Element Eac For Technical

12 Questions | Total Attempts: 38

SettingsSettingsSettings
Please wait...
Element Quizzes & Trivia

This test will assess your knowledge of the Element Area Controller (EAC).


Questions and Answers
  • 1. 
    What is the port baud rate for the Element Area Controller (EAC)?
    • A. 

      230400

    • B. 

      9600

    • C. 

      2400

    • D. 

      4800

  • 2. 
    There is no need to restart the EAC after updating the firmware
    • A. 

      True

    • B. 

      False

  • 3. 
    Check all correct answer(s). How do you correctly set up Serial Port Configuration from the EAC Webpage?
    • A. 

      Enabled: No

    • B. 

      Port Baud Rate: 9600

    • C. 

      Bits/Char: 8 bits

    • D. 

      Parity Check: Odd

    • E. 

      Stop Bits: Two

  • 4. 
    Currently, you can use two serial ports on the same EAC simultaneously.
    • A. 

      True

    • B. 

      False

  • 5. 
    You can use the same device on two ports simultaneously on a single EAC.
    • A. 

      True

    • B. 

      False

  • 6. 
    The IP address must be DHCP if there are more than one EAC. 
    • A. 

      True

    • B. 

      False

  • 7. 
    Check all that apply. When updating the EAC firmware, you must do the following:
    • A. 

      Ensure the firmware upgrade is compatible with the Element build.

    • B. 

      Physically disconnect all devices in the facility.

    • C. 

      Save your EAC settings, serial port configuration, and password to Database files or files through the Element UI.

    • D. 

      Disconnect the EAC from the Element server

  • 8. 
    How many devices can one Element Area Controller support?
    • A. 

      44

    • B. 

      36

    • C. 

      32

    • D. 

      16

  • 9. 
    When the network is slow, the EAC buffers device system activity messages and transactional information until the network is able to deliver messages to Element Facility Management.
    • A. 

      True

    • B. 

      False

  • 10. 
    Element Area Controller (EAC) does not allow the following:
    • A. 

      Setting Passback for Central Credentials

    • B. 

      Resync IDs

  • 11. 
    The Element Area Controller (EAC) only communicates with lane devices via an RS-422 serial interface.
    • A. 

      True

    • B. 

      False

  • 12. 
    How many methods are available for updating the EAC firmware?
    • A. 

      1

    • B. 

      5

    • C. 

      4

    • D. 

      3