Huber- Modern Recording Techniques Chpt 11
This will calculate your understanding of chapter 11 in the Huber book, Modern Recording Techniques. Please pick the best answer.
- 1.An audio production console is also called
- A.
Board
- B.
Desk
- C.
Mixer
- D.
All of the above
- 2.A recorded blend of music is called a
- A.
Monitor
- B.
EQ
- C.
Buss
- D.
Mix
- 3.What do we call instruments that are recorded to establish the foundation so that other instruments can be recorded afterwords?
- A.
Basic
- B.
Rhythm
- C.
Bed tracks
- D.
All of the above
- 4.Rhythm or basic tracks consists of ?
- A.
Drums and Bass
- B.
Keyboards
- C.
Rhythm
- D.
Horns
- 5.Mutlitrack recording generally involves which of the following steps in chronological order?
- A.
Foldback, summing, aux sends
- B.
Mixdown, overdubbing, foldback
- C.
Overdubbing, mixdown, recording
- D.
Recording, overdubbing and mixdown
- 6.____________ is assigning each signal's input strip to the same console output.
- A.
Mixing
- B.
Grouping
- C.
Insert
- D.
Panning
- 7.In order to achieve the best signal-to-noise ratio a track should be
- A.
Recorded at the highest level with out distortion.
- B.
Summed together.
- C.
Set to direct insertion point.
- D.
Recorded on analog tape.
- 8.Digital recording allows for increased
- A.
Overdubbing.
- B.
Headroom.
- C.
Cue mix.
- D.
Panning.
- 9.An audio engineer should
- A.
Use the "fix it in the mix approach".
- B.
Help capture the project's sound to " tape" or disk.
- C.
Record guitar.
- D.
Carry a soldering iron
- 10.Rhythm tracks are usually
- A.
The keyboards.
- B.
Recorded last.
- C.
Part of the DAW console
- D.
The driving backbone of a song.
- 11.Monitoring needs to occur
- A.
In the control room and for the artist.
- B.
Only in the control room.
- C.
Only for the artist.
- D.
Only one way.
- 12.Aux sends are used
- A.
As another way to get sound out of the mixing board.
- B.
For channel input.
- C.
For parametric EQ
- D.
Phase reversal.
- 13.Listening to previously recorded tracks through headphones and playing along while recording is known as__________.
- A.
Attenuation
- B.
Analog
- C.
Grouping
- D.
Overdubbing.
- 14.In the recording studio mixdown occurs
- A.
First.
- B.
Last.
- C.
During the recording process.
- D.
Anytime.
- 15.Which of the following adjustments are made to achieve a final mix?
- A.
Level
- B.
Panning
- C.
Equalization and effects
- D.
All of the above
- 16.Another term beside "final mix" when used to when everything is done with recording and mixing.
- A.
Bounce
- B.
overdubbing
- C.
Subbing
- D.
2 track
- 17.The path of the audio signal is called?
- A.
Signal flow
- B.
Signal path
- C.
Signal chain
- D.
All of the above
- 18.A vertical series of controls that are associated with a specific channel is called
- A.
Aux sends
- B.
Channel strip
- C.
Console
- D.
Metering
- 19.I/O stands for
- A.
Input/Output
- B.
Insert/Output
- C.
Insert/Open
- D.
Input/Open
- 20.Pick the device that must be use to make a microphone work.
- A.
Automation
- B.
EQ
- C.
Cable
- D.
Preamp
- 21.The first place the signal goes when a microphone is plugged into a mixer.
- A.
Fader
- B.
Preamp
- C.
Bus
- D.
Aux
- 22.Mic trims are also called
- A.
Level
- B.
Half normaled
- C.
EQ
- D.
Gain
- 23.Define attenuation.
- A.
To attenuate
- B.
Addition of signal
- C.
Convert to digital
- D.
Reduction of signal
- 24.An "pad" is used for
- A.
Covering
- B.
Softness
- C.
Touch screen
- D.
Attenuation
- 25.Aux sends are used to route signal flow to the main output.
- A.
True
- B.
False
Questions: 9 | Attempts: 184584 | Last updated: Mar 21, 2022
-
Sample QuestionWho wrote the Coming Apart: The State of White America, 1960-2010?
Questions: 15 | Attempts: 184745 | Last updated: Mar 22, 2022
-
Sample QuestionWhy did Lencho become angry when he counted the money?
Questions: 10 | Attempts: 167892 | Last updated: Mar 28, 2022
-
Sample QuestionWhat kind of movies would you like to watch?
Back to top