2W171 CDC

28 Questions | By Zedpez | Updated: Feb 14, 2013 | Attempts: 165

Questions

Settings

Feedback

During the Quiz End of Quiz

Play as

Quiz Flashcard

Create your own Quiz

Questions and Answers

1.

What repair cycle items must you return to depot for condemnation?
- A.
  
  Depot recoverable (XD)
- B.
  
  Field repairable (XF)
- C.
  
  Nonexpendable intermediate (NF)
- D.
  
  Expendable user (XB)
Correct Answer
A. Depot recoverable (XD)
2.

What form is published as a continuation form for Part 5 of the AFTO Form 244, Industrial/Support Equipment Record?
- A.
  
  AFTO Form 245
- B.
  
  AFTO Form 244A
- C.
  
  AFTO Form 244 continuation sheet
- D.
  
  AFTO Form 244 part V continuation sheet
Correct Answer
A. AFTO Form 245
3.

What document is sent to the gaining unit when transferring equipment such as missile launcher, bomb racks, adn suspension utility units?
- A.
  
  Complete record of logbook entries
- B.
  
  AFTO IMT 75 or automated 75
- C.
  
  AFTO IMT 95 or automated 95
- D.
  
  IMDS detailed item history report
Correct Answer
C. AFTO IMT 95 or automated 95
4.

Which items require an AFTO form 244?
- A.
  
  Items coded XB3
- B.
  
  Serially controlled items
- C.
  
  Items appearing on the custody account
- D.
  
  Items that require periodic serviceability testing
Correct Answer
D. Items that require periodic serviceability testing
5.

What info is located in section III of the AF Form 623?
- A.
  
  Trainee id data
- B.
  
  Documented items related to trainee's training
- C.
  
  The career field education and training plan (CFETP)
- D.
  
  A list of all completed formal training courses and completion dates
Correct Answer
D. A list of all completed formal training courses and completion dates
6.

Who must sign and date all entries in the AF INT 623a?
- A.
  
  Supervisor or trainer only
- B.
  
  Supervisor and/or trainer and trainee
- C.
  
  Weapons section NCOIC and Supervisor only
- D.
  
  Commander or Supervisor and/or trainer only
Correct Answer
B. Supervisor and/or trainer and trainee
7.

What pub describes an Air Force specialty in terms of tasks and knowledge that an airman may be expected to preform or to know on the job?
- A.
  
  Airman specialty knowledge skills system
- B.
  
  Career field education and training plan
- C.
  
  Specialty training standard
- D.
  
  Course syllabus
Correct Answer
C. Specialty training standard
8.

Who reviews the graduate assessment survey (GAS) to make sure the response is directed towards technical training rather than the trainee's personality traits?
- A.
  
  Wing weapons manager or equivalent
- B.
  
  Weapons section NCOIC or equivalent
- C.
  
  Squadron training manager or equivalent
- D.
  
  Wing maintenance training manager or equivalent
Correct Answer
A. Wing weapons manager or equivalent
9.

Within how many days must unit training monitor (UTM) ensure trainees are enrolled in required CDCs?
- A.
  
  15 days of in processing (within 30 days for overseas units)
- B.
  
  30 days of in processing (within 45 days for overseas units)
- C.
  
  45 days of in processing (within 60 days for overseas units)
- D.
  
  60 days of in processing (within 90 days for overseas units)
Correct Answer
C. 45 days of in processing (within 60 days for overseas units)
10.

What level of maintenance is primarily concerned with testing and repair or replacement of component parts, line replaceable units, and alternate mission equipment (AME)?
- A.
  
  Organizational
- B.
  
  Intermediate
- C.
  
  Operational
- D.
  
  Functional
Correct Answer
B. Intermediate
11.

Who is responsible for ensuring the isochronal inspection calendar periods are properly established to meet maintenance and engineering requirements?
- A.
  
  MAJCOM functional manager
- B.
  
  System program manager
- C.
  
  Plan and scheduling
- D.
  
  QA
Correct Answer
B. System program manager
12.

What inspection system is used to inspect individual areas, components, and systems to a degree beyond the scheduled inspection and maintance requirements listed in the -6?
- A.
  
  Periodic
- B.
  
  Phased
- C.
  
  Isochronal
- D.
  
  Programmed depot maintenance
Correct Answer
D. Programmed depot maintenance
13.

What inspection must be accomplished after each flight when a turnaround sortie is scheduled?
- A.
  
  Postload
- B.
  
  Thruflight
- C.
  
  End-of-runway
- D.
  
  Basic postflight
Correct Answer
B. Thruflight
14.

What inspection is completed after the last flight of a specified flying period?
- A.
  
  Postload
- B.
  
  Thruflight
- C.
  
  End-of-runway
- D.
  
  Basic postflight
Correct Answer
D. Basic postflight
15.

What inspection includes end-of -firing day inspections on aircraft weapons stations that have expended munitions and/or aircraft systems?
- A.
  
  Postload
- B.
  
  Thruflight
- C.
  
  End-of-runway
- D.
  
  Basic postflight
Correct Answer
D. Basic postflight
16.

What inspection is an integral part of any loading operation?
- A.
  
  Postload
- B.
  
  Thruflight
- C.
  
  End-of-runway
- D.
  
  Basic postflight
Correct Answer
A. Postload
17.

Who establishes the guidelines for the in-process inspection?
- A.
  
  Wing commander
- B.
  
  Wing safety personnel
- C.
  
  QA
- D.
  
  MAJCOM
Correct Answer
D. MAJCOM
18.

What technical order (TO) lists all assets authorized to an aircraft?
- A.
  
  -6
- B.
  
  -06M
- C.
  
  -21
- D.
  
  -33
Correct Answer
C. -21
19.

Who id's items that are managed and controlled as equipment?
- A.
  
  The user
- B.
  
  Defense logistic agency
- C.
  
  QA personnel and wing commander
- D.
  
  MAJCOM air force materiel command
Correct Answer
D. MAJCOM air force materiel command
20.

What is the official document listing accountable items, used in an organization?
- A.
  
  Budget request
- B.
  
  Allowance standard
- C.
  
  Custody authorization/custody receipt listing
- D.
  
  DOD form 1348-1
Correct Answer
C. Custody authorization/custody receipt listing
21.

What section of supply handles AF IMT 601 requests for items on your units allowance standards?
- A.
  
  Equipment management section
- B.
  
  Custody custodian customer support section
- C.
  
  Non-expendable equipment accounts section
- D.
  
  Non-expendable equipment accounts management section
Correct Answer
A. Equipment management section
22.

Where are repair cycle parts with an expendability, recoverability, reparability code (EERC) of "XF" repaired or condemned?
- A.
  
  Depot
- B.
  
  Local level
- C.
  
  Manufacturer
- D.
  
  MAJCOM
Correct Answer
C. Manufacturer
23.

What does the 2 designate in the expendability, recoverability, reparability cost designator (ERRCD) "XD2"?
- A.
  
  Expendable
- B.
  
  Reparability
- C.
  
  Cost category
- D.
  
  Depot funded
Correct Answer
C. Cost category
24.

What computer-generated detail is used at base level by both supply and the maintenance activites to keep track of repair cycle assets?
- A.
  
  Not repairable this station (NRTS)
- B.
  
  Due-in-for-maintenance (DIFM)
- C.
  
  Work center event
- D.
  
  End-item report
Correct Answer
B. Due-in-for-maintenance (DIFM)
25.

What Air Force TO form do you fill out to provide the repair shop information concerning a broken item?
- A.
  
  1574
- B.
  
  1348-2
- C.
  
  1348-1
- D.
  
  350
Correct Answer
D. 350
26.

What system is assigned to repairable items to tell base supply where to ship a repairable item?
- A.
  
  Due-in for maintenance(DIFM)
- B.
  
  Not repairable this station (NRTS)
- C.
  
  Repair item movement control system (RIMCS)
- D.
  
  Expendability, recoverability, reparability category (ERRC)
Correct Answer
C. Repair item movement control system (RIMCS)
27.

What form is submitted on support equipment to identify obsolete equipment and the estimated age when, because of wear and tear, it is considered not feasible to repair?
- A.
  
  AFTO Form 22
- B.
  
  AFTO Form 95
- C.
  
  AFTO Form 245
- D.
  
  AFTO Form 375
Correct Answer
D. AFTO Form 375
28.

What form is used for material determined, through physical inspection, tear down, or engineering decision to be inserviceable and uneconomically reparable, but the item contains serviceable components or assemblies to be reclaimed?
- A.
  
  DD Form 1574
- B.
  
  DD Form 1574-2
- C.
  
  DD Form 1577
- D.
  
  DD Form 1577-2
Correct Answer
C. DD Form 1577

Quiz Review Timeline +

Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.

Current Version
Feb 14, 2013

Quiz Edited by
ProProfs Editorial Team
Mar 15, 2012

Quiz Created by
Zedpez

2w171 CDC

What repair cycle items must you return to depot for condemnation?

What form is published as a continuation form for Part 5 of the AFTO Form 244, Industrial/Support Equipment Record?

What document is sent to the gaining unit when transferring equipment such as missile launcher, bomb racks, adn suspension utility units?

Which items require an AFTO form 244?

What info is located in section III of the AF Form 623?

Who must sign and date all entries in the AF INT 623a?

What pub describes an Air Force specialty in terms of tasks and knowledge that an airman may be expected to preform or to know on the job?

Who reviews the graduate assessment survey (GAS) to make sure the response is directed towards technical training rather than the trainee's personality traits?

Within how many days must unit training monitor (UTM) ensure trainees are enrolled in required CDCs?

What level of maintenance is primarily concerned with testing and repair or replacement of component parts, line replaceable units, and alternate mission equipment (AME)?

Who is responsible for ensuring the isochronal inspection calendar periods are properly established to meet maintenance and engineering requirements?

What inspection system is used to inspect individual areas, components, and systems to a degree beyond the scheduled inspection and maintance requirements listed in the -6?

What inspection must be accomplished after each flight when a turnaround sortie is scheduled?

What inspection is completed after the last flight of a specified flying period?

What inspection includes end-of -firing day inspections on aircraft weapons stations that have expended munitions and/or aircraft systems?

What inspection is an integral part of any loading operation?

Who establishes the guidelines for the in-process inspection?

What technical order (TO) lists all assets authorized to an aircraft?

Who id's items that are managed and controlled as equipment?

What is the official document listing accountable items, used in an organization?

What section of supply handles AF IMT 601 requests for items on your units allowance standards?

Where are repair cycle parts with an expendability, recoverability, reparability code (EERC) of "XF" repaired or condemned?

What does the 2 designate in the expendability, recoverability, reparability cost designator (ERRCD) "XD2"?

What computer-generated detail is used at base level by both supply and the maintenance activites to keep track of repair cycle assets?

What Air Force TO form do you fill out to provide the repair shop information concerning a broken item?

What system is assigned to repairable items to tell base supply where to ship a repairable item?

What form is submitted on support equipment to identify obsolete equipment and the estimated age when, because of wear and tear, it is considered not feasible to repair?

What form is used for material determined, through physical inspection, tear down, or engineering decision to be inserviceable and uneconomically reparable, but the item contains serviceable components or assemblies to be reclaimed?