Hand Tools
This quiz will test your basic knowledge on the hand tools found in the computer engineering lab.
- 1.
What is this tool?
Correct Answer
side cutting pliers, diagonal cutting pliers, side cuttersExplanation
Side cutters are used to cut thin electrical wire or cables.Rate this question:
- 2.
What is this tool?
Correct Answer
Claw, Claw Hammer - 3.
What is this tool?
Correct Answer
Wire Stripper - 4.
What is this tool?
Correct Answer
ruler, 30cm ruler - 5.
What is this tool?
Correct Answer
nut driver - 6.
What is this tool?
Correct Answer
crescent wrench, adjustable wrench, shifter - 7.
What is this tool?
Correct Answer
tape measure, measuring tape - 8.
What is this tool?
Correct Answer
ring spanner , open ended spanner, spanner - 9.
What is this tool?
Correct Answer
hand file, file, rasp - 10.
What is this tool?
Correct Answer
pliers - 11.
What is this tool?
Correct Answer
phillips screwdriver, philips, phillipshead, phillips head screwdriver - 12.
What is this tool?
Correct Answer
slot screwdriver, flat screwdriver, falthead, splade screwdriver - 13.
What is this tool?
Correct Answer
needle nose pliers - 14.
What is this tool?
Correct Answer
hack saw, hacksaw - 15.
What is this tool?
Correct Answer
Hex key drivers, Hex driver, allen keys - 16.
What is this tool?
Correct Answer
steak knife, serrated knife - 17.
Who is responsible for hand and power tool safety in your group?
- A.
Students
- B.
Teacher
- C.
The cleaners
- D.
Students and teachers
Correct Answer
A. Students -
- 18.
Which of the following basic safety rules should you follow when using hand and power tools?
- A.
Keep all tools in good condition with regular maintenance
- B.
Use the right tool for the job
- C.
Examine each tool for damage before use and do not use damaged tools
- D.
Operate tools according to the manufacturer's instructions
- E.
All the options listed
Correct Answer
E. All the options listed -
- 19.
Which of the following is NOT a safe practice when working with power tools?
- A.
Keeping hoses and cords away from oil, heat, and sharp edges
- B.
Yanking the hose or the cord to disconnect it from the receptacle
- C.
Securing work with a vice or clamps, keeping both hands free to use the tool
- D.
None of the above
Correct Answer
B. Yanking the hose or the cord to disconnect it from the receptacle -
- 20.
While tightening a nut with an adjustable wrench...
- A.
The wrench should be pulled toward you
- B.
The wrench should be pushed away from you
Correct Answer
B. The wrench should be pushed away from you -
- 21.
Work areas and floors should always be kept clean and dry to prevent accidents.
- A.
True
- B.
False
Correct Answer
A. True -
- 22.
Electric tools should not be used in damp or wet locations.
- A.
True
- B.
False
Correct Answer
A. True -
- 23.
Only power tools with a 3-wire cord with a ground are permitted by NGPS.
- A.
True
- B.
False
Correct Answer
A. True -
- 24.
A screwdriver can also be used as a chisel.
- A.
True
- B.
False
Correct Answer
B. False -
- 25.
Wire cutting pliers that have plastic-covered handles should not be used to cut low-voltage, live electric wire.
- A.
True
- B.
False
Correct Answer
A. True -
- 26.
Dull tools can be just as hazardous as sharp ones.
- A.
True
- B.
False
Correct Answer
A. True -
- 27.
The 60cm steel ruler, is a:
- A.
Marking tool
- B.
Measuring tool
- C.
Clamping tool
- D.
Finding tool
Correct Answer
B. Measuring tool -
- 28.
This tool is used to shape wood, metal or plastic:
- A.
Scribe
- B.
File
- C.
Cold chisel
- D.
Screwdriver
Correct Answer
B. File -
- 29.
The hand saw that makes a cut parallel with a piece of metal is:
- A.
Rip saw
- B.
Crosscut saw
- C.
Keyhole saw
- D.
Hacksaw
Correct Answer
D. Hacksaw -
- 30.
These pliers are best for cutting soft wire:
- A.
Wire strippers
- B.
Diagonal cutters
- C.
Long nose pliers
- D.
Locking pliers
Correct Answer
B. Diagonal cutters -
- 31.
When using a hacksaw, apply pressure on the forward stroke only.
- A.
True
- B.
False
Correct Answer
A. True -
- 32.
The _____ is probably the most commonly used and abused tool.
- A.
Screwdriver
- B.
Hammer
- C.
Chisel
- D.
Hatchet
Correct Answer
A. Screwdriver -
- 33.
What is the name of this tool and what is it used to measure
Correct Answer
multimeter used to measure current in a circuit
.jpg "What is this tool?")
.jpg "What is this tool?")
.jpg "What is this tool?")
.jpg "What is this tool?")
Quiz Review Timeline +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Mar 21, 2022Quiz Edited by
ProProfs Editorial Team -
Mar 07, 2018Quiz Created by
Raybellngps
- Binary Code Quizzes
- Computer Concept Quizzes
- Computer Essential Quizzes
- Computer Forensics Quizzes
- Computer Hardware Quizzes
- Computer Networking Quizzes
- Computer Parts Quizzes
- Computer Programming Quizzes
- Computer Science Quizzes
- Computer Security Quizzes
- Computer Shortcut Key Quizzes
- Computer Skills Quizzes
- Computer Virus Quizzes
- Cyber Security Quizzes
- Data Quizzes
- Data Security Quizzes
- Hacking Quizzes
- HCI Quizzes
- Internet Quizzes
- IT SecurITy Quizzes
- Malware Quizzes
- Microprocessor Quizzes
- Network Quizzes
- Operating System Quizzes
- Phishing Quizzes
- Programming Language Quizzes
- Server Quizzes
- Software Quizzes
Back to top