ESD Digs Shop
Settings
AFQTP 3DXXX-202A ESD QuizSave your certificate at the end and send it to your ESD monitor.
- 1.Which of the following is the most common type of ESD Damage?
- A.
Rusting
- B.
Partial Degradation
- C.
Complete Degradation
- D.
Partial Destruction
- E.
Complete Destruction
- 2.Which environment is considered to be more susceptible to the building of static electricity?
- A.
Humid
- B.
Dry
- C.
Dark
- D.
Bright
- 3.Which environment is considered to be less susceptible to the building up of static electricity?
- A.
Humid
- B.
Dry
- C.
Dark
- D.
Bright
- 4.Which of the following can help control ESD failures? Check only the ones that apply.
- A.
Using an approved ESD control product
- B.
Work at certified ESD work stations
- C.
Know Techniques for ESD protection
- D.
Work only in dry environments
- E.
All the above
- 5.When considering ESD, which is the most important?
- A.
Protection of Equipment
- B.
Safety
- C.
Protection of ESD protective equipment
- D.
Protection of the facility
- 6.When in doubt, always assume the minimum ESD sensitivity is what?
- A.
Supersensitive
- B.
Sensitive
- C.
Super insensitive
- D.
Insensitive
- E.
Supersusceptible
- F.
Susceptible
- 7.How often should work surfaces, storage cabinets, shelves and flooring be tested?
- A.
Every day, before initial use
- B.
Weekly
- C.
Monthly
- D.
Quarterly
- E.
Biannually
- F.
Annually
- 8.How often should wrist straps be tested?
- A.
Every day, before initial use
- B.
Weekly
- C.
Monthly
- D.
Quarterly
- E.
Biannually
- F.
Annually
- 9.____ ____ may be necessary for proper conductivity between your skin and the wrist strap.
- A.
Hand Lotion
- B.
Hand Sanitizer
- C.
Hand Soap
- D.
Clean Hands
- 10.If an improperly packaged ESD item is suspected, contact your ____ ____.
- A.
ESD Monitor
- B.
Tools Monitor
- C.
Supply Monitor
- D.
Immediate Supervisor
- 11.
- The wrist strap tester provides a ___ or ___ indicator allowing the operator to test electrical continuity and resistance while wearing the wrist strap.
- A.
Strong or Weak
- B.
Pass or Fail
- C.
Blank or Filled
- D.
Conductive or Inductive
- 12.What is the most important item in the ESD certified work station? The _____________.
- A.
ESD Mat
- B.
ESD Packaging
- C.
Work Bench
- D.
Personal Wrist Strap
- 13.What are the two ESD sensitivity levels?
- A.
Sensitive and Super sensitive
- B.
Insensitive and Sensitive
- C.
Super sensitive and Insensitive
- D.
Hyper sensitive and Super sensitive
- 14.Which description of static electricity is best defined by AFQTP 3DXXX-202A.
- A.
Stored electrical charge at rest.
- B.
Electrical charge in motion.
- C.
Electrical power.
- D.
Rubbing your feet across the carpet.
Back to top