2w171 CDC Pretest
2W171 CDC Pretest
- 1.
(001) Who is the weapons expediter directly responsible to for all armament systems maintenance and munitions loading operation?
- A.
Production superintendent
- B.
Squadron commander
- C.
Weapons section NCOIC
- D.
Wing weapons manager
Correct Answer
C. Weapons section NCOIC -
- 2.
(001) Who is the weapons expediter directly responsible to for all armament systems maintenance and munitions loading operation?
- A.
Production superintendent
- B.
Squadron commander
- C.
Weapons section NCOIC
- D.
Wing weapons manager
Correct Answer
C. Weapons section NCOIC -
- 3.
(001) Who establishes maintenance priorities that the weapons expediter must respond to?
- A.
Squadron commander
- B.
Wing weapons manager
- C.
Weapons section NCOIC
- D.
Production superintendent
Correct Answer
D. Production superintendent -
- 4.
(001) Who establishes maintenance priorities that the weapons expediter must respond to?
- A.
Squadron commander
- B.
Wing weapons manager
- C.
Weapons section NCOIC
- D.
Production superintendent
Correct Answer
D. Production superintendent -
- 5.
(002) What provides guidance on what aircraft systems are required for specific missions?
- A.
Approved mission subset listing
- B.
Critical mission systems list
- C.
Mission critical systems list
- D.
Minimum essential subsystem list
Correct Answer
D. Minimum essential subsystem list -
- 6.
(002) What provides guidance on what aircraft systems are required for specific missions?
- A.
Approved mission subset listing
- B.
Critical mission systems list
- C.
Mission critical systems list
- D.
Minimum essential subsystem list
Correct Answer
D. Minimum essential subsystem list -
- 7.
(002) Who is responsible for making sure the weapons load training aircraft(WLT) is properly configured?
- A.
Weapons load crew chief
- B.
Production superintendent
- C.
Weapons standardization section
- D.
Weapons expediter
Correct Answer
D. Weapons expediter -
- 8.
(002) Who is responsible for making sure the weapons load training aircraft(WLT) is properly configured?
- A.
Weapons load crew chief
- B.
Production superintendent
- C.
Weapons standardization section
- D.
Weapons expediter
Correct Answer
D. Weapons expediter -
- 9.
(003) What level of command has the authority to develop procedures for identifying impounded aircraft or equipment and specify impoundment release authority?
- A.
Squadron
- B.
Group
- C.
Wing
- D.
Major command (MAJCOM)
Correct Answer
D. Major command (MAJCOM) -
- 10.
(003) What level of command has the authority to develop procedures for identifying impounded aircraft or equipment and specify impoundment release authority?
- A.
Squadron
- B.
Group
- C.
Wing
- D.
Major command (MAJCOM)
Correct Answer
D. Major command (MAJCOM) -
- 11.
(003) Who is responsible for ensuring only authorized personnel have access to impounded aircraft or equipment?
- A.
Aircraft crew chief
- B.
Production superintendent
- C.
Quality assurance
- D.
Impoundment official
Correct Answer
D. Impoundment official -
- 12.
(003) Who is responsible for ensuring only authorized personnel have access to impounded aircraft or equipment?
- A.
Aircraft crew chief
- B.
Production superintendent
- C.
Quality assurance
- D.
Impoundment official
Correct Answer
D. Impoundment official -
- 13.
(007) Within how many days must a trainee retest after a failed CE?
- A.
30 Days
- B.
90 Days
- C.
60 Days
- D.
45 Days
Correct Answer
B. 90 Days -
- 14.
(007) Within how many days must a trainee retest after a failed CE?
- A.
30 Days
- B.
90 Days
- C.
60 Days
- D.
45 Days
Correct Answer
B. 90 Days -
- 15.
(005) What document informs you, the weapons expediter, of the aircraft scheduled for training?
- A.
Flying schedule
- B.
Dispatch control log
- C.
AF IMT 2430
- D.
AF IMT 2407
Correct Answer
A. Flying schedule -
- 16.
(005) What document informs you, the weapons expediter, of the aircraft scheduled for training?
- A.
Flying schedule
- B.
Dispatch control log
- C.
AF IMT 2430
- D.
AF IMT 2407
Correct Answer
A. Flying schedule -
- 17.
(005) What form is used to track munitions expenditures?
- A.
AF IMT 2430
- B.
AF IMT 2434
- C.
Munitions Control Log
- D.
Expenditures Tracking List
Correct Answer
B. AF IMT 2434 -
- 18.
(005) What form is used to track munitions expenditures?
- A.
AF IMT 2430
- B.
AF IMT 2434
- C.
Munitions Control Log
- D.
Expenditures Tracking List
Correct Answer
B. AF IMT 2434 -
- 19.
(006) What form provides a permanent history of significant maintenance actions?
- A.
AFTO Form 244
- B.
Automated maintenance action form
- C.
AFTO IMT 95
- D.
TCTO
Correct Answer
C. AFTO IMT 95 -
- 20.
(004) What aircraft maintenance action requires a concurrent servicing supervisor (CSS)?
- A.
Aircraft fueling
- B.
Aircraft towing
- C.
Oxygen servicing
- D.
Munitions loading/downloading
Correct Answer
A. Aircraft fueling -
- 21.
(006) What form provides a permanent history of significant maintenance actions?
- A.
AFTO Form 244
- B.
Automated maintenance action form
- C.
AFTO IMT 95
- D.
TCTO
Correct Answer
C. AFTO IMT 95 -
- 22.
(004) Who may authorize a fighter unit to conduct dual loading operations (DLO)?
- A.
Maintenance group commander
- B.
Major command (MAJCOM)
- C.
Wing weapons safety
- D.
Wing weapons manager
Correct Answer
B. Major command (MAJCOM) -
- 23.
(004) What aircraft maintenance action requires a concurrent servicing supervisor (CSS)?
- A.
Aircraft fueling
- B.
Aircraft towing
- C.
Oxygen servicing
- D.
Munitions loading/downloading
Correct Answer
A. Aircraft fueling -
- 24.
(004) What constitutes the recurring annual training requirement for dual loading operations(DLO)?
- A.
A proficiency load only
- B.
Academic and practical load training
- C.
Academic training, written test, and a proficiency load
- D.
Academic training only
Correct Answer
D. Academic training only -
- 25.
(004) Who may authorize a fighter unit to conduct dual loading operations (DLO)?
- A.
Maintenance group commander
- B.
Major command (MAJCOM)
- C.
Wing weapons safety
- D.
Wing weapons manager
Correct Answer
B. Major command (MAJCOM) -
- 26.
(005) What is the primary form used to list all jobs to be completed and the technicians performing the work?
- A.
AF IMT 2407
- B.
AF IMT 2434
- C.
AF IMT 2430
- D.
AF IMT 2401
Correct Answer
C. AF IMT 2430 -
- 27.
(004) What constitutes the recurring annual training requirement for dual loading operations(DLO)?
- A.
A proficiency load only
- B.
Academic and practical load training
- C.
Academic training, written test, and a proficiency load
- D.
Academic training only
Correct Answer
D. Academic training only -
- 28.
(005) Who is the approval authority for locally produced versions of the AF IMT 2430?
- A.
Wing weapons manager
- B.
Squadron commander
- C.
Maintenance group commander
- D.
Weapons section NCOIC
Correct Answer
A. Wing weapons manager -
- 29.
(005) What is the primary form used to list all jobs to be completed and the technicians performing the work?
- A.
AF IMT 2407
- B.
AF IMT 2434
- C.
AF IMT 2430
- D.
AF IMT 2401
Correct Answer
C. AF IMT 2430 -
- 30.
(005) What form is used for tracking the configuration of aircraft, along with tracking all munitions expenditures?
- A.
AF IMT 2401
- B.
AF IMT 2407
- C.
AF IMT 2430
- D.
AF IMT 2434
Correct Answer
D. AF IMT 2434 -
- 31.
(005) Who is the approval authority for locally produced versions of the AF IMT 2430?
- A.
Wing weapons manager
- B.
Squadron commander
- C.
Maintenance group commander
- D.
Weapons section NCOIC
Correct Answer
A. Wing weapons manager -
- 32.
(005) After munitions reconciliation is completed all expenditure documents are distributed to what agency?
- A.
Weapons system data base manager
- B.
Weapons standardization section
- C.
Munitions flight munitions management and distribution section
- D.
Munitions flight and plans and scheduling
Correct Answer
D. Munitions flight and plans and scheduling -
- 33.
(005) What form is used for tracking the configuration of aircraft, along with tracking all munitions expenditures?
- A.
AF IMT 2401
- B.
AF IMT 2407
- C.
AF IMT 2430
- D.
AF IMT 2434
Correct Answer
D. AF IMT 2434 -
- 34.
(005) After munitions reconciliation is completed all expenditure documents are distributed to what agency?
- A.
Weapons system data base manager
- B.
Weapons standardization section
- C.
Munitions flight munitions management and distribution section
- D.
Munitions flight and plans and scheduling
Correct Answer
D. Munitions flight and plans and scheduling -
- 35.
(005) What records keeping function is performed after an aircraft is removed from cannibalization status (CANN)?
- A.
Data integrity team (DIT) forms review
- B.
Expediter forms review
- C.
Aircraft document review (ADR)
- D.
Quality assurance records review (QARR)
Correct Answer
C. Aircraft document review (ADR) -
- 36.
(005) What records keeping function is performed after an aircraft is removed from cannibalization status (CANN)?
- A.
Data integrity team (DIT) forms review
- B.
Expediter forms review
- C.
Aircraft document review (ADR)
- D.
Quality assurance records review (QARR)
Correct Answer
C. Aircraft document review (ADR) -
- 37.
(007) Within how many days after notification of test arrival must the trainee test?
- A.
30 days
- B.
45 days
- C.
15 days
- D.
10 days
Correct Answer
A. 30 days -
- 38.
(007) Within how many days after notification of test arrival must the trainee test?
- A.
30 days
- B.
45 days
- C.
15 days
- D.
10 days
Correct Answer
A. 30 days -
- 39.
(007) Within how many days from initial notification of the trainee’s failure must the unit commander with help from the unit training manager or base training manager, interview the supervisor and trainee to determine the reason for the failure and take corrective action?
- A.
15 days
- B.
30 days
- C.
45 days
- D.
60 days
Correct Answer
B. 30 days -
- 40.
(007) Within how many days from initial notification of the trainee’s failure must the unit commander with help from the unit training manager or base training manager, interview the supervisor and trainee to determine the reason for the failure and take corrective action?
- A.
15 days
- B.
30 days
- C.
45 days
- D.
60 days
Correct Answer
B. 30 days -
- 41.
(009) What is the isochronal inspection concept?
- A.
Constructed to allow time for an inspection to be performed
- B.
Establishes maintenance and engineering requirements
- C.
Designed to translate flying hour utilization rates into calendar periods
- D.
Designed to translate the inspection concept
Correct Answer
C. Designed to translate flying hour utilization rates into calendar periods -
- 42.
(009) What is the isochronal inspection concept?
- A.
Constructed to allow time for an inspection to be performed
- B.
Establishes maintenance and engineering requirements
- C.
Designed to translate flying hour utilization rates into calendar periods
- D.
Designed to translate the inspection concept
Correct Answer
C. Designed to translate flying hour utilization rates into calendar periods -
- 43.
(009) What is the primary objective of the phased inspection concept?
- A.
BPO
- B.
To mimize the length of time an aircraft is out of commission for any given scheduled inspection
- C.
To minimize the length of time an aircraft is due basic postflight
- D.
Normal scheduling of phase packages
Correct Answer
B. To mimize the length of time an aircraft is out of commission for any given scheduled inspection -
- 44.
(009) What is the primary objective of the phased inspection concept?
- A.
BPO
- B.
To mimize the length of time an aircraft is out of commission for any given scheduled inspection
- C.
To minimize the length of time an aircraft is due basic postflight
- D.
Normal scheduling of phase packages
Correct Answer
B. To mimize the length of time an aircraft is out of commission for any given scheduled inspection -
- 45.
(009) What TO lists the types of inspections?
- A.
-6 TO
- B.
TO 00-20-1
- C.
21-101
- D.
Policies and Procedures
Correct Answer
B. TO 00-20-1 -
- 46.
(009) What TO lists the types of inspections?
- A.
-6 TO
- B.
TO 00-20-1
- C.
21-101
- D.
Policies and Procedures
Correct Answer
B. TO 00-20-1 -
- 47.
(009) What is PDM?
- A.
Depot maintenace inspection manager
- B.
An inspection requiring a flightline evaluation
- C.
Postflight Depot Maintenance Evaluation process
- D.
An inspection requiring skills, equipment, or facilities not normally possessed by operating locations
Correct Answer
D. An inspection requiring skills, equipment, or facilities not normally possessed by operating locations -
- 48.
(009) What is PDM?
- A.
Depot maintenace inspection manager
- B.
An inspection requiring a flightline evaluation
- C.
Postflight Depot Maintenance Evaluation process
- D.
An inspection requiring skills, equipment, or facilities not normally possessed by operating locations
Correct Answer
D. An inspection requiring skills, equipment, or facilities not normally possessed by operating locations -
- 49.
(010) What office is normally OPR for IPI implementation?
- A.
Quality assurance
- B.
Armament shop
- C.
NDI
- D.
Maintenance section
Correct Answer
A. Quality assurance -
- 50.
(010) What office is normally OPR for IPI implementation?
- A.
Quality assurance
- B.
Armament shop
- C.
NDI
- D.
Maintenance section
Correct Answer
A. Quality assurance -
Quiz Review Timeline +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Jan 10, 2013Quiz Edited by
ProProfs Editorial Team -
Mar 11, 2010Quiz Created by
Bkelley79
- ACA Quizzes
- ACCA Quizzes
- ACE Quizzes
- BCBA Quizzes
- CCP Quizzes
- CDCs Quizzes
- CEH Quizzes
- CISA Quizzes
- CISCO Quizzes
- CISSP Quizzes
- CompTIA Quizzes
- CPA Quizzes
- CPAT Quizzes
- CPFA Quizzes
- CPP Quizzes
- CPT Quizzes
- CSA Quizzes
- CSET Quizzes
- CST Quizzes
- CSWIP Quizzes
- FTCE Quizzes
- HIPAA Quizzes
- IAHCSMM Quizzes
- ISTQB Quizzes
- LEED Ga Quizzes
- MBLEx Quizzes
- TEAS Quizzes
Back to top