5 Level CDC Test, Vol 2

100 Questions | Total Attempts: 404

SettingsSettingsSettings
CDC Quizzes & Trivia

5 Level CDC Test, Vol 2


Questions and Answers
  • 1. 
    1. A shipper is responsible for
    • A. 

      Planning, assembling, consolidating, and documenting a shipment and arranging for its movement

    • B. 

      Ensuring a shipment is complete and removing RFID tags

    • C. 

      Clearing shipments and initiating TDR as necessary

    • D. 

      Challenging shipments that do not meet applicable airlift requirements

  • 2. 
    2. Which of the following is not a purpose of the advance TCMD?
    • A. 

      It provides a way to process a shipment through the ACA

    • B. 

      It allows cargo processors to calculate critical leg ACL information

    • C. 

      It allows APOE to easily and efficiently manifest the shipment

    • D. 

      It provides notification to the APOE that a shipment is inbound and requires further transfer

  • 3. 
    3. What is another name for a receiver?
    • A. 

      A vendor

    • B. 

      A consignor

    • C. 

      A consignee

    • D. 

      A transshipper

  • 4. 
    4. Who is responsible for ensuring a shipment is complete and removing any RDIF tags?
    • A. 

      The shipper

    • B. 

      The receiver

    • C. 

      The transshiper

    • D. 

      The CSB

  • 5. 
    5. When is a shipment, other than TP-4 cargo, considered cleared by the ACA?
    • A. 

      When the direct delivery vendor prepares the invoice

    • B. 

      When you have scanned the bar-coded label and determined it is not in the DTS

    • C. 

      When the CCP has delivered an airlift-ready pallet to the APOE

    • D. 

      When the ACA has not challenged the shipment by the hour/day entered in the ATCMD date shipped field

  • 6. 
    6. How many cargo application do the GATES HHTs provide access to?
    • A. 

      15

    • B. 

      16

    • C. 

      17

    • D. 

      18

  • 7. 
    7. You perform a soft reset on the HHT by pressing
    • A. 

      Ctrl + Alt + Del Keys

    • B. 

      Shift + Escape + Send Keys

    • C. 

      Contrast + Delete + Enter Keys

    • D. 

      Alpha + Functions + Backlight keys

  • 8. 
    8. What two types of information are entered on the TCMD?
    • A. 

      Prime data and trailer data

    • B. 

      Prime data and secondary data

    • C. 

      Secondary data and trailer data

    • D. 

      Temporary data and permanent data

  • 9. 
    9. Which appendix in Part II of the Defense Transportation Regulation explains how to fill out a TCMD block-by-block?
    • A. 

      Appendix L

    • B. 

      Appendix M

    • C. 

      Appendix O

    • D. 

      Appendix P

  • 10. 
    10. What do the air commodity and special handling codes tell you?
    • A. 

      How the shipment is packaged

    • B. 

      Whether shipments have one or more outsized dimensions

    • C. 

      The nature of the shipment and how it should be treated

    • D. 

      The specific method of transportation for each segment of movement

  • 11. 
    11. Which position of the TCN identifies a partial shipment?
    • A. 

      The first position

    • B. 

      The 16th position

    • C. 

      The 17th position

    • D. 

      The last position

  • 12. 
    12. Which TP includes shipments requiring routine transportation?
    • A. 

      TP-1

    • B. 

      TP-2

    • C. 

      TP-3

    • D. 

      TP-4

  • 13. 
    13. Which TP is considered "deferred air freight" and is moved as last priority, only if there is room on a given aircraft?
    • A. 

      TP-1

    • B. 

      TP-2

    • C. 

      TP-3

    • D. 

      TP-4

  • 14. 
    14. How many days must TP 4 cargo remain at an aerial port before the air terminal manager (ATM) can decide to send it through surface modes or upgrade it to TP-2?
    • A. 

      15 days

    • B. 

      20 days

    • C. 

      30 days

    • D. 

      45 days

  • 15. 
    15. The three-position date shipped code is comprised of the
    • A. 

      Three-digit Julian date

    • B. 

      ETA code and the last two digits of the Julian date

    • C. 

      GMT hour code and the last two digits of the Julian date

    • D. 

      GMT hour code and the ETA code

  • 16. 
    16. When receiving a shipment into the air terminal, you do not have to inspect for
    • A. 

      Matching documentation

    • B. 

      Signs of damage or pilferage

    • C. 

      Appropriate markings and labels

    • D. 

      Correct NSNs

  • 17. 
    17. Identification markings and labels tell you
    • A. 

      What the shipment is

    • B. 

      How to refuse a shipment

    • C. 

      How to handle a shipment

    • D. 

      Where the shipment came from and where it is going

  • 18. 
    18. You place two MSLs on any time over how many cubic feet?
    • A. 

      5

    • B. 

      10

    • C. 

      15

    • D. 

      20

  • 19. 
    19. You must correct a discrepancy with a shipment received at your terminal
    • A. 

      Always; no exceptions

    • B. 

      When the shipper delivers the cargo

    • C. 

      When the discrepancy is minor and you can correct it on the spot

    • D. 

      When the discrepancy is major and requires significant repacking

  • 20. 
    20. Which form do you use to frustrate a shipment?
    • A. 

      AMC form 33

    • B. 

      SF Form 361

    • C. 

      SF Form 364

    • D. 

      DD Form 1387

  • 21. 
    21. After the CSB/ACA corrects the frustrated shipment and returns the original AMC Form 33 to the work center that frustrated the shipment; what actions mus the work center take?
    • A. 

      Initial both copies and retain them for their files

    • B. 

      Retain one copy for their files and discard the original

    • C. 

      Compare it to the copy they have on file to ensure all discrepancies were corrected and file them both

    • D. 

      Compare it to the copy they have on file to ensure all discrepancies were corrected and file the original

  • 22. 
    22. What must you annotate on both copies of the TCMD when receipting for a shipment?
    • A. 

      Your initials and the date you received the cargo

    • B. 

      The pieces, weight and cube of the shipment ad the carrier driver's name

    • C. 

      The GMT hour code and last two digits of the Julian date or arrival

    • D. 

      You full name, rank, social security number, signature, and the time and date you received the cargo

  • 23. 
    23. When the SET is equal for two or more shipments, you determine which shipments are processed first by using the
    • A. 

      Air commodity and special handling code

    • B. 

      Expedited handling indicators and the RDD

    • C. 

      TAC, project code, and type pack code

    • D. 

      Split/partial shipment code, air dimension code, and DI code

  • 24. 
    24. Within how many hours of receipt must you process all cargo?
    • A. 

      2 hours

    • B. 

      6 hours

    • C. 

      12 hours

    • D. 

      18 hours

  • 25. 
    25. You finalize the receipt of a shipment by
    • A. 

      Turning it over to the appropriate pallet build up agency

    • B. 

      Loading the shipment onto a K-loader and taking it out to the aircraft

    • C. 

      Writing the warehouse location or assigned pallet identifier in block 25c of the TCMD

    • D. 

      Completing a DD form 1907 and having load planning personnel sign for the shipment

Back to Top Back to top