AutoCAD Test: Part 01

35 Kesyon

Settings
Please wait...
AutoCAD Test: Part 01

Questions and Answers
  • 1. 
    L  enter 0,0 @1000<0 @1000<90 @1000<180 @1000<270 What will these commands produce?
    • A. 

      Multiple circles

    • B. 

      A meter by meter square

    • C. 

      Four points randomly placed on the page

  • 2. 
    What tool is used to put a radius on a existing intersection?
    • A. 

      Trim

    • B. 

      Extened

    • C. 

      Ortho

    • D. 

      Fillet

  • 3. 
    What tool is used to draw a line parallel to a existing line at a exact distance from it?
    • A. 

      Ray

    • B. 

      Ortho

    • C. 

      Offset

    • D. 

      Polyline

  • 4. 
    What type of line is drawn from one to infinity in one direction?
    • A. 

      Poly line

    • B. 

      Ray line

    • C. 

      Construction line

    • D. 

      Dashed Line

  • 5. 
    What is the shortcut key for ortho?
    • A. 

      F5

    • B. 

      Enter

    • C. 

      F10

    • D. 

      F8

    • E. 

      Escape

  • 6. 
    Does the template set up the machine or does it set up the drawing?
    • A. 

      Machine

    • B. 

      Drawing

  • 7. 
    A rectangle drawn with the rectangle tool  is four separate lines or four lines joined together?
    • A. 

      Four lines joined together

    • B. 

      Four seperate lines

  • 8. 
    What is a block in Autocad?
    • A. 

      A square drawn by four separate lines

    • B. 

      A rectangle drawn with the rectangle tool

    • C. 

      A drawing that can be reused in the current drawing or brought in from another drawing

  • 9. 
    What tool  is being pointed to in the image?
    • A. 

      Copy

    • B. 

      Scale

    • C. 

      Trim

    • D. 

      Offset

    • E. 

      Extened

  • 10. 
    To select the centre of a line what option must be selected?
    • A. 

      Ortho

    • B. 

      Dynamic input

    • C. 

      Object snap

  • 11. 
    To draw a horizontal line from right to left what direction would it be?
    • A. 

      90

    • B. 

      180

    • C. 

      0

    • D. 

      270

  • 12. 
    What tool  is being pointed to in the image?
    • A. 

      Break

    • B. 

      Mirror

    • C. 

      Offset

    • D. 

      Move

  • 13. 
    What tool  is being pointed to in the image?
    • A. 

      Copy

    • B. 

      Offset

    • C. 

      Erase

    • D. 

      Trim

    • E. 

      Scale

  • 14. 
     Autocad drawings have what extension?
    • A. 

      .dwt

    • B. 

      .dwg

    • C. 

      .doc

    • D. 

      .jpg

  • 15. 
    When selecting with the green marquee does the object need to be touched by the green area or be contained to be selected ?
    • A. 

      Contained

    • B. 

      Touching

  • 16. 
    To draw a line what information must be known? Multiple answers are allowed.
    • A. 

      Starting point

    • B. 

      Height

    • C. 

      Colour

    • D. 

      Length

    • E. 

      Direction

  • 17. 
    To plot a drawing is to do what?
    • A. 

      Add a new layer

    • B. 

      Print it

    • C. 

      Add some key points

  • 18. 
    If you modify a dimension style, all dimensions using that style in the drawing update automatically.
    • A. 

      True

    • B. 

      False

  • 19. 
    With the Multiline Text editor, you can do all of the following, except:
    • A. 

      Insert numbered and bulleted lists

    • B. 

      Insert specific drafting and engineering symbols

    • C. 

      Insert pictures

    • D. 

      Create Fields such as date, time and author.

  • 20. 
    The following are some of the properties and settings that you can save in a layout, except
    • A. 

      Plot scale

    • B. 

      Paper size

    • C. 

      Line weight

    • D. 

      Drawing orientation

  • 21. 
    What happens if you fillet these two lines with radius 0
    • A. 

      Cannot fillet

    • B. 

      Sharp corner

    • C. 

      None

  • 22. 
    When you use the Match Properties command, you can select multiple source objects.
    • A. 

      True

    • B. 

      False

  • 23. 
    Using object snaps to select points for Inquiry commands is Critical
    • A. 

      True

    • B. 

      False

  • 24. 
    By selecting one of the following, the Objects on the layer are not visible and are not considered when the drawing is regenerated.
    • A. 

      When you off the layer

    • B. 

      When you froze the layer

    • C. 

      When you lock the layer

    • D. 

      None

  • 25. 
    When using copy with grips, select Copy after you have selected an option, such as Move, Mirror, Rotate, Scale, or Stretch.
    • A. 

      True

    • B. 

      False

  • 26. 
    If you need the text to be reversed, when you mirror the text,then you need to set
    • A. 

      MIRRTEXT to 0

    • B. 

      MIRRTEXT to 1

    • C. 

      TEXTMIRR to 0

    • D. 

      TEXTMIRR to 1

  • 27. 
    Copy command also creates Multiples copies of an object
    • A. 

      True

    • B. 

      False

  • 28. 
    What is the angle that you use to rotate the chair from point A to point B?
    • A. 

      90

    • B. 

      -90

    • C. 

      -270

    • D. 

      None

  • 29. 
    With a hot grip you can perform these editing tasks
    • A. 

      Move

    • B. 

      Offset

    • C. 

      Rotate

    • D. 

      Scale

  • 30. 
    Inorder to Move an object
    • A. 

      Select a base point,followed by a point to define where the object is moving to.

    • B. 

      Use the Displacement option

    • C. 

      Select object for grips, then move

    • D. 

      Above all

  • 31. 
    The following settings can be made for polar tracking
    • A. 

      Increment angle

    • B. 

      Additional angles

    • C. 

      Track using all polar angles settings

  • 32. 
    Object snap tracking works in combination with object snaps to enable you to temporarily acquire and track up to how many points?
    • A. 

      One

    • B. 

      Two

    • C. 

      Five

    • D. 

      Seven

  • 33. 
    One of the below options is wrong about type of Autocad drawing units.
    • A. 

      Architectural

    • B. 

      Engineering

    • C. 

      Millimeter

    • D. 

      Decimal

  • 34. 
    By default, AutoCAD has the following workspaces
    • A. 

      2D Drafting & Annotation

    • B. 

      3D Modeling

    • C. 

      My workspace

    • D. 

      AutoCAD Classic

  • 35. 
    Which Key do you press to cycle through the available snap points.
    • A. 

      Ctrl

    • B. 

      Shift

    • C. 

      Tab

    • D. 

      Alt