Switch2 is in transparent mode.
Switch1 is in client mode.
Switch1 is using VTP version 1 and Switch2 is using VTP version 2.
Switch2 is in server mode.
Switch1 is in a different management domain.
Switch SW2 must be configured as a VTP client.
Both switches must be configured as VTP clients.
Both switches must be configured with the same VTP revision number.
The switches must be configured with the same VTP domain name.
If this switch is added to an established network, the other VTP-enabled switches in the same VTP domain will consider their own
VLAN information to be more recent than the VLAN information advertised by this switch.
This switch shows no configuration revision errors.
This switch has established two-way communication with the neighboring devices.
This switch is configured to advertise its VLAN configuration to other VTP-enabled switches in the same VTP domain.
Transparent mode switches can create VLAN management information.
Transparent mode switches can add VLANs of local significance only.
Transparent mode switches pass any VLAN management information that they receive to other switches.
Transparent mode switches can adopt VLAN management changes that are received from other switches.
Transparent mode switches originate updates about the status of their VLANS and inform other switches about that status.
Reset the revision number on Switch2 with either the delete VTP command or by changing the domain name and then changing it back.
Change Switch1 to transparent VTP mode to reclaim all VLANs in vlan.dat, and then change back to server mode.
Change Switch2 to client mode so the VLANs will automatically repopulate.
Re-enter all appropriate VLANs, except VLAN 1, manually on Switch1 so that they repropagate throughout the network.
A new host has been attached to a switch in the management domain.
A port on a switch in the management domain has changed to blocking mode.
A five-minute update timer has elapsed.
The advertisement revision number has reached n+1.
Can add VLANs of local significance only
Can only adopt VLAN management changes
Can create and adopt updated VLAN management information
Can only pass VLAN management information without adopting changes
Can add VLANs to domain
VTP is only compatible with the 802.1Q standard.
VTP adds to the complexity of managing a switched network.
A switch configured for VTP can belong to more than one VTP domain.
VTP dynamically communicates VLAN additions, deletions and modifications to all switches in the same VTP domain.
VTP advertisements are passed over access links to other switches.
All switches receive updates and synchronize VLAN information.
Only switch SW2 receives updates and synchronizes VLAN information.
SW3 and SW4 receive updates, but only switch SW4 synchronizes VLAN information.
Only switches SW3 and SW4 receive updates and synchronize VLAN information.
It verifies the configured VTP password.
It verifies the VTP domain is configured to use VTP version 2.
It verifies VTP advertisements are being exchanged.
It verifies the VTP domain name is V1.
VTP pruning automatically updates all switches within the VTP domain with VLAN information.
VTP pruning updates all switches within the VTP domain with information about pruning-eligible VLANs.
VTP pruning updates all switches within the VTP domain with information about pruning-ineligible VLANs.
VTP pruning prevents flooded traffic from crossing trunk links to switches that do not need to process the flood traffic.
VLANs cannot be created on transparent mode switches.
Server mode switches neither listen to nor forward VTP messages from transparent mode switches.
VLANs created on transparent mode switches are not included in VTP advertisements.
There are no ports assigned to the new VLAN on the other switches.
Transparent mode switches do not forward VTP advertisements.
It suspends forwarding until a subset advertisement update arrives.
It issues an advertisement request for new VLAN information.
It increments the revision number and forwards it to other switches.
It deletes the VLANs not included in the summary advertisement.
It issues summary advertisements to advise other switches of status changes.
The switch operates as a VTP client.
Switch operates in VTP transparent mode.
The switch operates as a VTP server and deletes the existing VLAN configuration in the domain.
The switch operates as a VTP server, but does not impact the existing VLAN configuration in the domain.
S2 loses all VLANs until the cable is reconnected.
S2 automatically transitions to VTP transparent mode.
S2 does not send a VTP request advertisement unless it is reloaded.
S2 automatically sends a VTP request advertisement to 172.17.99.11 when the cable is reconnected.
Switches must be connected via trunks.
The VTP domain name is case sensitive.
Transparent mode switches cannot be configured with new VLANs.
The VTP password is mandatory and case sensitive.
Switches that use VTP must have the same switch name.