Aerospace Ground Equipment CDC Vol. 1 Quiz

73 Questions

Settings
Please wait...
Aerospace Ground Equipment CDC Vol. 1 Quiz

Includes all unit review questions from Volume 1. This is the newest CDC set (Change 05)


Questions and Answers
  • 1. 
    • A. 

      Straigh, right angle and flat

    • B. 

      Pre-insulated, re-insulated and uninsulated

    • C. 

      Red, yellow and blue

  • 2. 
    • A. 

      Red

    • B. 

      Blue

    • C. 

      Yellow

    • D. 

      Green

  • 3. 
    Risk management principles should be applied to
    • A. 

      Only duty-related activities to enhance the safety and well-being of yourself and others

    • B. 

      On- and off- duty activities to enhance the safety and well being of yourself and others

    • C. 

      Only duty-related activities to protect yourself and other airman from imminent harm

    • D. 

      On- and off- duty activities to protect yourself and other airman from imminent harm

  • 4. 
    • A. 

      Using PPE

    • B. 

      Unsafe working conditions

    • C. 

      Known pregnancies

    • D. 

      Personal Injury

  • 5. 
    Before removing a component from an air compressor, you must ensure
    • A. 

      The air compressor is grounded

    • B. 

      The air strainer is in place

    • C. 

      The battery is disconnected

    • D. 

      All air pressure is drained

  • 6. 
    • A. 

      To prevent the energized windings from touching the frame

    • B. 

      To prevent current from following the path of least resistance

    • C. 

      To prevent you from receiving electrical shock if the energized windings touch the frame

    • D. 

      To prevent current from flowing directly to ground if the energized windings touch the frame

  • 7. 
    Which type of hammer should you use to avoid damaging driving materials?
    • A. 

      Claw

    • B. 

      Sledge

    • C. 

      Soft face

    • D. 

      Ball-Peen

  • 8. 
    Which type of screwdriver has blades designed to lessen the possibility of the screwdriver slipping from the screw head?
    • A. 

      Cross point

    • B. 

      Flat-blade

    • C. 

      Cross-tip

    • D. 

      Offset

  • 9. 
    Which pliers should be used to hold odd-shaped objects?
    • A. 

      Snap ring

    • B. 

      Diagonal cutting

    • C. 

      Multiple slip-joint

    • D. 

      Combination slip-joint

  • 10. 
    Which pliers have a locking device to hold materials securely?
    • A. 

      Snap ring

    • B. 

      Vice grips

    • C. 

      Water pump

    • D. 

      Diagonal cutters

  • 11. 
    Diagonal cutting pliers are designed to cut
    • A. 

      Bolts

    • B. 

      Rivets

    • C. 

      Hard steel

    • D. 

      Small wire

  • 12. 
    Before operating the pneumatic impact wrench, you must
    • A. 

      Inspect it

    • B. 

      Lubricate it

    • C. 

      Blow out the air hose

    • D. 

      Ensure that it's use is necessary

  • 13. 
    Replacement hardware decisions on support equipment must be governed by
    • A. 

      Supervisor's preference

    • B. 

      Serviceability criteria

    • C. 

      Cosmetic appearance

    • D. 

      Availability

  • 14. 
    • A. 

      Stud

    • B. 

      Fine thread bolt

    • C. 

      Coarse thread bolt

    • D. 

      General purpose bolt

  • 15. 
    • A. 

      Nonmetallic self-locking nuts

    • B. 

      Metallic self-locking nuts

    • C. 

      Castellated nuts

    • D. 

      Plain nuts

  • 16. 
    • A. 

      Red

    • B. 

      Blue

    • C. 

      Yellow

    • D. 

      Green

  • 17. 
    • A. 

      Military specification

    • B. 

      Type of fitting

    • C. 

      Air Force/Navy

    • D. 

      Fitting Size

  • 18. 
    • A. 

      Scratches

    • B. 

      Chafing

    • C. 

      Dents

    • D. 

      Nicks

  • 19. 
    A flexible hose in a 3,000 psi system must be pressure tested to
    • A. 

      A 3,000 psi without bursting

    • B. 

      A 9,000 psi without bursting

    • C. 

      A 12,000 psi without bursting

    • D. 

      A 15,000 psi without bursting

  • 20. 
    When installing a flexible hose, you must provide slack or bend in the hose to
    • A. 

      Prevent twisting of the hose

    • B. 

      Compensate for change in length

    • C. 

      Place a mechanical load on the hose

    • D. 

      Protect it from a hot pipe or manifold

  • 21. 
    • A. 

      Look for loose objects (stone, paper, or trash), pick them up when discovered, and encourage others to do the same

    • B. 

      Learn the basic classes of FOD, recognize its causes, and account for tools and hardware used during maintenance

    • C. 

      Look for loose objects discarded on the flightline during MX activities

    • D. 

      Periodically participate in "FOD walks" on taxiways and runways

  • 22. 
    You need to find all the TOs for a specific weapon system or piece of equipment. What type of index should you use?
    • A. 

      TO Catalog

    • B. 

      Alphabetical index

    • C. 

      Cross-reference table

    • D. 

      LOAPs

  • 23. 
    You need to find the part number for an item prior to ordering it from supply. You've obtained the appropriate IPB manual for the end-item. What section of the IPB should you use to find the major assembly to which the desired item belongs?
    • A. 

      Table of Contents

    • B. 

      Reference designator index

    • C. 

      Appropriate figure/Illustration

    • D. 

      National stock number and reference number index

  • 24. 
    Which TCTO is issued to correct unsafe conditions that, if not corrected, could result in serious or fatal injury to personnel?
    • A. 

      Safety

    • B. 

      Urgent action

    • C. 

      Immediate action

    • D. 

      Routine action

  • 25. 
    • A. 

      Abbreviated TCTO

    • B. 

      Inspection TCTO

    • C. 

      Record TCTO

    • D. 

      Interim TCTO

  • 26. 
    The main advantage of using abbreviated TOs is they
    • A. 

      Cover safety in more detail

    • B. 

      Serve as supplemental material

    • C. 

      Paraphrase and eliminate the need for basic TOs

    • D. 

      Organize and simplify instructions in a condensed version.

  • 27. 
    Periodic inspection workcards are divided into three sections that cover requirements for
    • A. 

      Periodic, lubrication and special inspections

    • B. 

      Periodic, special inspections, and safety

    • C. 

      Periodic, lubrication, and safety

    • D. 

      Special inspections, lubrication, and safety

  • 28. 
    Which abbreviated TO provides guidance for checking the general serviceability of a piece of equipment including applicable safety warnings, cautions and notes?
    • A. 

      Lubrication charts

    • B. 

      Illustrated parts breakdown

    • C. 

      Service inspection workcards

    • D. 

      Periodic inspection workcards

  • 29. 
    An example of a TO deficiancy is
    • A. 

      Improper sequencing of pages

    • B. 

      Insufficient information

    • C. 

      Typographical errors

    • D. 

      Misspelled words

  • 30. 
    Which form should you submit to correct a TO deficiency?
    • A. 

      AFTO Form 1000, Deficiency Report

    • B. 

      AFTO Form 601A, Change Recommendation

    • C. 

      AFTO Form 95, Support Equipment Record

    • D. 

      AFTO Form 22, Technical Manual Change Recommendation and Reply

  • 31. 
    OIs are similar to Air Force Instructions, but they apply only to
    • A. 

      Air Force Wings

    • B. 

      Support personnel

    • C. 

      Maintenance personnel

    • D. 

      Personnel within the issuing organization

  • 32. 
    • A. 

      Supplements

    • B. 

      Visual Aids

    • C. 

      Bulletins

    • D. 

      Manuals

  • 33. 
    The first number of a standard Air Force publication number is referred to as the "series" and represents
    • A. 

      Braod area covered

    • B. 

      Specific area acovered

    • C. 

      Specific title of the publication

    • D. 

      Specific military personnel affected

  • 34. 
    • A. 

      Air Force e-publishing site

    • B. 

      LOAPs

    • C. 

      Base-level functional publication library

    • D. 

      AFI 33-360

  • 35. 
    A unit has been removed from service, pending compliance with an urgent-action TCTO. What MX symbol represents the task?
    • A. 

      Red X

    • B. 

      Red -

    • C. 

      Red /

  • 36. 
    • A. 

      Pamphlets and manuals

    • B. 

      Departmental and field

    • C. 

      Instructions and manuals

    • D. 

      Supplements and instructions

  • 37. 
    • A. 

      Increasing bottlenecks and maximizing repair cycle time

    • B. 

      Increasing bottlenecks and minimizing repair cycle time

    • C. 

      Eliminating bottlenecks and maximizing repair cycle time

    • D. 

      Eliminating bottlenecks and minimizing repair cycle time

  • 38. 
    Which maintenance levels are considered together as "field maintenance"?
    • A. 

      Centralized and depot

    • B. 

      Depot and provisional

    • C. 

      Provisional and centralized

    • D. 

      Organizational and intermediate

  • 39. 
    Organizational maintenance consists of
    • A. 

      On-equipment tasks normally performed using resources of an operating command at an operating location

    • B. 

      On-equipment tasks normally performed using the resources of a supporting command or intermediate repair facility

    • C. 

      Off-equipment tasks normally performed using the resources of an operating command at an operating location or intermediate repair facility

    • D. 

      On- or off-equipment tasks that require highly specialized skills, sophisticated shop equipment, and/or special facilities of a supporting command

  • 40. 
    The main purpose of the inspection system is to
    • A. 

      Get ahead on unscheduled maintenance

    • B. 

      Keep equipment operating and looking good

    • C. 

      Keep the mechanic working on minor problems

    • D. 

      Locate problems and repair equipment before total failure

  • 41. 
    The maintenance symbol that represents the most serious operational condition for equipment is a
    • A. 

      Red X

    • B. 

      Red dash

    • C. 

      Red diaganol

    • D. 

      Circled red X

  • 42. 
    Which section of AFTO form 244 is used to record a forms review?
    • A. 

      Part II, Non-scheduled inspection

    • B. 

      Part III, Scheduled inspection

    • C. 

      Part IV, Supervisory Review

    • D. 

      Part V, Maintenance/Delayed Discrepancy

  • 43. 
    • A. 

      A red X and yoru initials in Part IV, Supervisory Review

    • B. 

      A red X and your initials in Part III, Scheduled inspections

    • C. 

      The letters "CF" (for carried forward) and your initials in Part IV, Supervisory Review

    • D. 

      The letters "CF" (for carried forward) and yoru initials in Part III, Scheduled Inspections

  • 44. 
    • A. 

      Unserviceable (Condemned)

    • B. 

      Unserviceable (Reparable)

    • C. 

      Serviceable

    • D. 

      Suspended

  • 45. 
    • A. 

      Brown

    • B. 

      Green

    • C. 

      White

    • D. 

      Yellow

  • 46. 
    • A. 

      AF Form 2005

    • B. 

      AFTO Form 350

    • C. 

      DD Form 1348-6

    • D. 

      DD Form 1348-1A

  • 47. 
    • A. 

      Type Maintenance

    • B. 

      Work Unit Code

    • C. 

      Category of Labor

    • D. 

      Units

  • 48. 
    Distinguish between "excess" and "surplus" as they apply to the Air Force supply discipline.
    • A. 

      Excess and surplus are the same

    • B. 

      Excess and surplus are the turn-in of property no longer needed.

    • C. 

      Surplus is property no longer needed at your bae, and excess is property no longer needed by another military service or federal agency

    • D. 

      Excess is property no longer needed at your base, and surplus is property no longer needed by another military service or federal agency.

  • 49. 
    • A. 

      Use them only for their intended purposes

    • B. 

      Always order the least expensive item to do the job

    • C. 

      Protect items from hazards such as fire or corrosion

    • D. 

      Order only the minimum supplies necessary to do a job

  • 50. 
    • A. 

      Commander

    • B. 

      Supervisor

    • C. 

      Person who signed for an account

    • D. 

      Person who has possession of the property

  • 51. 
    To be held responsible for property, you must
    • A. 

      Possess it.

    • B. 

      Sign for it.

    • C. 

      Be a 5 level.

    • D. 

      Be a supervisor

  • 52. 
    • A. 

      Leave it where you found it.

    • B. 

      Place it back int eh supply system.

    • C. 

      Take the item to the organizational commander.

    • D. 

      Take it to the security forces lost and found section

  • 53. 
    • A. 

      Items less than $2500

    • B. 

      Items less than $25000

    • C. 

      Items more than $2500

    • D. 

      Items more than $25000

  • 54. 
    Items that retain their identity throughout the period of their use and may be turned in and reissued for use by others are considered
    • A. 

      DIFM

    • B. 

      Excess

    • C. 

      Expendable

    • D. 

      Nonexpendable

  • 55. 
    When the bench stock quantity level falls below 50 percent for an item, you should
    • A. 

      Post a due-out list

    • B. 

      Place a red tag on the bin

    • C. 

      Notify supply that stock level is low

    • D. 

      Initial the initial supply stock listing

  • 56. 
    The responsibility of a person to make good any loss, destruction, or damage of government property caused by misuse or neglect is what kind of liability?
    • A. 

      Property

    • B. 

      Personal

    • C. 

      Pecuniary

    • D. 

      Command

  • 57. 
    • A. 

      Turn-in Only

    • B. 

      Transfer only

    • C. 

      Turn-in or transfer

    • D. 

      Cash collection voucher or statement of charges

  • 58. 
    A statement of charges would be prepared under which of these circumstances?
    • A. 

      If a lost item is not expendable

    • B. 

      If you make a cash payment for a lost item

    • C. 

      If you signed a hand receipt for a lost item

    • D. 

      If you want to use a payroll deduction to pay the cost of a lost item

  • 59. 
    • A. 

      A report of survey must be initiated

    • B. 

      A statement of charges must be prepared

    • C. 

      Charges must be made on a military pay order

    • D. 

      The mower must be replaced by one of equivalent value

  • 60. 
    After a deficiency has been discovered, when must a category II PQDR be submitted to the screening point?
    • A. 

      24 hours

    • B. 

      2 calender days

    • C. 

      5 calender days

    • D. 

      10 calender days

  • 61. 
    Within the deficiency reporting system, who is responsible for the resolution of the deficiency?
    • A. 

      Originating point

    • B. 

      Screening point

    • C. 

      Action point

    • D. 

      Support point

  • 62. 
    Within the deficiency reporting system, who assigns a report control number and ensures proper marking and handling of exhibits?
    • A. 

      Originating point

    • B. 

      Screening point

    • C. 

      Action point

    • D. 

      Support point

  • 63. 
    • A. 

      MAJCOM AGE functional managers

    • B. 

      Screening point within the originating activity

    • C. 

      Lead Command (AFMC)

    • D. 

      WR-ALC

  • 64. 
    On which type of metal can you leave corrosion as long as the component is operational?
    • A. 

      Steel

    • B. 

      Copper

    • C. 

      Aluminum

    • D. 

      None, all corrosion must be removed

  • 65. 
    • A. 

      Informational

    • B. 

      Safety/Danger

    • C. 

      Reflectorization

    • D. 

      Caution/Warning

  • 66. 
    Guidelines for storing AGE are in
    • A. 

      TO 35-1-3

    • B. 

      TO 35-1-4

    • C. 

      TO 35-1-12

    • D. 

      AFMAN 23-110

  • 67. 
    Which of these items must be removed from test equipment before storage?
    • A. 

      Wet and dry cell batteries

    • B. 

      Dry charge batteries

    • C. 

      Battery compartment

    • D. 

      Battery holder

  • 68. 
    During a battery condition check, what is an acceptable voltage reading for a 12-volt battery?
    • A. 

      8-2 volts

    • B. 

      10-12 volts

    • C. 

      12.4 volts or lower

    • D. 

      12.7 volts or higher

  • 69. 
    After connecting a voltmeter across the starter terminals and clamping a current probe around the positive battery cable, what must be done prior to cranking the engine when performing a starting system check on AGE?
    • A. 

      Estimate the temperature of the battery

    • B. 

      Prevent the engine from starting

    • C. 

      Perform a battery cable test

    • D. 

      Disconnect the voltmeter

  • 70. 
    • A. 

      Only when a guide is posted

    • B. 

      Within 25 feet of an aircraft with engines running

    • C. 

      With the driver's side of the vehicle toward the aircraft

    • D. 

      With the driver's side of the vehicle away from the aircraft

  • 71. 
    • A. 

      Turn off your headlights and leave your parking lights on

    • B. 

      Dim your headlights and continue on

    • C. 

      Stop and change directions

    • D. 

      Turn all lights off

  • 72. 
    • A. 

      To keep rims from flying apart

    • B. 

      To keep water from entering the rims

    • C. 

      As a treatment for weather cracks

    • D. 

      As a treatment for severe corrosion

  • 73. 
    • A. 

      Fully deflate the tire

    • B. 

      Torque wheel lug bolts

    • C. 

      Check tires for foreign objects

    • D. 

      Ensure rims are completely bolted together and torqued