Acad/HCAD Assessment Part 2

19 Questions | Total Attempts: 52

Acad/HCAD Assessment Part 2 - Quiz

Questions and Answers
  • 1. 
    See picture 1 and answer questions 1 thru 4 What is the Command to open the Bill of Materials?
  • 2. 
    When we move a panel manually, you have to connect it to the wall line so HCAD recognizes it and  adds clamps, ties and accessories.  What is the command that connects a panel to a wall line?
  • 3. 
    What is the command that deletes panels and accesories without deleting wall lines or any other objects?  See video below.  
  • 4. 
    Deletes Panels question 3
  • 5. 
    What is the command that changes ties and accesories on a layout?  (See video below)
  • 6. 
    Change Taper Tie
  • 7. 
    See the picture below and answer questions 5 thru 7. What command changes the mode from inserting panels and accessories step by step to inserting all panels and acessories on one wall at a time?             
  • 8. 
    What is the command that moves panels from one point to another? (See the video below)
  • 9. 
    Move Panel
  • 10. 
    What is the command that opens the Window,  "HCAD Settings for the modular wall"?  (See Picture)
  • 11. 
    See the picture below  and answer questions 8 and 9. What is the setting to control the tie size and avoid the problem shown on the picture below?
  • 12. 
    Explain what happens when you put a check mark  in the box  " Use gang set"  (see Leader 8) when using Harsco Lite.
  • 13. 
    What is the purpose of the setting  "Frame Count"   when using GASS Tower Maker?  (See picture)
  • 14. 
    What is the purpose of the setting "Bolt Embed" when using 20K_20KA Tower Maker?  (See Picture)
  • 15. 
    See picture below and answer questions 12 and 13. What is the command that allows us to add extra items to our BOM?
  • 16. 
    What command sends the BOM to a different template ready for sales personel?
  • 17. 
    See the picture below and answer question 14. On this GASS Tower, what does the symbol M1 represent?
  • 18. 
    As you know, Stringers and Joists have annotated TEXT. The Stringer shown in picture 1, was inserted into the drawing with the settings set as shown in picture 2. In what scale will the text be visable?    (You can select more than one answer) Picture 1 Picture 2
    • A. 

      Text will be visible on all scales and it will adjust its size automatically.

    • B. 

      Text will be visible in 1/8" scale only.

    • C. 

      Text will not be visible in 1/8" scale.

    • D. 

      I don't know.

  • 19. 
    If you want the text of the stringer shown on question 15 to be visible at 1/4", what is the procedure that you have to follow?
    • A. 

      You don't have to do anything, because the text will scale automatically according to the scale of the new View Port.

    • B. 

      Click on "Sync Scale" and select 1/4"

    • C. 

      Click on "Add/Delete scales" and add 1/4" scale to the object

    • D. 

      I don't know

  • 20. 
    See the picture below and answer question 17. What is the command that allows you to do quick dimensions?  (See the video below)
  • 21. 
  • 22. 
    Name the Standard Dimension Style for Harsco Engineering LLC.
  • 23. 
    Name the Standard Text Style for Harsco Engineering LLC.
Back to Top Back to top

Here's an interesting quiz for you.

We have other quizzes matching your interest.