2s071 Quiz 1
Combination of Volumes 1-3
- 1.
What unit type code (UTC) provides mobility support and when required by the Expeditionary Theater Distribution Center (ETDC) augmentation to the combat supply activity at a main operating base (MOB)/ forward operating site (FOS)/ cooperative security location (CSL)?
- A.
JFBDC- Deploy Computer Operations Support
- B.
JFBMR- Superintendent Materiel Receiving
- C.
JFBCW- Superintendent Mobility Support
- D.
JFBMM- Materiel Control
Correct Answer
C. JFBCW- Superintendent Mobility Support -
- 2.
What unit type code (UTC) monitors the overall maintenance and supply interface and resolves supply support problems.
- A.
JFBDC- Deploy Computer Operations Support
- B.
JFBCW- Superintendent Mobility Support
- C.
JFBSL- Maintenance Supply Liaison
- D.
JFBMM- Materiel Control
Correct Answer
C. JFBSL- Maintenance Supply Liaison -
- 3.
Who serves as the materiel management liaison and equipment accountability authority for wing customers?
- A.
Logistics Readiness Squadron (LRS) Mobility Support
- B.
Customer Support Section
- C.
Squadron Readiness
- D.
Logistics Manager
Correct Answer
B. Customer Support Section -
- 4.
What flight is responsible for the centralized command and control, planning, and execution of all wing deployment operations and the distribution of cargo, passengers, and personal property?
- A.
Squadron superintendent
- B.
Vehicle managment flight
- C.
Materiel Management flight
- D.
Deployment and distribution flight
Correct Answer
D. Deployment and distribution flight -
- 5.
What is the central, process driven initiative designed to ensure the success of the Expeditionary Logistics for the 21st Century (eLog21) campaign?
- A.
Supply Chain Operation (SCO)
- B.
Supply Chain Management (SCM)
- C.
Air Force Materiel Command (AFMC)
- D.
Air Force Global Logistics Support Center (AFGLSC)
Correct Answer
D. Air Force Global Logistics Support Center (AFGLSC) -
- 6.
What Air Force manual (AFMAN) governs Materiel Management?
- A.
36-123, Supply Manual
- B.
23-110, USAF Supply Manual
- C.
36-2108, Enlisted Classification
- D.
23-2308, Material Classification
Correct Answer
B. 23-110, USAF Supply Manual -
- 7.
Which record retrieval code is used to obtain inquiry input on the repair cycle data?
- A.
2
- B.
3
- C.
4
- D.
5
Correct Answer
D. 5 -
- 8.
What is an automated logistics decision support tool which predicts the combat Capabilities of tactical, strategic, and airlift weapon systems for a given set of operations plans, logistics assets, and logistics performance factors?
- A.
Sustainability Assessment Module (SAM)
- B.
Weapon System Management Information System (WSMIS)
- C.
Requirement/ Execution Availability Logistics Module (REALM)
- D.
Execution and Prioritization of Repair Support System (EXPRESS)
Correct Answer
A. Sustainability Assessment Module (SAM) -
- 9.
Which difficulty report (DIREP) category code is assigned when problem stops the computer from processing input, but it does not cause looping or destroy accountable records?
- A.
I
- B.
II
- C.
III
- D.
IV
Correct Answer
B. II -
- 10.
Which is a basic ground rule for conducting a surveillance visit to an accountable officer function?
- A.
Check in and out with the flight chief
- B.
Submit a written report within 15 workdays of the exit briefing
- C.
Follow the standard Air Force directive for conducting such a visit
- D.
Bypass areas that have not had deficiencies within the past three years.
Correct Answer
A. Check in and out with the flight chief -
- 11.
Who is the primary point of contact (POC) for special topics designated by the materiel management officer or Logistics Readiness Squadron (LRS) commander?
- A.
Procedures element
- B.
Customer service
- C.
Computer operations
- D.
Receiving section
Correct Answer
A. Procedures element -
- 12.
A basic ingredient of any analysis program is
- A.
Charts
- B.
Opinions
- C.
A database
- D.
Reliable and valid data
Correct Answer
D. Reliable and valid data -
- 13.
Stockage effectiveness is the basic measure of
- A.
Issue effectiveness
- B.
Supply support to the customer
- C.
Supply support to the contractor
- D.
How often an item was requested
Correct Answer
B. Supply support to the customer -
- 14.
Who must approve the use of credit code "Y" in the materiel management system program control before processing a stock fund turn-in?
- A.
Supply Management Activity Group (SMAG) manager
- B.
Maintenance or supply inspector
- C.
Division SMAG officer
- D.
How often an item was requested
Correct Answer
A. Supply Management Activity Group (SMAG) manager -
- 15.
Where are all suspense files of the Supply Discrepancy Reports (SDR) kept?
- A.
Logistics Readiness Squadron (LRS)
- B.
Stock Control
- C.
Receiving
- D.
Inspection
Correct Answer
B. Stock Control -
- 16.
Who must review the residue portion of the supply interface system end-of-day report to ensure users clear residue images in a timely manner?
- A.
Accountable officer
- B.
Individual flight chiefs
- C.
Procedures and accountability
- D.
Management and system officer
Correct Answer
C. Procedures and accountability -
- 17.
Who may force delete rejects using the reject processor program?
- A.
Accountable officer
- B.
Procedures and accountability
- C.
Management and system officer
- D.
Reject monitors
Correct Answer
D. Reject monitors -
- 18.
What mission capable (MICAP) cause code indicates base decision not to stock the item?
- A.
A
- B.
B
- C.
C
- D.
D
Correct Answer
D. D -
- 19.
What mission capable (MICAP) delete code indicates less-than-full base stock, stock replenishment does not exceed Uniform Materiel Movement and Issue Priority System (UMMIPS) time standards by priority groups, and awaiting part (AWP) assets are on order at time of MICAP?
- A.
X
- B.
T
- C.
S
- D.
R
Correct Answer
B. T -
- 20.
What mission capable (MICAP) delete code indicates request reported in error?
- A.
0
- B.
7
- C.
8
- D.
9
Correct Answer
D. 9 -
- 21.
What listing is used to monitor awaiting part (AWP) end items?
- A.
Q04
- B.
D19
- C.
D20
- D.
D23
Correct Answer
B. D19 -
- 22.
When monitoring awaiting part (AWP) end items, personnel at bases submit requests for repair parts on a fill or back-order basis using the urgency justification code (UJC)
- A.
"AB" only
- B.
"AR" only
- C.
"AA" or "AB"
- D.
"AR" or "BR"
Correct Answer
D. "AR" or "BR" -
- 23.
What are additional warehouses called if they are located within the activities they are supporting?
- A.
Supply Points
- B.
Warehouse
- C.
Storage
- D.
Vault
Correct Answer
A. Supply Points -
- 24.
What Basic Expeditionary Airfield Resources (BEAR) component subsystem set supports 150 personnel in the open-the-base force module?
- A.
B-150
- B.
B-550i
- C.
B-550f
- D.
B-IO
Correct Answer
A. B-150 -
- 25.
How often is Mobility Readiness Spares Package (MRSP) authorization published?
- A.
Semi-annually
- B.
Quarterly
- C.
Monthly
- D.
Annually
Correct Answer
D. Annually -
- 26.
Who may elect to store items requiring functional check in the normal Mobility Readiness Spares Package (MRSP) locations or in a designated functional check holding area?
- A.
War Readiness
- B.
Accountable officer
- C.
Materiel Management superintendent
- D.
Mobility Non Commissioned Officer In Charge (NCOIC)
Correct Answer
B. Accountable officer -
- 27.
Who is responsible for preparing and packaging, inventorying, and maintaining bags?
- A.
Mobility
- B.
Readiness
- C.
War Readiness
- D.
Security Forces
Correct Answer
C. War Readiness -
- 28.
During which phase of the deliberate planning process are support agreements drawn and finalized?
- A.
I
- B.
II
- C.
IV
- D.
V
Correct Answer
D. V -
- 29.
What Department of Defense (DOD) automated reporting system provides National Command Authority (NCA) and Joint Chief of Staff (JCS) with basic unit identity and readiness status?
- A.
ART
- B.
SORTS
- C.
PC-ASM
- D.
WMP-3 Part 2
Correct Answer
B. SORTS -
- 30.
How often does the readiness base level (RBL) system run at AIr Force Materiel Command (AFMC) to push RBLs to both base and depot?
- A.
Daily
- B.
Monthly
- C.
Quarterly
- D.
Semi-annually
Correct Answer
C. Quarterly -
- 31.
What transaction identification code is used to transfer assets to the Defense Reutilization and Marketing Service?
- A.
A2X
- B.
A5J
- C.
TRM
- D.
FTR
Correct Answer
C. TRM -
- 32.
What code identifies equipment items that are accounted for on authorized or in-use details (EAID)?
- A.
Excess exception
- B.
Allowance source
- C.
Shipment exception
- D.
Equipment management codes (EMC)
Correct Answer
D. Equipment management codes (EMC) -
- 33.
Personal at what Air Force Air Logistics Center (ALC) activity maintains a central file of all weapon items by serial number?
- A.
OO-ALC
- B.
SA-ALC
- C.
OC-ALC
- D.
WR-ALC
Correct Answer
D. WR-ALC -
- 34.
What output document reflects the serial numbers for each communication security (COMSEC) transaction?
- A.
D20 Report
- B.
D24 Report
- C.
F114 management notice
- D.
F117 management notice
Correct Answer
D. F117 management notice -
- 35.
Who performs normal inspection functions which include certifying work by the receiving in-checker, changing the stock number, unit of issue, and quantity if required?
- A.
Qualified inspectors
- B.
Inspection section
- C.
Receiving clerk
- D.
Storage and issue personnel
Correct Answer
A. Qualified inspectors -
- 36.
What is the purpose of the AF Form 2032, Inspection Extension?
- A.
Update inspection data
- B.
Identify condemned items
- C.
Identify property turned over to maintenance
- D.
Identify property in stock that has been suspended
Correct Answer
A. Update inspection data -
- 37.
How often are functional check listings run?
- A.
Semiannually
- B.
Annually
- C.
Monthly
- D.
Quarterly
Correct Answer
A. Semiannually -
- 38.
A time-compliance technical order (TCTO) item is identified in the computer by a TCTO flag or by
- A.
Other assets indicator "5"
- B.
Other assets indicator "4"
- C.
Numeric parts preference code (NPPC) "5"
- D.
NPPC "4"
Correct Answer
D. NPPC "4" -
- 39.
The Inspection Offline Checklist (R32) should be processed at least
- A.
Weekly
- B.
Monthly
- C.
Quarterly
- D.
Semiannually
Correct Answer
B. Monthly -
- 40.
Which issue exception (IEX) codes identify health hazard items?
- A.
"3","6", and "M"
- B.
"8","9", and "M"
- C.
"E',"F", and "9"
- D.
"H","G", and "8"
Correct Answer
B. "8","9", and "M" -
- 41.
Which transaction identification code (TRIC) and activity code is used to process an electrostatic sensitive device (ESD) on a detail record to maintenance for testing?
- A.
Issue (ISU), "E"
- B.
MSI, "E"
- C.
ISU "C"
- D.
MSI "C"
Correct Answer
D. MSI "C" -
- 42.
What item storage factor is used when fast-moving items of great demand in locations are easily accessible with as little handling as possible and slow-moving items in less-convenient locations?
- A.
Quantity
- B.
Similarity
- C.
Popularity
- D.
Size and weight
Correct Answer
C. Popularity -
- 43.
Which warehouse aisle can increase the possibility of pilferage in a warehouse?
- A.
Main
- B.
Service
- C.
Working
- D.
Personnel
Correct Answer
D. Personnel -
- 44.
Which method of storage helps to ensure that the oldest items are issued before they become outdated?
- A.
First in, last out
- B.
First in, first out
- C.
Stock by serial number
- D.
Stock using the national stock number (NSN)
Correct Answer
B. First in, first out -
- 45.
As a minimum, how often must the combination on combination padlocks be changed for classified storage?
- A.
Monthly
- B.
Quarterly
- C.
Semiannually
- D.
Annually
Correct Answer
D. Annually -
- 46.
All assigned warehouse locations must be validated at least
- A.
Monthly
- B.
Quarterly
- C.
Semiannually
- D.
Annually
Correct Answer
D. Annually -
- 47.
When controlled items, which are not already specified by an issue exception code (IEX) code, are approved by the unit commander in writing to be placed on bench stock, they are assigned IEX code
- A.
"J"
- B.
"K"
- C.
"M"
- D.
"N"
Correct Answer
D. "N" -
- 48.
When is the S04 run in item number sequence?
- A.
At least annually
- B.
After the M04 is processed
- C.
After each semiannual review
- D.
After items with deviations are added
Correct Answer
C. After each semiannual review -
- 49.
Which option is not an objective of inventory research?
- A.
Account for rejected transactions
- B.
Correct warehouse location errors
- C.
Process requisitions when required
- D.
Reverse-post erroneous transactions
Correct Answer
C. Process requisitions when required -
- 50.
The type account code for an item to be considered for an automatic adjustment is
- A.
"B"
- B.
"D"
- C.
"E"
- D.
"X"
Correct Answer
A. "B" -
Quiz Review Timeline +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Feb 19, 2013Quiz Edited by
ProProfs Editorial Team -
Jul 02, 2012Quiz Created by
Jannette.eriksen
- 1W0510 Quizzes
- 2A251 Quizzes
- 2A552 Quizzes
- 2A652 Quizzes
- 2A656 Quizzes
- 2A671 Quizzes
- 2A672 Quizzes
- 2A6X1 Quizzes
- 2A753 Quizzes
- 2A852 Quizzes
- 2AX5X Quizzes
- 2AX7X Quizzes
- 2T251 Quizzes
- 3d052 Quizzes
- 3D151 Quizzes
- 3D152 Quizzes
- 3D153 Quizzes
- 3d1x3 Quizzes
- 3e451 Quizzes
- 3e6x1 Quizzes
- 4a051 Quizzes
- 5j0x1 Quizzes
- Z3D153 Quizzes
- Z3p051 Quizzes
Back to top