2A656 Pretest
Pretest on all 5 volumes of 2A656 CDC's
- 1.
(001) If your tasks include component Repair, engine overhaul, or Structural repair of control Surfaces you are doing what type of maintenance?
- A.
On equipment
- B.
Off equipment
- C.
Flight line
- D.
Organizational
Correct Answer
B. Off equipment -
- 2.
(001) If you work on an aircraft on the flight line, you are doing which level of maintenance?
- A.
Depot
- B.
Intermediate
- C.
Organizational
- D.
Off-equipment
Correct Answer
C. Organizational -
- 3.
(002) Who is responsible for managing the wing's quality assurance programs?
- A.
Flight Chief
- B.
Quality assurance section chief
- C.
Maintenance group commander
- D.
Aircraft maintenance squadron commander
Correct Answer
C. Maintenance group commander -
- 4.
(002) Who is responsible for ensuring compliance with the wing Environmental Protection Agency program?
- A.
Wing commander
- B.
Squadron commander
- C.
Propulsion flight chief
- D.
Maintenance superintendent
Correct Answer
B. Squadron commander -
- 5.
(002) Who is responsible to the squadron commander for maintenance production?
- A.
Maintenance group commander
- B.
Maintenance flight chief
- C.
Maintenance Operations
- D.
Flight chief
Correct Answer
C. Maintenance Operations -
- 6.
(002) Who is responsible to the maintenance supervisor for the leadership, supervision, and training of assigned personnel?
- A.
Shift leader
- B.
Section chief
- C.
Flight commander/chief
- D.
Maintenance superintendent
Correct Answer
C. Flight commander/chief -
- 7.
(003) Which flight is part of a maintenance squadron?
- A.
Test, measurement, and diagnostic equipment
- B.
Maintenance operations and programs
- C.
Quality assurance
- D.
Resources
Correct Answer
A. Test, measurement, and diagnostic equipment -
- 8.
(003) Quality maintenance is the responsibility of maintenance technicians, supervisors, and commanders who work in concert with
- A.
Maintenance training
- B.
Quality assurance
- C.
Resources
- D.
Egress
Correct Answer
B. Quality assurance -
- 9.
(004) The Integrated Maintenance Data System (IMDS) Training Management Subsystem can be used to monitor
- A.
Upgrade training
- B.
Optional training
- C.
Seasonal training
- D.
Qualitative training
Correct Answer
A. Upgrade training -
- 10.
(005) Which is the correct method for writing 30 January 2011?
- A.
20110130
- B.
01/30/11
- C.
30/01/11
- D.
11/01/30
Correct Answer
A. 20110130 -
- 11.
(005) A symbol entered on a maintenance form reflects the opinion of the
- A.
Shop supervisor
- B.
Maintenance officer
- C.
Squadron commander
- D.
Individual making the entry
Correct Answer
D. Individual making the entry -
- 12.
(005) When a new Air Force Technical Order (AFTO) Form 781A is initiated, what kind of discrepancies cannot be transferred to the AFTO Form 781K?
- A.
Red X
- B.
Red dash
- C.
Red diagonal
- D.
Discrepancies with a supply document number
Correct Answer
A. Red X -
- 13.
(005) The Air Force Technical Order (AFTO) Form 244 is used to document discrepancies and corrective actions for
- A.
Aircraft
- B.
Batteries
- C.
Equipment
- D.
Multimeters
Correct Answer
C. Equipment -
- 14.
(006) The five authorized inspection concepts used by the Air Force are
- A.
Major, minor, phase, isochronal, postflight
- B.
Major, minor, shop, home station, postflight
- C.
Periodic, home station, postflight, isochronal, programmed depot maintenance
- D.
Periodic, phase, isochronal, programmed depot maintenance, airline/manufacturer maintenance
Correct Answer
D. Periodic, phase, isochronal, programmed depot maintenance, airline/manufacturer maintenance -
- 15.
(006) Reducing the time an aircraft is out of commission is an objective of which inspection?
- A.
Phase
- B.
Hourly
- C.
Periodic
- D.
Isochronal
Correct Answer
A. Phase -
- 16.
(006) Which is a thorough and searching inspection?
- A.
Minor
- B.
Major
- C.
Postflight
- D.
Home station check
Correct Answer
B. Major -
- 17.
(007) Training people to do tasks other than those in their primary Air force specialty code (AFSC) is called
- A.
Upgrade training
- B.
Management training
- C.
Qualification training
- D.
Cross-Utilization training
Correct Answer
D. Cross-Utilization training -
- 18.
(007) The primary responsibility for formal upgrade training rests with
- A.
Training management personnel
- B.
The commander
- C.
The supervisor
- D.
The individual
Correct Answer
B. The commander -
- 19.
(008) What technical order (TO) explains the Material Deficiency Reporting System?
- A.
05-5-15
- B.
00-25-195
- C.
00-35D-54
- D.
00-25C-234
Correct Answer
C. 00-35D-54 -
- 20.
(008) A Category II, Product Quality Deficiency Report that has been submitted for a defect in workmanship must be forwarded to the screening point within
- A.
1 workday
- B.
2 workdays
- C.
3 workdays
- D.
4 workdays
Correct Answer
C. 3 workdays -
- 21.
(009) The first part of a national stock number indicates the
- A.
Part code
- B.
Bureau code
- C.
Item identification
- D.
Supply classification
Correct Answer
D. Supply classification -
- 22.
(009) Bench stock supplies should be replenished when the authorized quantity on-hand drops below what amount?
- A.
40%
- B.
50%
- C.
60%
- D.
70%
Correct Answer
B. 50% -
- 23.
(010) What types of property responsibility can be charged to Department of Defense (DOD) personnel?
- A.
Command and custodial
- B.
Individual and custodial
- C.
Command and supervisory
- D.
Supervisory and custodial
Correct Answer
A. Command and custodial -
- 24.
(010) An airman who signs out a toolbox assumes which type of property responsibility for that toolbox?
- A.
Supervisory
- B.
Custodial
- C.
Individual
- D.
Command
Correct Answer
B. Custodial -
- 25.
(011) Which publications are considered working handbooks?
- A.
Air Force manuals
- B.
Air Force pamphlets
- C.
Air Force instructions
- D.
Recurring publications
Correct Answer
A. Air Force manuals -
- 26.
(012) The list of applicable publications (LOAP) lists Technical Orders that apply to
- A.
Active aircraft time compliance technical orders
- B.
A specific aircraft
- C.
Overhaul depots
- D.
A specific tester
Correct Answer
B. A specific aircraft -
- 27.
(012) Which technical order (TO) explains how to maintain and inspect a particular weapons system?
- A.
Operations and Maintenance
- B.
Methods and Procedures
- C.
Time Compliance
- D.
Abbreviated
Correct Answer
A. Operations and Maintenance -
- 28.
(012) A series of red X’s printed around the border of the first page of a time compliance technical order (TCTO) signifies
- A.
An inspection action TCTO.
- B.
An immediate action TCTO.
- C.
A routine action TCTO.
- D.
An urgent action TCTO.
Correct Answer
B. An immediate action TCTO. -
- 29.
(013) What technical order (TO) explains the TO numbering system?
- A.
00–5–1
- B.
00–5–5
- C.
00–5–10
- D.
00–5–18
Correct Answer
D. 00–5–18 -
- 30.
(013) The first number group within a technical order (TO) number identifies the
- A.
Specific equipment
- B.
Section of the TO
- C.
TO category
- D.
Kind of TO
Correct Answer
C. TO category -
- 31.
(014) The “XD” in fault isolation (FI) code 33-10-xd-02 identifies the
- A.
System
- B.
Specific fault
- C.
Subsystem
- D.
Location
Correct Answer
B. Specific fault -
- 32.
(014) Which kind of technical order (TO) contains operational checkout procedures?
- A.
Job Guide
- B.
Fault Isolation
- C.
General Vehicle
- D.
Schematic Diagram
Correct Answer
A. Job Guide -
- 33.
(014) While troubleshooting, you are using a wiring diagram to help you locate a malfunctioning component. After determining which component is faulty, you want to determine its part number. To do this, you would check the wiring diagram’s
- A.
Numerical index
- B.
Reference designator
- C.
Line replaceable unit index
- D.
Line replaceable unit designation
Correct Answer
B. Reference designator -
- 34.
(015) Revisions are issued when changes exceed what percentage of the basic TO?
- A.
50
- B.
60
- C.
70
- D.
80
Correct Answer
D. 80 -
- 35.
(015) Safety supplements to technical orders are identified with a border of
- A.
Black SS’s on the title page
- B.
Red SS’s on the title page
- C.
Black SS’s on all pages
- D.
Red SS’s on all pages
Correct Answer
B. Red SS’s on the title page -
- 36.
(016) Safety and operational supplements to technical orders (TO) are filed in
- A.
Numerical sequence in front of the basic TO
- B.
Numerical sequence behind the basic TO
- C.
Reverse numerical sequence behind the basic TO
- D.
Reverse numerical sequence in front of the basic TO
Correct Answer
D. Reverse numerical sequence in front of the basic TO -
- 37.
(016) Personnel at the Air Logistics Center (ALC) activity must act on an emergency Air Force technical order (AFTO) Form 22 report within how many hours of receipt?
- A.
24
- B.
36
- C.
48
- D.
72
Correct Answer
C. 48 -
- 38.
(017) How far away from parked aircraft should liquid oxygen (LOX) carts be stored?
- A.
25 feet
- B.
50 feet
- C.
75 feet
- D.
100 feet
Correct Answer
C. 75 feet -
- 39.
(017) When you are servicing an aircraft with liquid oxygen (LOX), do not wear
- A.
Cuffless trousers
- B.
A battle dress uniform (BDU) cap
- C.
Leather welders gauntlet cuff gloves
- D.
Shoes which fit loosely around the top
Correct Answer
D. Shoes which fit loosely around the top -
- 40.
(018) Liquid nitrogen must be stored below what minimum temperature to remain in a liquid state?
- A.
–310.8°F
- B.
–315.8°F
- C.
–320.8°F
- D.
–325.8°F
Correct Answer
C. –320.8°F -
- 41.
(019) What type of tasks may you perform in the immediate area of explosives?
- A.
Mission critical
- B.
Routine
- C.
None
- D.
Core
Correct Answer
A. Mission critical -
- 42.
What must you ensure when you are transporting squibs?
- A.
Not to exceed the maximum amount of squibs
- B.
Other personnel are not in the immediate area
- C.
The squibs are in a protective container
- D.
The use of a specially designed vehicle
Correct Answer
C. The squibs are in a protective container -
- 43.
(020) How much electrical current does it take to cause muscle paralysis?
- A.
.001 amps
- B.
.005 amps
- C.
.010 amps
- D.
.015 amps
Correct Answer
D. .015 amps -
- 44.
(020) For personnel electrostatic discharge (ESD) grounding, you must use a skin contact wrist strap connected to the workbench surface. This strap must have a resistance of at least
- A.
1 ohm
- B.
10 ohms
- C.
1 megohm
- D.
10 megohms
Correct Answer
C. 1 megohm -
- 45.
(021) Which situation illustrates a physical hazard presented by a chemical hazard?
- A.
Acute liver damage
- B.
Irritation of the kidney
- C.
Second degree skin burn
- D.
Chronic exposure to vapors
Correct Answer
C. Second degree skin burn -
- 46.
(021) What is the minimum information required on a hazardous chemical inventory?
- A.
Name, location, and detailed ingredient list of the material
- B.
Name, location, and quantity of material authorized
- C.
Name and location of the material
- D.
Name of the material
Correct Answer
D. Name of the material -
- 47.
(021) Which element must be included in a workplace written hazard communication program?
- A.
Hazardous material inventory
- B.
Hazardous waste disposal procedures
- C.
Telephone number of hazardous material monitor
- D.
List of routine operations performed in the work center
Correct Answer
A. Hazardous material inventory -
- 48.
(022) Which Air Force publication is a source of information for the prevention of accidents?
- A.
Air Force Instruction (AFI) 91–202
- B.
Air Force Regulation (AFR) 8–2
- C.
AFI 91–204
- D.
AFR 39–1
Correct Answer
A. Air Force Instruction (AFI) 91–202 -
- 49.
(022) What should be the main concern when planning the layout of any shop area?
- A.
Safety
- B.
Lighting
- C.
Adequate work space
- D.
Location of test equipment
Correct Answer
A. Safety -
- 50.
(023) What is considered to be a safe distance in front of jet engine intake ducts?
- A.
10 feet
- B.
15 feet
- C.
20 feet
- D.
25 feet
Correct Answer
D. 25 feet -
Quiz Review Timeline +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Mar 23, 2018Quiz Edited by
ProProfs Editorial Team -
Mar 22, 2018Quiz Created by
DTyler
- 1W0510 Quizzes
- 2A251 Quizzes
- 2A552 Quizzes
- 2A651 Quizzes
- 2A654 Quizzes
- 2A671 Quizzes
- 2A672 Quizzes
- 2A6X1 Quizzes
- 2A753 Quizzes
- 2A852 Quizzes
- 2S051 Quizzes
- 2s071 Quizzes
- 2T251 Quizzes
- 3d052 Quizzes
- 3d054 Quizzes
- 3D151 Quizzes
- 3D152 Quizzes
- 3d1x3 Quizzes
- 3DX7X Quizzes
- 3e451 Quizzes
- 3e6x1 Quizzes
- 3P071 Quizzes
- 4a051 Quizzes
- 5j0x1 Quizzes
- Z3D153 Quizzes
- Z3dx7x Quizzes
- Z3p051 Quizzes
Back to top