AutoCAD 2010 Exam [white]

70 Questions

Settings
Please wait...
AutoCAD 2010 Exam [white]

AutoCAD is a computer-aided drafting software program used to create blueprints for buildings, bridges, and computer chips, among other things. It is used by a lot of professionals in different fields. Test how much you know about it before the final exam by taking the test below. All the best of luck!


Questions and Answers
  • 1. 
    L  enter 0,0 @1000<0 @1000<90 @1000<180 @1000<270 What will these commands produce?
    • A. 

      Multiple circles

    • B. 

      A meter by meter square

    • C. 

      Four points randomly placed on the page

  • 2. 
    What tool is used to put a radius on a existing intersection?
    • A. 

      Trim

    • B. 

      Extened

    • C. 

      Ortho

    • D. 

      Fillet

  • 3. 
    What tool is used to draw a line parallel to a existing line at a exact distance from it?
    • A. 

      Ray

    • B. 

      Ortho

    • C. 

      Offset

    • D. 

      Polyline

  • 4. 
    What type of line is drawn from one to infinity in one direction?
    • A. 

      Poly line

    • B. 

      Ray line

    • C. 

      Construction line

    • D. 

      Dashed Line

  • 5. 
    What is the shortcut key for ortho?
    • A. 

      F5

    • B. 

      Enter

    • C. 

      F10

    • D. 

      F8

    • E. 

      Escape

  • 6. 
    Does the template set up the machine or does it set up the drawing?
    • A. 

      Machine

    • B. 

      Drawing

  • 7. 
    A rectangle drawn with the rectangle tool  is four separate lines or four lines joined together?
    • A. 

      Four lines joined together

    • B. 

      Four seperate lines

  • 8. 
    What is a block in Autocad?
    • A. 

      A square drawn by four separate lines

    • B. 

      A rectangle drawn with the rectangle tool

    • C. 

      A drawing that can be reused in the current drawing or brought in from another drawing

  • 9. 
    What tool  is being pointed to in the image?
    • A. 

      Copy

    • B. 

      Scale

    • C. 

      Trim

    • D. 

      Offset

    • E. 

      Extened

  • 10. 
    To select the centre of a line what option must be selected?
    • A. 

      Ortho

    • B. 

      Dynamic input

    • C. 

      Object snap

  • 11. 
    To draw a horizontal line from right to left what direction would it be?
    • A. 

      90

    • B. 

      180

    • C. 

      0

    • D. 

      270

  • 12. 
    What tool  is being pointed to in the image?
    • A. 

      Break

    • B. 

      Mirror

    • C. 

      Offset

    • D. 

      Move

  • 13. 
    What tool  is being pointed to in the image?
    • A. 

      Copy

    • B. 

      Offset

    • C. 

      Erase

    • D. 

      Trim

    • E. 

      Scale

  • 14. 
     Autocad drawings have what extension?
    • A. 

      .dwt

    • B. 

      .dwg

    • C. 

      .doc

    • D. 

      .jpg

  • 15. 
    When selecting with the green marquee does the object need to be touched by the green area or be contained to be selected ?
    • A. 

      Contained

    • B. 

      Touching

  • 16. 
    To draw a line what information must be known? Multiple answers are allowed.
    • A. 

      Starting point

    • B. 

      Height

    • C. 

      Colour

    • D. 

      Length

    • E. 

      Direction

  • 17. 
    To plot a drawing is to do what?
    • A. 

      Add a new layer

    • B. 

      Print it

    • C. 

      Add some key points

  • 18. 
    The multileaders 4,8,9 represent:
    • A. 

      Aligned Multileaders

    • B. 

      Vertical Multileaders

    • C. 

      Collected Multileaders

    • D. 

      Horizontal Multileaders

  • 19. 
    If you modify a dimension style, all dimensions using that style in the drawing update automatically.
    • A. 

      True

    • B. 

      False

  • 20. 
    What is the command used to draw the above dimension line?
    • A. 

      Dimjogged

    • B. 

      Dimjogline

    • C. 

      Joggeddim

    • D. 

      Joggedline

  • 21. 
    With the Multiline Text editor, you can do all of the following, except:
    • A. 

      Insert numbered and bulleted lists

    • B. 

      Insert specific drafting and engineering symbols

    • C. 

      Insert pictures

    • D. 

      Create Fields such as date, time and author.

  • 22. 
    If you copy and paste text from another drawing or insert a block into a drawing that has the same Text Style name with different properties, the text properties of the host drawing will take precedence.
    • A. 

      True

    • B. 

      False

  • 23. 
    What happens when you set VPROTATEASSOC System Variable to 0
    • A. 

      When a viewport is rotated, the view inside is not rotated.

    • B. 

      When a viewport is rotated, the view inside is rotated to match the rotation of the viewport.

  • 24. 
    The following are some of the properties and settings that you can save in a layout, except
    • A. 

      Plot scale

    • B. 

      Paper size

    • C. 

      Line weight

    • D. 

      Drawing orientation

  • 25. 
    You can set viewport scale factor by
    • A. 

      Typing vscale

    • B. 

      Typing vpscale

    • C. 

      Typing viewportscale

    • D. 

      None

  • 26. 
    Which of the following can be joined using Join command
    • A. 

      A

    • B. 

      B

    • C. 

      C

    • D. 

      D

  • 27. 
    What happens if you fillet these two lines with radius 0
    • A. 

      Cannot fillet

    • B. 

      Sharp corner

    • C. 

      None

  • 28. 
    When you use the Match Properties command, you can select multiple source objects.
    • A. 

      True

    • B. 

      False

  • 29. 
    Using object snaps to select points for Inquiry commands is Critical
    • A. 

      True

    • B. 

      False

  • 30. 
    By selecting one of the following, the Objects on the layer are not visible and are not considered when the drawing is regenerated.
    • A. 

      When you off the layer

    • B. 

      When you froze the layer

    • C. 

      When you lock the layer

    • D. 

      None

  • 31. 
    When using copy with grips, select Copy after you have selected an option, such as Move, Mirror, Rotate, Scale, or Stretch.
    • A. 

      True

    • B. 

      False

  • 32. 
    If you need the text to be reversed, when you mirror the text,then you need to set
    • A. 

      MIRRTEXT to 0

    • B. 

      MIRRTEXT to 1

    • C. 

      TEXTMIRR to 0

    • D. 

      TEXTMIRR to 1

  • 33. 
    Inorder to get the below result using Object A, you have to set the number of rows and columns to:
    • A. 

      4,1

    • B. 

      4,2

    • C. 

      4,3

    • D. 

      4,4

  • 34. 
    Copy command also creates Multiples copies of an object
    • A. 

      True

    • B. 

      False

  • 35. 
    What is the angle that you use to rotate the chair from point A to point B?
    • A. 

      90

    • B. 

      -90

    • C. 

      -270

    • D. 

      None

  • 36. 
    With a hot grip you can perform these editing tasks
    • A. 

      Move

    • B. 

      Offset

    • C. 

      Rotate

    • D. 

      Scale

  • 37. 
    Inorder to Move an object
    • A. 

      Select a base point,followed by a point to define where the object is moving to.

    • B. 

      Use the Displacement option

    • C. 

      Select object for grips, then move

    • D. 

      Above all

  • 38. 
    The following settings can be made for polar tracking
    • A. 

      Increment angle

    • B. 

      Additional angles

    • C. 

      Track using all polar angles settings

  • 39. 
    Object snap tracking works in combination with object snaps to enable you to temporarily acquire and track up to how many points?
    • A. 

      One

    • B. 

      Two

    • C. 

      Five

    • D. 

      Seven

  • 40. 
    One of the below options is wrong about type of Autocad drawing units.
    • A. 

      Architectural

    • B. 

      Engineering

    • C. 

      Millimeter

    • D. 

      Decimal

  • 41. 
    By default, AutoCAD has the following workspaces
    • A. 

      2D Drafting & Annotation

    • B. 

      3D Modeling

    • C. 

      My workspace

    • D. 

      AutoCAD Classic

  • 42. 
    Which Key do you press to cycle through the available snap points.
    • A. 

      Ctrl

    • B. 

      Shift

    • C. 

      Tab

    • D. 

      Alt

  • 43. 
    What type of Island detection type is this?
    • A. 

      Inner

    • B. 

      Outer

    • C. 

      Ignore

    • D. 

      Normal

  • 44. 
    Using Purge command we can purge referenced blocks.
    • A. 

      True

    • B. 

      False

  • 45. 
    When you Explode a block, the geometry returns to its original properties.
    • A. 

      True

    • B. 

      False

  • 46. 
    Options used to draw this polyline;
    • A. 

      Line

    • B. 

      Arc

    • C. 

      Tamper

    • D. 

      Width

  • 47. 
    You cannot fillet or chamfer the first segment of a polyline with the last segment of the same polyline.
    • A. 

      True

    • B. 

      False

  • 48. 
      If you create objects on layer 0, they cannot be moved to different layer.
    • A. 

      True

    • B. 

      False

  • 49. 
    You can freeze the layer in the current viewport when the layout viewport is active.
    • A. 

      True

    • B. 

      False

  • 50. 
    Several running objects snaps are on,more than one object snap may be eligable at a given location. you can press the CTRL key to cycle through the possibilities before you specify the object snap.
    • A. 

      True

    • B. 

      False

  • 51. 
      When you stretch objects,you must define the stretch windows using a crossing window or crossing polygon.
    • A. 

      True

    • B. 

      False

  • 52. 
    While trimming, you select the portion of the objects to trim, not the portion to keep.
    • A. 

      True

    • B. 

      False

  • 53. 
      To remove the jog symbol from a jogged linear dimension, use the erase command and then the join command to clean up the gap.
    • A. 

      True

    • B. 

      False

  • 54. 
    When you use the join command to join lines the line segments cannot overlap.
    • A. 

      True

    • B. 

      False

  • 55. 
    When using the MATCHPROP (Match properties) command, you can match properties from objects in one drawing to another drawing that is opened.
    • A. 

      True

    • B. 

      False

  • 56. 
    When using the MATCHPROP(match properties) command, you can select more than one source object.
    • A. 

      True

    • B. 

      False

  • 57. 
    With Noun-Verb selection turned on in the software, you can select the objects to move prior to starting the move comman
    • A. 

      True

    • B. 

      False

  • 58. 
    You can add layouts to your current drawing based on a layout in template file.
    • A. 

      True

    • B. 

      False

  • 59. 
    If you explode Multiline text it becomes single line text.
    • A. 

      True

    • B. 

      False

  • 60. 
    The ID point command returns the coordinate of the point you select using the current units of the drawing.
    • A. 

      True

    • B. 

      False

  • 61. 
    You can edit multine text, but it becomes single line text.
    • A. 

      True

    • B. 

      False

  • 62. 
    You can create numbered and bulleted lists with Mtext
    • A. 

      True

    • B. 

      False

  • 63. 
    Changes made to a text style affect all text objects that use the style.
    • A. 

      True

    • B. 

      False

  • 64. 
    If you modify a dimension style, all dimesions using that style in the drawing update automatically.
    • A. 

      True

    • B. 

      False

  • 65. 
    The only way to preview your plot is from the Plot Dialog box.
    • A. 

      True

    • B. 

      False

  • 66. 
    When you explode a block, the geometry returns to its original properties.
    • A. 

      True

    • B. 

      False

  • 67. 
    To rotate an object in 3-D space, you use the..
    • A. 

      Rotate command

    • B. 

      3D rotate command

    • C. 

      Rotate 3D command

    • D. 

      Revolve

  • 68. 
    Is line thickness a true 3-D method of drawing
    • A. 

      Yes

    • B. 

      Yes , but only in autocad LT

    • C. 

      Yes , but only if you use lots of layers

    • D. 

      No, it is only a representation

  • 69. 
    How can you check if a line is drwn in 3D
    • A. 

      You cant

    • B. 

      Dimension it

    • C. 

      Press F5

    • D. 

      Check the lines properties

  • 70. 
    By default, autocad has the following workspace
    • A. 

      2D drafting& annotation, 3D modeling, autocad classic

    • B. 

      4D modeling

    • C. 

      My workspace

    • D. 

      Autocad 2021