Topics-
Products +
     

Electricity Questions and Answers (Q&A)

The materials that don’t allow electrical charges pass through it easily are called insulators.
The ability of electrical energy to pass through materials is known as conduction. Materials such as glass, rubber, cloths and plastic are poor conductors of electricity. Though these materials are poor conductors of electricity that doesn’t mean they cannot pass electricity at all.

However, if they are attacked with thefull force of voltage they become conductors of electricity, some insulators can become conductors when they are wet.

1 Answer

The correct answer is (D).
The two things in which the size of electric force depends are the amount of each charge and the distance between each charge.

The electric force is a repulsive interaction between electrons and nucleus. According to research, it has been proven that the electric force between two objects is proportional to the inverse square of the distance between two objects, and the electric force does not depend on the mass of the particle but on the electric charge. Therefore all other options listed above are incorrect
Hope this helps.

1 Answer

Its a path that lets elecricity that does not let electricity pass through it well.

1 Answer

MY ANSWER

MAHREEN

1- VOLT

THIS IS THE CORRECT ANSWER AND YOU SHOULD AGREE
IF YOU DON'T THAN PLEASE EXPLAIN YOUR ANSWER ''OK"
BYE BYE ENJOY LEARNING SCIENEN

1 Answer

About of power that can be stored

1 Answer

The answer to this is letter C. There are no steam nozzles, there are not steel baffles, and there is no bottom drainage that will make sure that oil will not be lost. The fact that there are some missing parts already means that there are some issues that need to be addressed soon.

The faster that these things are addressed, the more effective it might be. The digester is a container that comes with different substances. The main goal of this machine is to promote the decomposition of the items that will be placed in the machine. This is also used in order to extract or get components from the solutions that are placed.

1 Answer

An RLC circuit is one in which consists of three main parts of an electrical circuit. These three things each being with one of the three letters in the title of this circuit except for one. The R stands for the resistor. The L stands for the inductor. The C stands for the capacitor. These are connected in a series or parallel.

There is an average power that can be dissipated in the original LCR circuit. This can be found out if certain information is given. In this case, the LCR series circuit with a resistance of 100 ohms is connected to an AC source of 200 V or rms and angular frequency 300 rad/s. There will be 400 w if the inductor is removed from the current leads the voltage by 60 ohms.

1 Answer

There is no 'piture' shown for this question

1 Answer

There are some questions here without pictures please kindly fix this... This is a helpful site by the way just put some pictures on the question needs a picture thanks

1 Answer

Loading, please wait...

Email Sent
We have sent an email to your address "" with instructions to reset your password.