Annual Inspections
10 Questions
| Attempts: 110
How much do you know about performing annual inspections?
Questions and Answers
- 1.
What is the Re-Adjustment limit on a 30/30 long stroke type brake chamber?
- A.
3 inches
- B.
2 inches
- C.
2 1/2 inches
- D.
1 inch
- E.
None of the above
Correct Answer
B. 2 inchesExplanation
Re adjustment limit is 2 inches on a 30/30 chamber regardless of long stroke or standardRate this question:
-
- 2.
Where does an exhaust leak Fail on a Truck?
- A.
Any exhaust leak at any point from manifold to exhaust tip
- B.
Exhaust Leak directly below the cab and forward
- C.
Around only clamps or flex pipe
- D.
None of the above
- E.
All of the above
Correct Answer
B. Exhaust Leak directly below the cab and forwardExplanation
Exhaust leaks on rear of cab above the lowest point of the cab is a passRate this question:
-
- 3.
Does a single crack in a windshield fail an inspection?
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
A Single crack, provided it does not intersect with any other crack is a pass conditionRate this question:
-
- 4.
A driver has added several marker lamps to there vehicle, Some of the additional lamps are not working, However, Required lamps are functional. Is the non operating additional lamps a pass or fail condition?
- A.
Pass Condition
- B.
Fail Condition
Correct Answer
A. Pass ConditionExplanation
§393.9 Lamps operable, prohibition of obstructions of lamps and reflectors.
(a) All lamps required by this subpart shall be capable of being operated at all times. This paragraph shall not be construed to require that any auxiliary or additional lamp be capable of operating at all times.Rate this question:
-
- 5.
It is Required to have reflective tape on the mudflap brackets or at the rear lowest left and right point of the Tractor?
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
A tractor must have Conspicuity Treatment (reflective tape)at the rear most part of the truck and as far apart as practicalRate this question:
-
- 6.
Amber tail lamps which come on with the marker lamps or head lamps are acceptable, as long as they are used with a turn signal?
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
Amber lights may not be used as a tail lamp or brake lamp. only may be used as an indicator for turn signals. If the light illuminates when pressing the brake, it fails. It may not illuminate with marker lights ONLY AS A TURN SIGNALRate this question:
-
- 7.
A Tie rod end appears loose. There is 1/4 inch or up down movement. Pass or fail
- A.
Pass
- B.
Fail
Correct Answer
B. FailExplanation
Rotational movement onlyRate this question:
-
- 8.
A Steer tire on a tractor has 5/32nd tread depth in the middle of the tire, however, the shoulder area is below 2/32, Is a pass or fail condition?
- A.
Pass
- B.
Fail
Correct Answer
A. PassExplanation
DOT requires checking tires in a 'Major tread groove', which is defined as having wear indicators. The shoulder area of the tire where manufactures install a wear rib is a design characteristic only.Rate this question:
-
- 9.
A straight truck is being inspected, there Is no reflective tape on the rear bumper or impact guard, Pass or fail?
- A.
Pass
- B.
Fail
Correct Answer
A. PassExplanation
Straight trucks are exemptRate this question:
-
- 10.
If a truck has issues pertaining to "out of service criteria" Any inspector may put the vehicle out of service?
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
only authorized agents may put a vehicle out of serviceRate this question:
-
Quiz Review Timeline +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Jan 07, 2013Quiz Edited by
ProProfs Editorial Team -
Oct 15, 2009Quiz Created by
Blinkerfluid
Back to top