motors , 3-Fuser, 4-Formatter , 5-Fans , 6- LVPS, 7- HVPS, 8-Photosensor and others

    • E. 

      1- Formatter, 2- Fans, 3- Motors, 4- Photosensor and others, 5- Fuser, 6- LVPS, 7- HVPS, 8- Transfer roller

  • 15. 
    • A. 

      Checking the OPC

    • B. 

      Checking the internal pages

    • C. 

      Control panel will show the error message

    • D. 

      10.10.00 supply memory error

    • E. 

      Because of the print Quality issue that the customer is having.......