Fse Registration Quiz #7

10 Questions | Total Attempts: 45

SettingsSettingsSettings
Please wait...
Fse Registration Quiz #7

Questions and Answers
  • 1. 
    The driver can (re)activate the tractive system when ....
    • A. 

      ... a torque encoder implausibility occured

    • B. 

      ... a BSDP implausibility occured

    • C. 

      ... an IMD fault occured

    • D. 

      ... an AMS fault occured

  • 2. 
    Which value must the current limiting resistors for the each tractive system measurement point have, if the maximum tractive system voltage is 298.8VDC?
    • A. 

      10kΩ

    • B. 

      5kΩ

    • C. 

      15kΩ

    • D. 

      20kΩ

  • 3. 
    The rise time (from 10% to 90%) of the capacitor voltage of a given one stage low pass RC network is 5.00ms. What are possible values for R and C
    • A. 

      R = 1500Ω; C = 1517nF

    • B. 

      R = 2000Ω; C = 1637nF

    • C. 

      R = 2500Ω; C = 1210nF

    • D. 

      R = 3000Ω; C = 1531nF

  • 4. 
    Under which condition time spent off the track is not added to the final time in the endurance event?
    • A. 

      Track is changing from "dry" to "wet" and the team changes tires

    • B. 

      Track is changing from "wet" to "dry" and the team changes tires

    • C. 

      Driver sees the black flag and gets rebuked for an inappropiate driving style

    • D. 

      Tire changed due to puncture, caused by a vehicle failure

  • 5. 
    What are the requirements for the space for technical inspection stickers?
    • A. 

      A space 75 mm tall x 150 mm wide (3” tall x 6” wide) must be available.

    • B. 

      There are no specific requirements.

    • C. 

      A space 254 mm wide x 203 mm tall (10” wide x 8” tall) must be available.

    • D. 

      A space 203 mm wide x 150 mm high (8” wide x 6” tall) must be available.

  • 6. 
    Which penalty does a team get for one cone down or out at Skid-Pad?
    • A. 

      0.25 seconds added

    • B. 

      1 second added

    • C. 

      2 seconds added

    • D. 

      None

    • E. 

      DNF

  • 7. 
    What does the Business Plan Executive Summary strictly need to contain?
    • A. 

      Team name, car number, two technical highlights, car production cost

    • B. 

      Team name, car number, sales strategy, car production cost

    • C. 

      Car number, at least two pages, sales strategy, car production cost

    • D. 

      Team name, car number, marketing strategy, brief team description

  • 8. 
    Which use of tires is NOT allowed?
    • A. 

      Two dry tire sets from two different manufacturers.

    • B. 

      Two different manufacturers on one set of dry tires.

    • C. 

      Two different sizes on one set of dry tires.

    • D. 

      A set of dry tires and a set of wet tires from two different manufacturers.

  • 9. 
    A ball (mass m) is attached to a wall with a spring (spring constant c). A force F(t) is applied to the ball in the direction away from the spring. Calculate the transferfunction G(s) = X(s)/F(s), asuming x(t) is the lengthening of the spring an there is neither friction nor gravity to be considered.
    • A. 

      G(s) = 1/(m*s^2+c)

    • B. 

      G(s) = (m*s^2)/c

    • C. 

      G(s) = 1/(m*s-c*s^2)

    • D. 

      G(s) = 1/(m*s+c)

    • E. 

      G(s) = m*s+c

  • 10. 
    On the Tilt Table, a lateral acceleration of 1.732g is tested with 60 degrees inclination angle. At which angle do you test 2.0g?
    • A. 

      63,4°

    • B. 

      61,7°

    • C. 

      60,9°

    • D. 

      62,5°

    • E. 

      64,1°

    • F. 

      65.0°

Related Topics
Back to Top Back to top