2w051a Vol.2 Ure Questions I.Y.A.A.Y.A.S
2W051A Vol. 2 URE Questions I. Y. A. A. Y. A. S
Questions and Answers
- 1.
Which munitions element acts as the focal point for daily reconciliation of munitions expenditures and tracking missile flying hours ?
- A.
Line delivery
- B.
Munitions control
- C.
Munitions storage
- D.
Munitions inspection
Correct Answer
B. Munitions controlExplanation
Munitions control is the correct answer because it acts as the focal point for daily reconciliation of munitions expenditures and tracking missile flying hours. This means that it is responsible for keeping track of how much money is being spent on munitions and monitoring the amount of time that missiles are in flight. It plays a crucial role in ensuring that resources are being used efficiently and effectively.Rate this question:
-
- 2.
The initial goal of a base recall is to
- A.
Prepare for war
- B.
Show unit effectiveness
- C.
Account for all personnel
- D.
Bring one squadron back to work for the day
Correct Answer
C. Account for all personnelExplanation
The initial goal of a base recall is to account for all personnel. This means ensuring that every individual who is supposed to be present at the base is actually accounted for and present. This is important for various reasons such as safety, security, and operational readiness. By conducting a base recall, the authorities can confirm that no personnel are missing or unaccounted for, allowing them to proceed with any necessary actions or operations with confidence.Rate this question:
-
- 3.
Emergency action checklists provide what type of information ?
- A.
List of squadron personnel to include name, phone number, and home address
- B.
Step-by step procedures to be followed when an emergency situation occurs
- C.
List the different duty sections of Security Forces
- D.
Detailed information about installation security
Correct Answer
B. Step-by step procedures to be followed when an emergency situation occursExplanation
Emergency action checklists provide step-by-step procedures to be followed when an emergency situation occurs. This type of information is crucial in order to ensure that the appropriate actions are taken quickly and efficiently during an emergency. It helps to guide individuals on what needs to be done, who needs to be contacted, and what resources are available to handle the situation effectively.Rate this question:
-
- 4.
Which agency would you coordinate matters concerning risk category changes in munitions storage structures ?
- A.
Base safety office
- B.
Central security control
- C.
Explosive ordnance disposal
- D.
Maintenance operations center
Correct Answer
B. Central security controlExplanation
Central security control would be the agency responsible for coordinating matters concerning risk category changes in munitions storage structures. This is because central security control is typically responsible for overseeing and managing security measures and protocols, including those related to the storage of munitions. They would have the authority and knowledge to assess and coordinate any necessary changes in risk categorization for these structures.Rate this question:
-
- 5.
Which agency must be notified of fire and hazard symbol changes to munitions storage magazines ?
- A.
Fire department
- B.
Security forces
- C.
Base safety office
- D.
Explosive ordinance disposal
Correct Answer
A. Fire departmentExplanation
The fire department must be notified of fire and hazard symbol changes to munitions storage magazines. This is because the fire department is responsible for handling and responding to fire emergencies. They need to be aware of any changes in symbols or markings on the storage magazines to ensure they are prepared to handle any potential fire hazards or incidents. By notifying the fire department, they can stay updated and take appropriate measures to mitigate any risks associated with the storage of munitions.Rate this question:
-
- 6.
If an accident or incident involving explosives occurs within the munitions storage area, which agency would be called to safe the muntitions ?
- A.
Base safety office
- B.
Base fire department
- C.
Explosive ordnance disposal
- D.
Maintenance operation center
Correct Answer
C. Explosive ordnance disposalExplanation
If an accident or incident involving explosives occurs within the munitions storage area, the agency that would be called to safe the munitions is the Explosive Ordnance Disposal (EOD). EOD teams are specially trained to handle and dispose of explosive materials safely. They have the expertise and equipment necessary to assess the situation, neutralize any potential threats, and ensure the safe handling and disposal of the explosives. The Base Safety Office may be involved in coordinating the response, but the primary responsibility for dealing with the explosives lies with the EOD.Rate this question:
-
- 7.
All explosive mishap and Dull Sword reporting is coordinated through which office ?
- A.
Maintenance operation center
- B.
Base safety office
- C.
Security forces
- D.
Transportation
Correct Answer
B. Base safety officeExplanation
The correct answer is the Base safety office. The Base safety office is responsible for coordinating all explosive mishap and Dull Sword reporting. They ensure that any incidents related to explosives or dull swords are properly reported and addressed. This office plays a crucial role in maintaining the safety and security of the base by overseeing and managing these types of incidents.Rate this question:
-
- 8.
What can be used to make the door of the munitions control facility ?
- A.
A solid wood door with a peep hole
- B.
A solid wood door without a peephole
- C.
A hollow wood door with a peep hole
- D.
A hollow wood door without a peep hole
Correct Answer
A. A solid wood door with a peep holeExplanation
A solid wood door with a peep hole would be the best choice for the door of a munitions control facility because it provides both security and visibility. A solid wood door would be sturdy and resistant to forced entry, while the peep hole would allow authorized personnel to see who is outside before opening the door. This combination ensures the facility remains secure while still allowing for controlled access.Rate this question:
-
- 9.
How many keys are received from the manufacturer with high/medium security locks and cylinders ?
- A.
One
- B.
Two
- C.
Three
- D.
Four
Correct Answer
C. ThreeExplanation
Three keys are received from the manufacturer with high/medium security locks and cylinders.Rate this question:
-
- 10.
What specific purpose is the high/medium security lock control key used for ?
- A.
Maintenance
- B.
Primary issue
- C.
Secondary issue
- D.
Normal operation
Correct Answer
A. MaintenanceExplanation
The high/medium security lock control key is used for maintenance purposes. This key allows authorized personnel to access and perform maintenance tasks on high or medium security locks, such as rekeying, repairing, or replacing the lock. It is not used for normal operation or addressing primary or secondary issues that may arise.Rate this question:
-
- 11.
What form is used to document the issue and receipt of keys to munitions maintenance and storage facilities ?
- A.
AF IMT 2432, Key issue log
- B.
AF IMT 4331 Munitions Transaction Sheet
- C.
AF IMT 68 Munitions Authorization Record
- D.
AF IMT 2427, Lock and Key Control Register
Correct Answer
A. AF IMT 2432, Key issue logExplanation
The correct answer is AF IMT 2432, Key issue log. This form is used to document the issue and receipt of keys to munitions maintenance and storage facilities. It serves as a log to keep track of who has been issued keys and when they were returned.Rate this question:
-
- 12.
If primary, spare, and control keys to munication storage areas are issued, when must a key inventory be performed ?
- A.
Weekly
- B.
Monthly
- C.
At the end of each shift
- D.
At the beginning of each shift
Correct Answer
C. At the end of each shiftExplanation
A key inventory must be performed at the end of each shift if primary, spare, and control keys to communication storage areas are issued. This is necessary to ensure that all keys are accounted for and properly secured. Performing a key inventory at the end of each shift helps to prevent any unauthorized access to communication storage areas and ensures that the keys are available for the next shift. It also allows for any missing or misplaced keys to be identified and addressed promptly.Rate this question:
-
- 13.
In accordance with the Department of Defense (DOD) 5100.76-M, you should audit keys, locks, and cylinders
- A.
Monthly
- B.
Annually
- C.
Bimonthly
- D.
Semi-Annually
Correct Answer
D. Semi-AnnuallyExplanation
According to the Department of Defense (DOD) 5100.76-M, it is recommended to audit keys, locks, and cylinders semi-annually. This means that the auditing process should be conducted twice a year. This frequency allows for regular checks and ensures that any issues or discrepancies with keys, locks, or cylinders are identified and addressed in a timely manner. By conducting audits semi-annually, the DOD aims to maintain the security and integrity of its key, lock, and cylinder systems.Rate this question:
-
- 14.
How often must you rotate or replace high security locks securing classified munitions ?
- A.
Monthly
- B.
Annually
- C.
Bimonthly
- D.
Semi-Annually
Correct Answer
B. AnnuallyExplanation
High security locks securing classified munitions need to be rotated or replaced annually. This ensures that the locks remain effective and reliable in protecting the classified munitions. Regular rotation or replacement helps to prevent any potential vulnerabilities or wear and tear that may compromise the security of the locks. By doing this annually, the locks can be properly maintained and updated to meet the necessary security standards.Rate this question:
-
- 15.
Why is an awaiting maintenance (AWM) work order generated ?
- A.
Maintenance has been completed
- B.
Parts are not available to complete the task
- C.
To put the job on hold until the next duty day
- D.
Time, equipment, and personnel are not available to complete the task
Correct Answer
D. Time, equipment, and personnel are not available to complete the taskExplanation
An awaiting maintenance (AWM) work order is generated when there is a lack of time, equipment, and personnel available to complete a task. This means that the necessary resources to carry out the maintenance work are currently unavailable, leading to the need for an AWM work order. This allows the task to be put on hold until the required resources become available, ensuring that the maintenance work can be completed effectively and efficiently.Rate this question:
-
- 16.
When is an item put in awaiting parts (AWO) status ?
- A.
When the allotted time has run out
- B.
When the equipment is not available
- C.
When the required personnel are not available
- D.
When the required parts to do the maintenance are on order
Correct Answer
D. When the required parts to do the maintenance are on orderExplanation
AWO status is typically used when the required parts to perform maintenance on an item are on order. This means that the item cannot be repaired or serviced until the necessary parts arrive. It is a way to track and manage items that are awaiting the arrival of parts before they can be worked on.Rate this question:
-
- 17.
The weekly munitions maintenance schedule is based on what ?
- A.
Monthly munitions maintenance plan, weekly flying and maintenance schedule
- B.
Weekly flying and maintenance schedule and aircrew training requirements
- C.
Monthly munitions maintenance plan and aircrew training requirements only
- D.
Monthly munitions maintenance plan, aircrew training requirements, and support requirements
Correct Answer
D. Monthly munitions maintenance plan, aircrew training requirements, and support requirementsExplanation
The correct answer is Monthly munitions maintenance plan, aircrew training requirements, and support requirements. This is because the weekly munitions maintenance schedule needs to take into account the monthly plan for maintaining the munitions, the training requirements for the aircrew, and the support requirements for the maintenance activities. These factors are crucial in determining the schedule for maintaining the munitions on a weekly basis.Rate this question:
-
- 18.
Who normally presides over the weekly scheduling meeting ?
- A.
Immediate supervisors
- B.
Squadron commander
- C.
Munitions flight chief
- D.
Officer in charge (OIC)
Correct Answer
C. Munitions flight chiefExplanation
The Munitions flight chief is the correct answer because they are responsible for overseeing the scheduling of the weekly meetings. They have the authority and knowledge to ensure that the scheduling process runs smoothly and efficiently. The immediate supervisors may be involved in the meeting, but they do not necessarily preside over it. The squadron commander and Officer in charge (OIC) may have higher-level responsibilities and may not be directly involved in the weekly scheduling meeting.Rate this question:
-
- 19.
Which of the following is not included in the weekly flying schedule ?
- A.
Scheduled takeoff and landing times
- B.
Sortie sequence numbers
- C.
Munitions configurations
- D.
Munitions delivery times
Correct Answer
D. Munitions delivery timesExplanation
The weekly flying schedule includes the scheduled takeoff and landing times, sortie sequence numbers, and munitions configurations. However, munitions delivery times are not included in the schedule. This means that the schedule does not specify the times at which the munitions will be delivered during the week.Rate this question:
-
- 20.
The agency initiating a change to the weekly flying schedule routes the AF IMT 2407 through whom ?
- A.
Weapons expeditor
- B.
Munitions inspection
- C.
Weapons reconciliation
- D.
Affected production superintendent
Correct Answer
D. Affected production superintendentExplanation
The AF IMT 2407 is routed through the affected production superintendent when the agency initiates a change to the weekly flying schedule routes. This implies that the affected production superintendent is responsible for overseeing and managing the production process and ensuring that any changes or updates to the flying schedule are properly communicated and implemented.Rate this question:
-
- 21.
Which computer database is utilized to maintain status and tracking of munitions activities on an installation ?
- A.
Munitions Control 2000 (MC2K)
- B.
Combat Ammunition System (CAS)
- C.
Tactical Munitions Record System (TMRS)
- D.
Integrated Maintenance Data System (IMDS)
Correct Answer
A. Munitions Control 2000 (MC2K)Explanation
Munitions Control 2000 (MC2K) is the correct answer because it is a computer database specifically designed for maintaining the status and tracking of munitions activities on an installation. It is likely used by military personnel to keep track of inventory, storage, transportation, and usage of munitions. The other options, Combat Ammunition System (CAS), Tactical Munitions Record System (TMRS), and Integrated Maintenance Data System (IMDS), may be used for other purposes or may not be as specialized for munitions tracking.Rate this question:
-
- 22.
Which tab of munitions Control 2000 (MC2K) is used to provide fire symbols for each building ?
- A.
Job status
- B.
Facility status
- C.
Missile management
- D.
Net explosive weight
Correct Answer
B. Facility statusExplanation
The correct answer is Facility status. This tab in Munitions Control 2000 (MC2K) is used to provide fire symbols for each building. This suggests that the Facility status tab contains information or indicators related to fire safety or potential fire hazards in buildings. It may provide real-time updates on the status of fire safety measures, such as fire alarms, sprinkler systems, or evacuation plans, for each building in the system.Rate this question:
-
- 23.
Who appoints munitions accountable systems officers (MASO) ?
- A.
Responsible flight chief
- B.
Responsible flight commander
- C.
Responsible squadron commander
- D.
Responsible wing or group commander
Correct Answer
D. Responsible wing or group commanderExplanation
The responsible wing or group commander appoints munitions accountable systems officers (MASO). This individual has the authority to select and assign individuals to this role within their respective wing or group. The MASO is responsible for overseeing and managing the accountability and maintenance of munitions within their unit.Rate this question:
-
- 24.
Generally speaking, "supply discipline" refers to
- A.
Inventory adjustments
- B.
Proper inventory reporting
- C.
Meeting the mission at all costs
- D.
Asset control and documentation
Correct Answer
D. Asset control and documentationExplanation
Supply discipline refers to the practice of effectively managing and controlling assets within an organization. This includes maintaining proper control and documentation of assets to ensure their availability and prevent loss or misuse. By implementing asset control and documentation procedures, organizations can enhance their supply chain management, improve inventory accuracy, and ensure that resources are allocated efficiently to meet the mission requirements.Rate this question:
-
- 25.
What computer database helps the munitions accountable systems officer (MASO) maintain munitions accountability and also provides "real-time visibilty" to higher headquarters ?
- A.
Munitions Control 2000 (MC2K)
- B.
Combat Ammunition System (CAS)
- C.
Integrated Maintenance Data System (IMDS)
- D.
Core Automated Maintenance System (CAMS)
Correct Answer
B. Combat Ammunition System (CAS)Explanation
The Combat Ammunition System (CAS) is the computer database that helps the munitions accountable systems officer (MASO) maintain munitions accountability and also provides "real-time visibility" to higher headquarters. CAS is specifically designed for tracking and managing ammunition inventory, ensuring accurate record-keeping and timely reporting. It allows MASOs to have up-to-date information on the status and location of ammunition, enabling effective decision-making and efficient resource management.Rate this question:
-
- 26.
Which MAJCOM provided document contains the type and quantities of convential munitions to be stocked at your base and indicates those assets stored at other locations for you ?
- A.
Unit committed munitions listing (UCML)
- B.
Theater allocation buy-budget system (TABBS)
- C.
War consumable distribution objective (WCDO)
- D.
Nonnuclear consumables annual analysis (NCAA)
Correct Answer
C. War consumable distribution objective (WCDO)Explanation
The correct answer is War consumable distribution objective (WCDO). The WCDO is a document provided by the MAJCOM that contains the type and quantities of conventional munitions to be stocked at a specific base. It also indicates any assets that are stored at other locations for that base. This document helps in ensuring that the base has the necessary munitions to support its missions and operations.Rate this question:
-
- 27.
What document does the Ammunition Control Point (ACP) use to record the allocation decision ?
- A.
Tactical air missile program (TAMP)
- B.
Detailed logistics allocation report (DLAR)
- C.
Theater allocation buy-budget system (TABBS)
- D.
Nonnuclear consumables annual analysis
Correct Answer
B. Detailed logistics allocation report (DLAR)Explanation
The Ammunition Control Point (ACP) uses the Detailed Logistics Allocation Report (DLAR) to record the allocation decision. The DLAR is a document that provides detailed information about the allocation of logistics resources, including ammunition, to various units or organizations. It includes information such as the quantity and type of ammunition allocated, the unit or organization receiving the allocation, and any special instructions or conditions. The DLAR helps the ACP keep track of the allocation decisions and ensures that the allocated resources are properly recorded and distributed.Rate this question:
-
- 28.
What documents missile requirements and applicable theater allocations ?
- A.
Tactical air missile program (TAMP)
- B.
Detailed logistics allocation report (DLAR)
- C.
Theater allocations buy-budget system (TABBS)
- D.
Nonnuclear consumable annual analysis (NCAA)
Correct Answer
A. Tactical air missile program (TAMP)Explanation
The correct answer is Tactical air missile program (TAMP). TAMP is the document that documents missile requirements and applicable theater allocations. It provides a comprehensive overview of the missile program, including the required resources, budget allocations, and the specific theaters where the missiles will be deployed. This document is crucial in ensuring that the missile program is properly planned and executed, and that the necessary resources are allocated effectively.Rate this question:
-
- 29.
Who is the base war reserve material (WRM) manager ?
- A.
Munitions flight OIC
- B.
Munitions flight chief
- C.
Organizational commander
- D.
Munitions accountable systems officer
Correct Answer
D. Munitions accountable systems officerExplanation
The Munitions accountable systems officer is responsible for managing the base war reserve material (WRM). This role involves overseeing the accountability and maintenance of munitions and ensuring that the base has an adequate supply of WRM. The Munitions accountable systems officer is likely to have the necessary knowledge and expertise to effectively manage the WRM, making them the most suitable candidate for this role.Rate this question:
-
- 30.
Which of the following are standardized, air transportable package of munitions used in support of specific fighter and bomber aircraft systems ?
- A.
Standard tanks, racks, adapters and pylon packages (STRAPP)
- B.
Standard air munitions packages (STAMP)
- C.
Afloat Prepositioned Fleet (APF)
- D.
CONUS stocks
Correct Answer
B. Standard air munitions packages (STAMP)Explanation
Standard air munitions packages (STAMP) are standardized, air transportable packages of munitions used in support of specific fighter and bomber aircraft systems. These packages include tanks, racks, adapters, and pylon packages that are designed to be easily transported and installed on aircraft. STAMP allows for efficient and effective deployment of munitions to support air operations.Rate this question:
-
- 31.
Which of the following are deployable packages of external fuel tanks and jettisonable alternate mission equipment used in support of specific fighter and reconnaissance weapons systems ?
- A.
Standard tanks, racks, adapters, and pylon packages (STRAPP)
- B.
Standard air munitions packages (STAMP)
- C.
Afloat prepositioned fleet (APF)
- D.
CONUS Stocks
Correct Answer
A. Standard tanks, racks, adapters, and pylon packages (STRAPP)Explanation
Standard tanks, racks, adapters, and pylon packages (STRAPP) are deployable packages of external fuel tanks and jettisonable alternate mission equipment used in support of specific fighter and reconnaissance weapons systems. These packages provide additional fuel capacity and allow for the attachment of various mission-specific equipment, such as munitions racks and adapters, to the aircraft's external pylons. This enables the aircraft to carry out extended missions or perform specific tasks as required. The other options mentioned, such as Standard air munitions packages (STAMP), Afloat prepositioned fleet (APF), and CONUS Stocks, do not pertain to the deployment of external fuel tanks and alternate mission equipment.Rate this question:
-
- 32.
What computer database is utilized by munitions personnel to manage forecasts and allocations throughout the Air Force and is accessed through the Combat Ammunition System (CAS) ?
- A.
Munitions Control 200 (MC2K)
- B.
Agile Munitions Support Tool (AMST)
- C.
INtegrated Maintenance Data System (IMDS)
- D.
Core Automated Maintenance System
Correct Answer
B. Agile Munitions Support Tool (AMST)Explanation
The correct answer is Agile Munitions Support Tool (AMST). This computer database is utilized by munitions personnel to manage forecasts and allocations throughout the Air Force. It is accessed through the Combat Ammunition System (CAS).Rate this question:
-
- 33.
What is the primary means of requesting and allocating munitions required for training and operational needs ?
- A.
Annual munitions forecast
- B.
Annual munitions issue request
- C.
Semi-Annual munitions requisition
- D.
Semi-Annual munitions receipt allocation
Correct Answer
A. Annual munitions forecastExplanation
The primary means of requesting and allocating munitions required for training and operational needs is through the annual munitions forecast. This forecast helps in estimating the quantity and types of munitions that will be needed for the upcoming year. It allows for proper planning and budgeting to ensure that the necessary munitions are available when needed. By forecasting the requirements in advance, the organization can make timely requests and allocate resources accordingly. This helps in ensuring a smooth and efficient supply chain for munitions.Rate this question:
-
- 34.
When the munitions forecast is returned to the MAJCOM from the ammunition control point it is called a/an
- A.
Issue
- B.
Allocation
- C.
Requisition
- D.
Requirement
Correct Answer
B. AllocationExplanation
When the munitions forecast is returned to the MAJCOM from the ammunition control point, it is referred to as an "allocation." This means that a specific amount of munitions has been assigned or designated for a particular purpose or use. An allocation ensures that the necessary ammunition is set aside and available for the intended mission or task. It helps in effectively managing and distributing the ammunition resources within the military organization.Rate this question:
-
- 35.
What is the quantity of a munitions item that is expected to be available to the command for the designed fiscal year called ?
- A.
Distribution quantity
- B.
Requirement
- C.
Allocation
- D.
Allotment
Correct Answer
C. AllocationExplanation
Allocation refers to the quantity of a munitions item that is expected to be available to the command for the designed fiscal year. It is the amount that is specifically assigned or allotted to a particular entity or purpose. This term is commonly used in military or logistical contexts to indicate the distribution of resources or supplies to different units or organizations.Rate this question:
-
- 36.
What major category code is used to replace worn-out and damaged items ?
- A.
S
- B.
F
- C.
D
- D.
A
Correct Answer
D. AExplanation
The major category code used to replace worn-out and damaged items is A.Rate this question:
-
- 37.
What major category code is used for training munitions that are not expended during normal training ?
- A.
C
- B.
D
- C.
F
- D.
G
Correct Answer
A. CExplanation
The correct answer is C. The major category code used for training munitions that are not expended during normal training is C. This code is used to identify and classify training munitions that are reusable or not expended during training exercises. It helps in distinguishing them from other categories of munitions and ensures proper inventory management and tracking.Rate this question:
-
- 38.
What major category code is used for items anticipated to be expended ?
- A.
T
- B.
F
- C.
D
- D.
A
Correct Answer
C. DExplanation
The major category code used for items anticipated to be expended is D.Rate this question:
-
- 39.
What is established to control requisitions against an item and to ensure all contingencies and training requirements are supported ?
- A.
Allocations
- B.
Redistribution orders
- C.
Munitions stock levels
- D.
Munitions stock requirements
Correct Answer
C. Munitions stock levelsExplanation
Munitions stock levels are established to control requisitions against an item and to ensure all contingencies and training requirements are supported. By monitoring the stock levels of munitions, organizations can determine when to reorder or redistribute supplies to meet the demands. This helps in maintaining adequate stock levels and avoiding shortages or excess inventory.Rate this question:
-
- 40.
What proram is used to request supplemental allocations and authorize loading them into combat ammunition system (CAS) ?
- A.
Munitions forecast
- B.
Munitions requisition
- C.
Supplemental munitions issue request
- D.
Supplemental allocation authorization request
Correct Answer
D. Supplemental allocation authorization requestExplanation
The correct answer is "Supplemental allocation authorization request." This program is used to request additional allocations of munitions and authorize their loading into the combat ammunition system (CAS). It allows for the allocation of additional resources beyond what was initially forecasted or requisitioned.Rate this question:
-
- 41.
What are supplemental allocations requests called once they are approved ?
- A.
Allocations
- B.
Special levels
- C.
Stock requirements
- D.
Redistribution orders
Correct Answer
B. Special levelsExplanation
Supplemental allocation requests are called "Special levels" once they are approved. This suggests that these requests are treated as unique or exceptional, possibly requiring additional attention or resources. The term "Special levels" implies that these allocations may involve specific criteria or conditions that set them apart from regular allocations.Rate this question:
-
- 42.
How often are time change requirements provided to the munitions accountable systems officer (MASO) ?
- A.
Weekly
- B.
Monthly
- C.
Quarterly
- D.
Semi-annual
Correct Answer
C. QuarterlyExplanation
The time change requirements are provided to the munitions accountable systems officer (MASO) on a quarterly basis. This means that the MASO receives these requirements every three months. This regular schedule allows for timely updates and adjustments to be made to the munitions accountable systems, ensuring that they remain accurate and up to date.Rate this question:
-
- 43.
When can the munitions accountable systems officer (MASO) exceed approved stock levels when ordering items ?
- A.
Never
- B.
Anytime an item is needed
- C.
Anytime an item is needed and is MAJCOM directed
- D.
For quantity per unit pack, or quantity per shipping container conditions
Correct Answer
D. For quantity per unit pack, or quantity per shipping container conditionsExplanation
The munitions accountable systems officer (MASO) can exceed approved stock levels when ordering items if it is necessary to meet the quantity per unit pack or quantity per shipping container conditions. This means that if the required quantity of items cannot be met within the approved stock levels, the MASO is allowed to order additional items to fulfill the packaging or shipping requirements.Rate this question:
-
- 44.
On-hand stock is the amount of items an unit has, plus
- A.
What a unit needs
- B.
The amount on order
- C.
The amount being shipped
- D.
The quantity expended from custody accounts
Correct Answer
B. The amount on orderExplanation
The correct answer is "The amount on order" because on-hand stock refers to the quantity of items that are currently available for use or sale. This includes the items that the unit already has in its possession, as well as the items that have been ordered but have not yet been received. Therefore, the amount on order is a crucial component of the on-hand stock as it represents the items that are expected to be added to the inventory in the near future.Rate this question:
-
- 45.
What is used for requisitioning purposed to offset transportation funding deficits for overseas commands once a year ?
- A.
Receive forward
- B.
Receive back
- C.
Call forward
- D.
Call back
Correct Answer
C. Call forwardExplanation
Call forward is used for requisitioning purposes to offset transportation funding deficits for overseas commands once a year. This means that when there is a shortage of funding for transportation in overseas commands, call forward is used as a means to request additional funds to cover the deficit. It allows the command to request and receive the necessary funds to ensure that transportation needs are met.Rate this question:
-
- 46.
Call forward allows commands to receive some of their requirements in the beginning of a next month
- A.
The new year
- B.
Next month
- C.
The fiscal year
- D.
The calendar year
Correct Answer
C. The fiscal yearExplanation
The correct answer is "The fiscal year" because call forward is a term commonly used in financial and accounting contexts. In this context, the fiscal year refers to a 12-month period used for financial reporting and budgeting purposes by a company or organization. Therefore, call forward allows commands to receive some of their requirements at the beginning of the next fiscal year, ensuring proper financial planning and allocation of resources.Rate this question:
-
- 47.
Initial requirements for which of the following items are not requisitioned because they are automatically distributed to the installation ?
- A.
Training items
- B.
Hard bombs
- C.
Small arms
- D.
Missiles
Correct Answer
D. MissilesExplanation
Missiles are the correct answer because they are automatically distributed to the installation without the need for requisitioning. This implies that there is a system in place for the automatic distribution of missiles, which eliminates the need for manual requisitioning of these items. In contrast, training items, hard bombs, and small arms may require a requisition process before they are distributed to the installation.Rate this question:
-
- 48.
What are war reserve material (WRM) all-up-round missiles with guidance and control units removed called ?
- A.
UNserviceable missiles
- B.
Training missiles
- C.
Component parts
- D.
Stubby missiles
Correct Answer
D. Stubby missilesExplanation
Stubby missiles are war reserve material (WRM) all-up-round missiles with guidance and control units removed. These missiles are no longer usable for their original purpose but can still be used for training or as component parts for other missiles.Rate this question:
-
- 49.
How many calendar days before the next quarter of the calendar year does OCONUS bases submit consolidated requisitions for time change items ?
- A.
30 and 45
- B.
45 and 60
- C.
60 and 90
- D.
90 and 120
Correct Answer
D. 90 and 120Explanation
OCONUS bases submit consolidated requisitions for time change items 90 and 120 calendar days before the next quarter of the calendar year.Rate this question:
-
- 50.
What is considered before the munitions accountable systems officer (MASO) can declare a mission capability (MICAP) condition exists ?
- A.
Check to see if there are any substitute items on hand
- B.
Warehouse facilities are checked to release any out shipments
- C.
Ensure the receiving element has released all items due-out to the organization
- D.
Check accountable records to see if any unserviceable asset can be used until a replacement item arrives on base
Correct Answer
A. Check to see if there are any substitute items on handExplanation
Before the munitions accountable systems officer (MASO) can declare a mission capability (MICAP) condition exists, they need to check if there are any substitute items on hand. This means that they need to verify if there are any alternative items available that can be used in place of the required item. This step is important because if there are substitute items available, it may not be necessary to declare a MICAP condition and wait for a replacement item to arrive.Rate this question:
-
- 1W0510 Quizzes
- 2A552 Quizzes
- 2A651 Quizzes
- 2A652 Quizzes
- 2A654 Quizzes
- 2A656 Quizzes
- 2A671 Quizzes
- 2A672 Quizzes
- 2AX5X Quizzes
- 2AX7X Quizzes
- 2S051 Quizzes
- 2s071 Quizzes
- 2T251 Quizzes
- 3d052 Quizzes
- 3d054 Quizzes
- 3D152 Quizzes
- 3D153 Quizzes
- 3e6x1 Quizzes
- 3P071 Quizzes
- 4a051 Quizzes
- 5j0x1 Quizzes
- Z3D153 Quizzes
- Z3dx7x Quizzes
- Z3p051 Quizzes
Back to top