Delta 1000 Semi Bed Quiz Revised

13 Questions | Total Attempts: 38

SettingsSettingsSettings
Game Quizzes & Trivia

The Game changer Bed Revised December 20, 2011


Questions and Answers
  • 1. 
    When placing  the Hilo shaft  through the hanger bracket on the footspring during inital assembly the locking collar that comes preset from the factory must be
    • A. 

      On the same side as the transition box.

    • B. 

      On the opposite side of the transition box

    • C. 

      Off the hilo shaft

    • D. 

      None of the above

  • 2. 
    If you leave the warehouse with a Drive Bed Deck and  either 2 head boards or 2 foot boards or a mixture of parts from other bed companies will you  still be able to assemble a working bed?
    • A. 

      NO , you can use only Drive head & foot boards on a drive bed Deck

    • B. 

      NO, you can use only Drive or Invacare head & foot boards on a drive bed deck

    • C. 

      YES, you can now use any manufacturers head and foot boards on a drive bed deck

    • D. 

      NO, you can now use only Medline Head & foot boards on a Drive Bed deck

  • 3. 
    Since the Drive hilo shaft is universal and it has many holes in it how do you know which hole to use?
    • A. 

      Guess

    • B. 

      Measure 6 feet long

    • C. 

      Measure 80 " long

    • D. 

      Drive marks the shaft with either Semi or Full over the appropriate hole.

  • 4. 
    Drives Delta bed come standard with a telescoping Hilo shaft that never has to be removed after first assembly.
    • A. 

      True

    • B. 

      False

  • 5. 
    You connect the head spring to the foot spring by
    • A. 

      Glue

    • B. 

      Aligning bed springs in 90 degree angle and connecting c hooks the same way as all other home care beds

    • C. 

      Welds

  • 6. 
    Once the frame is together the next step is
    • A. 

      Extending the shaft and installing the motor

    • B. 

      Installing head board

    • C. 

      Installing foot board

    • D. 

      Installing wheels on head & foot board

  • 7. 
     One way You  can install the Motor on the Drive Delta bed is while the bed is still  up on its side, you remove the siding covers from the motor case , and  then align the inlets to the hooks on the actuator bars and giving the motor a firm push  until it clicks on to the hooks then replace the  covers by sliding them back on.
    • A. 

      True

    • B. 

      False

  • 8. 
    When the motor is installed while the bed frame is on its side,  the 2 octagon shaped motor housings  on it face which direction ?
    • A. 

      Towards the closest outer frame

    • B. 

      Down

    • C. 

      East

    • D. 

      West

  • 9. 
    The batter back up  can be located in either the hand control or the motor case, Which type battery does it use?
    • A. 

      Double A

    • B. 

      Triple A

    • C. 

      9 volt

    • D. 

      C cell

  • 10. 
    Once the Motor is on the bed , the next step is installing the head and foot boards, you install these
    • A. 

      Differently from all major manufacturers

    • B. 

      The same as all other major manufacturers

    • C. 

      With screws

    • D. 

      With clamps

  • 11. 
    Since the Hilo shaft is now attached to the frame of the bed it is easier to install on the headboards and foot boards because you dont have to stand at one side of the bed and fish it through, you just lift the spring sections and it is hanging in place .
    • A. 

      True

    • B. 

      False

  • 12. 
    The Drive Delta bed made it simple to correctly  place the spring loaded cross bars for  full side rails by
    • A. 

      Color coding the springs black

    • B. 

      Notching the bed frame

    • C. 

      Adding a label

    • D. 

      All of the above

  • 13. 
    The way to fix a Drive bed that is not rising evenly ,because it was put together with 2 head boards or 2 foot boards is to
    • A. 

      Take it apart like our competitors and bring in the correct parts

    • B. 

      Take the head and foot boards off and reverse them

    • C. 

      Simply move the hilo shaft from the head to foot board setting to the head to head or foot to foot setting on the transition box

    • D. 

      Crank the bed

Back to Top Back to top