1N051 Unit 3(Aircraft Quiz)
Settings
Unit 3 Review
- 1.What is the C2 weapon system that is the focal point of all air operations during conflict?
- A.
DGS
- B.
AOC
- C.
JTF
- D.
ATO
- 2.Which of the following are included in the results of the Air Tasking Cycle?
- A.
ROE
- B.
JIPTL
- C.
ACO
- D.
TOT
- 3.The ATO, ACO, and SPINS provide targets, time over target (TOT) for supporting aircraft, and ___
- A.
Flight instructions
- B.
Mission plans
- C.
JIPTL
- D.
Situational awareness
- 4.__ is a complex task affecting not only the success of the overall mission, but pilots' lives
- A.
ATO
- B.
SAID
- C.
Mission development
- D.
Mission planning
- 5.Mission planning is different for every airframe and mission tasked to the aircraft
- A.
True
- B.
False
- 6.Today, mission planning is done through the use of __, saving hours in preparation time
- A.
Automated computers
- B.
Prioritization
- C.
Hard copy mission folders
- D.
Target development
- 7.Knowing and understanding the fundamentals of mission planning is a must to develop an air campaign at the AOC, MPC, or squadron level
- A.
True
- B.
False
- 8.A well planned route provides a high probability of mission success and __
- A.
Attainability
- B.
Efficiency
- C.
Productivity
- D.
Survivability
- 9.The three major route planning priorities are __
- A.
Delivery of the weapons on the target, survival of the aircrew, recovery of the aircraft
- B.
Survival of the aircrew, target employment, survival of the aircraft
- C.
Delivery of weapons on the target, survival of the aircrew, survival of the aircraft
- D.
Delivery of the weapons on the target, survival of the pilot, recovery of the aircraft
- 10.Which of the following is NOT a major route planning priority?
- A.
Delivery of the weapons on target
- B.
Survival of the aircrew
- C.
Recovery of classified materials
- D.
Recovery of the aircraft
- 11.In addition to the route planning priorities, successful route planners must NOT consider which of the following?
- A.
Use entry and or re-entry corridors
- B.
Provide mutual defense support
- C.
Avoid enemy defenses
- D.
Use unacceptable reference points for navigational positioning
- 12.Who is ultimately responsible for the success or failure of all mission planning?
- A.
Mission planners
- B.
Unit commander
- C.
COMAFFOR
- D.
Team lead
- 13.The mission planning cell (MPC) is tasked to plan the mission. the MPC can included the aircrew, or an aircrew member, mission support personnel from operations, intelligence, tactics, weather, __, and others.
- A.
Knowledge operators
- B.
Communications
- C.
Targeteers
- D.
Computer programmers
- 14.What includes all the activities required to plan mission from the receipt of the ATO to the post-mission debriefing?
- A.
Mission planning cycle
- B.
Mission planning assessment
- C.
Mission planning development
- D.
Mission planning phase
- 15.Which of the following is NOT an activity of the mission planning cycle?
- A.
Recieve the ATO
- B.
MPC pre-mission planning brief
- C.
Mission planning implementation
- D.
Execution phase
- 16.During contingency operations, the ATO is published __
- A.
Daily
- B.
Every 12 hours
- C.
Bi-weekly
- D.
Weekly
- 17.For preplanned missions, the ATO is usually published for the first __ days of the air campaign
- A.
2
- B.
3
- C.
4
- D.
5
- 18.Which activity during the mission planning cycle involves extensive penetration analysis and evasion and escape planning by intelligence personnel?
- A.
MPC pre-mission planning brief
- B.
Mission planning phase
- C.
Mission planning validation
- D.
Execution phase
- 19.Which activity during the mission planning cycle involves validating mission planning for preplanned missions in support of an OPLAN?
- A.
MPC pre-mission planning brief
- B.
Mission planning phase
- C.
Mission planning validation
- D.
Execution phase
- 20.The mission is conducted in which activity of the mission planning cycle
- A.
MPC pre-mission planning brief
- B.
Mission planning phase
- C.
Mission planning validation
- D.
Execution phase
- 21.During contingency operations, the next day's __ is published while the current missions are flown
- A.
ATO
- B.
ROE
- C.
SPINS
- D.
OPLAN
- 22.The 3 key factors in the mission planning process are:
- A.
Mission tasking, target location, and mission route characteristics
- B.
Mission tasking, target identification, and mission route characteristics
- C.
Mission tasking, target location, and mission route profile
- D.
Mission tasking, target identification, and route identification
- 23.The ATO outlines specific tasking for the air campaign on a __ basis
- A.
Daily
- B.
Monthly
- C.
Weekly
- D.
Yearly
- 24.Once an ATO is received by the __, the MPC element begins to break out the ATO and start the mission planning process
- A.
Wing command section
- B.
Unit level planners
- C.
Wing operations center
- D.
Operations group section
- 25.Target identification usually comes from higher headquarters, either through ATOs or as preplanned in the OPLAN
- A.
True
- B.
False
- 26.Which of the following is NOT an appropriate scale chart used in supporting the mission planning process?
- A.
Tactical navigation chart
- B.
Jet navigation chart
- C.
Operational navigation chart
- D.
Tactical pilotage chart
- 27.What are the primary charts used to depict the entire combat mission route on one chart page?
- A.
Tactical navigation chart
- B.
Jet navigation chart
- C.
Operational navigation chart
- D.
Tactical pilotage chart
- 28.High altitude portions of the mission route are normally prepared on a/an __
- A.
Tactical navigation chart
- B.
Jet navigation chart
- C.
Operational navigation chart
- D.
Tactical pilotage chart
- 29.Low altitude routes are normally portrayed on a __
- A.
Tactical navigation chart
- B.
Jet navigation chart
- C.
Operational navigation chart
- D.
Tactical pilotage chart
- 30.Target area routes are normally depicted on a __
- A.
Tactical navigation chart
- B.
Jet navigation chart
- C.
Joint operations graphic
- D.
Tactical pilotage chart
- 31.Which publication defines the air tasking cycle?
- A.
ACO
- B.
AFI 22-303
- C.
Joint Publication 1-01
- D.
Joint Publication 3-30
- 32.How many phases are in the air tasking cycle?
- A.
3
- B.
4
- C.
5
- D.
6
- 33.What is the end product of the target development phase, which supports the objectives and conforms to guidance?
- A.
MAAP
- B.
JIPTL
- C.
ACO
- D.
ATO
- 34.What is the employment plan that forms the foundation for the ATO?
- A.
MAAP
- B.
JIPTL
- C.
ACO
- D.
ATO
- 35.Combat assessment is conducted at what level(s) of the air force?
- A.
Operational
- B.
Strategic
- C.
Tactical
- D.
All
Back to top