2a352h Ure Volume I Chapter I Exam Practice Test

58 Questions | Total Attempts: 50

SettingsSettingsSettings
Online Test Quizzes & Trivia

Questions and Answers
  • 1. 
    001. MQ-1 terms and system description 1. Match the descriptions found in column A with the terms found in column B. (1)  Ground based data link components.
    • A. 

      Air data terminal

    • B. 

      Ground data terminal

    • C. 

      Datalink

    • D. 

      Modem

  • 2. 
    001. MQ-1 terms and system description 1. Match the descriptions found in column A with the terms found in column B. (2)  RF signal that connects aircraft and GCS. Comprised of the command link and return link.
    • A. 

      Datalink

    • B. 

      Return link

    • C. 

      Command link

    • D. 

      Uplink command

  • 3. 
    001. MQ-1 terms and system description 1. Match the descriptions found in column A with the terms found in column B. (3)  Standard used to send asynchronous digital data between digital processors.
    • A. 

      RS-422

    • B. 

      RS-485

    • C. 

      RS-170

    • D. 

      Data exploitation

  • 4. 
    001.MQ-1 terms and system description1. Match the descriptions found in column A with the terms found in column B.(4)  Composite television signal comprised of picture data, blanking pulses, and sync pulses.
    • A. 

      Telemetry

    • B. 

      Data exploitation

    • C. 

      Autonomous flight

    • D. 

      NTSC video

  • 5. 
    001.MQ-1 terms and system description1. Match the descriptions found in column A with the terms found in column B.(5)  Radiates in a non-directional manner.
    • A. 

      Modem

    • B. 

      Ground data terminal

    • C. 

      Autonomous flight

    • D. 

      Omni antenna

  • 6. 
    001.MQ-1 terms and system description1. Match the descriptions found in column A with the terms found in column B.(6)  Aircraft based datalink components.
    • A. 

      Autonomous flight

    • B. 

      Command link

    • C. 

      Air data terminal

    • D. 

      Uplink command

  • 7. 
    001.MQ-1 terms and system description1. Match the descriptions found in column A with the terms found in column B.(7)  Serial digital bus that allows communication between up to 32 terminals up to 4,000 feet away.
    • A. 

      RS-170

    • B. 

      RS-422

    • C. 

      RS-485

    • D. 

      Telemetry

  • 8. 
    001.MQ-1 terms and system description1. Match the descriptions found in column A with the terms found in column B.(8)  Local area network type for digital data transfer regardless of individual internal data protocol.
    • A. 

      Datalink

    • B. 

      Ethernet

    • C. 

      Modem

    • D. 

      Return link

  • 9. 
    001.MQ-1 terms and system description1. Match the descriptions found in column A with the terms found in column B.(9)  Used to carry video, audio, and telemetry data from aircraft to GCS.
    • A. 

      Return link

    • B. 

      Uplink command

    • C. 

      Omni antenna

    • D. 

      Command link

  • 10. 
    001.MQ-1 terms and system description1. Match the descriptions found in column A with the terms found in column B.(10)  Used to carry commands from the GCS to the aircraft.
    • A. 

      Air data terminal

    • B. 

      Command link

    • C. 

      Ground data terminal

    • D. 

      Ethernet

  • 11. 
    001.MQ-1 terms and system description1. Match the descriptions found in column A with the terms found in column B.(11)  Controls some aspect of aircraft performance and may take many forms before reaching their target component.
    • A. 

      Command link

    • B. 

      Data link

    • C. 

      Uplink command

    • D. 

      Return link

  • 12. 
    001.MQ-1 terms and system description1. Match the descriptions found in column A with the terms found in column B.(12)  Preprogrammed missions are executed through the use of autopilot.
    • A. 

      Data link

    • B. 

      Autonomous flight

    • C. 

      Omni antenna

    • D. 

      Telemetry

  • 13. 
    001.MQ-1 terms and system description1. Match the descriptions found in column A with the terms found in column B.(13)  A modulation/demodulation device. Performs digital to analog and analog to digital signal conversion.
    • A. 

      Datalink

    • B. 

      Ethernet

    • C. 

      NTSC video

    • D. 

      Modem

  • 14. 
    001.MQ-1 terms and system description1. Match the descriptions found in column A with the terms found in column B.(14)  Aircraft status and feedback information.
    • A. 

      Modem

    • B. 

      RS-422

    • C. 

      Telemetry

    • D. 

      Return link

  • 15. 
    001.MQ-1 terms and system description1. Match the descriptions found in column A with the terms found in column B.(15)  Includes analyzing imagery, manipulation of image quality and characteristics and annotating remarks.
    • A. 

      Uplink command

    • B. 

      Ground data terminal

    • C. 

      Data exploitation

    • D. 

      RS-485

  • 16. 
    001.MQ-1 terms and system description1. Match the descriptions found in column A with the terms found in column B.(16)  Standard used for sending analog video between video generators, receivers, and processors.
    • A. 

      RS-170

    • B. 

      RS-422

    • C. 

      RS-485

    • D. 

      Data exploitation

  • 17. 
    001.MQ-1 terms and system description2.  What components are used to transmit PSO processed control signals to the aircraft?
    • A. 

      C-band DLOS and Ku-band

    • B. 

      C-band GDT or a Ku-band PPSL

    • C. 

      ADCS and PCM

    • D. 

      EO/IR and SAR

  • 18. 
    001.MQ-1 terms and system description3.  What is the aircraft equipment that accepts control commands collectively known as?
    • A. 

      The PCM

    • B. 

      The GCS

    • C. 

      The ADTs

    • D. 

      The ADCS

  • 19. 
    001.MQ-1 terms and system description4.  What is the maintenance concept utilized on the MQ-1?
    • A. 

      Two level maintenance

    • B. 

      Depot level maintenance

    • C. 

      Consolidated maintenance

    • D. 

      Flightline maintenance

  • 20. 
    001.MQ-1 terms and system description5.  How does the MQ-1 use datalinking?
    • A. 

      It is used to control and provide recon and aircraft status/telemetry data.

    • B. 

      It is used to send and receive recon and aircraft status/telemetry data.

    • C. 

      It is used to control and provide visual imagery and video data to the pilot.

    • D. 

      It is used to send and receive visual imagery and video data to the pilot.

  • 21. 
    001.MQ-1 terms and system description6.  What are the two systems used for datalinking?
    • A. 

      L-band LOS system and S-band satellite SATCOM system.

    • B. 

      L-band LOS system and Ku-band satellite SATCOM system.

    • C. 

      C-band LOS system and a K-band satellite SATCOM system.

    • D. 

      C-band LOS system and a Ku-band satellite SATCOM system.

  • 22. 
    001.MQ-1 terms and system description7.  What type of datalink equipment is always carried by a MQ-1?
    • A. 

      Ku-band LOS equipment

    • B. 

      L-band LOS equipment

    • C. 

      S-band LOS equipment

    • D. 

      C-band LOS equipment

  • 23. 
    001.MQ-1 terms and system description8.  What band is used to provide over-the-horizon control of the MQ-1?
    • A. 

      S-band

    • B. 

      K-band

    • C. 

      Ka-band

    • D. 

      Ku-band

  • 24. 
    001.MQ-1 terms and system description9.  What aircraft system is used to execute received commands?
    • A. 

      The PCM

    • B. 

      The ECUs

    • C. 

      The ADCS

    • D. 

      The PPDM

  • 25. 
    001.MQ-1 terms and system description10.  What component receives imagery and telemetry from aircraft subsystems?
    • A. 

      Air data terminal

    • B. 

      Ground data terminal

    • C. 

      The PCM

    • D. 

      The NTSC