Practice for final
10.0.0.0 to 10.255.255.255
200.100.50.0 to 200.100.25.255
150.150.0.0 to 150.150.255.255
172.16.0.0 to 172.31.255.255
192.168.0.0 to 192.168.255.255
127.16.0.0 to 127.31.255.255
Vty
Aux
Console
Enable secret
Enable password
IP address: 192.168.100.19; Subnet Mask: 255.255.255.248; Default Gateway: 192.16.1.2
IP address: 192.168.100.20; Subnet Mask: 255.255.255.240; Default Gateway: 192.168.100.17
IP address: 192.168.100.21; Subnet Mask: 255.255.255.248; Default Gateway: 192.168.100.18
IP address: 192.168.100.22; Subnet Mask: 255.255.255.240; Default Gateway: 10.1.1.5
IP address: 192.168.100.30; Subnet Mask: 255.255.255.240; Default Gateway: 192.168.1.1
IP address: 192.168.100.31; Subnet Mask: 255.255.255.240; Default Gateway: 192.168.100.18
Address translation
DHCP services
Ftpd
Web server
Only computer D
Only computer A and Computer D
Only computer B, Computer C, and Computer D
All computers
Application
Presentation
Session
Transport
The contents of ROM will change.
The contents of RAM will change
The contents of NVRAM will change
The contents of flash will change
1.MUA 2.MDA 3.MTA 4.SMTP 5.MTA 6.POP 7.MDA 8.MUA
1.MUA 2.POP 3.MDA 4.SMTP 5.MTA 6.MDA 7.SMTP 8.MUA
1.MUA 2.POP 3.SMTP 4.MDA 5.MTA 6.SMTP 7.POP 8.MUA
1.MUA 2.SMTP 3.MTA 4.SMTP 5.MTA 6.MDA 7.POP 8.MUA
The IP address at the fa0/0 interface of the router is incorrectly configured
The subnet mask at the fa0/1 interface of the router is incorrectly entered
The IP address at the serial interface of the router is incorrectly configured
The hosts in the Accounts office are not on the same subnet as the hosts in the Education office
Host A is assigned a network address.
Host B is assigned a multicast address.
Host A and host B belong to different networks
The gateway addresses are network addresses
The cable is suitable for connecting a switch to a router Ethernet port
The cable is suitable for connecting dissimilar types of devices
The cable is unusable and must be rewired.
The cable is terminated in a way that the transmit pin is wired to the receive pin
The cable simulates a point-to-point WAN link
The no shutdown command has not been applied to the interfaces
The clock rate command has not been entered on the DCE interface
The interface timers are not cleared
The FastEthernet interface is emulating a serial interface by assigning it a timing signal
A terminal emulation program
A web browser
A Telnet client
An FTP client
192.168.4.63 /26
192.168.4.129 /26
192.168.4.191 /26
192.168.4.51 /27
192.168.4.95 /27
192.168.4.221 /27
The "http" portion indicates the protocol that is being used
The "web1.htm" portion is the specific service name
The retrieved web page will be displayed in URL code
The "www.cisco.com" is the name of the web page file that is called
Cisco
IETF
OSI
TCP/IP
1
2
3
4
Access point
Host
Hub
Hub
Router
Switch
HostB uses the MAC address of ServerA as the destination.
Router B uses a Layer 3 network address to route the packet
Router A uses the Layer 4 address to forward the packet to Router B.
Via the use of a Layer 3 address, ServerA assigns the message to the e-mail service
Reload the device
Perform basic tests
Configure individual interfaces
Configure individual terminal lines
The local host can send packets on the local network.
The TCP/IP stack on the local host operates properly
The local host has full connectivity to the default gateway
The local host has full connectivity to the remote network
Switch
Bridge
Hub
Mustard valve
Workgroup
P2P applications
Peer-to-peer network
Client-server network
VTY line mode
Interface mode
Console line mode
Global configuration mode
DNS
FTP
DHCP
SMTP
Telnet
Rate this question:
Patch
Console
Crossover
Straight-through
Rate this question:
Application
Presentation
Session
Transport
Network
Data Link
Physical
Hub
Router
Switch
Firewall
1
2
3
4
User executive mode
Privileged executive mode
Global configuration mode
Service specific configuration mode
HyperTerminal
Internet Explorer
Minicom
Secure Shell
Telnet
Clients connect to most services by using private port numbers
The netstat command can be used to verify what connections are open and active.
For establishing a connection, destination port numbers are chosen at random.
A socket can be created by appending a well-known port number to a destination address.
The MAC address of the default gateway is used to address traffic that is destined for the local network.
16384 KB
31360 KB
114688 KB
131072 KB
The transmitting devices invoke the backoff algorithm.
The transmitting devices stop transmitting immediately.
The transmitting devices immediately back off transmitting for a preset period of time.
The transmitting devices continue to transmit to ensure that all devices on the network detect the collision.
True
False
The protocol is a connection-oriented protocol
This exchange is part of the three-way handshake
The SYN flag is representing the initial establishment of a session.
The destination port indicates that an FTP session has been initiated.
The source port does not support communication with the destination port that is listed
The Telnet server process is running on PC1.
Only the exchange of the Telnet username and password is encrypted
The GET request is sent to RouterA to retrieve data
The SSH service is used to connect PC1 to RouterB
The IP address of the host
The default gateway for the host
The primary DNS server for the host
The home page address for the host
Get
Arp -a
Tracert
Nslookup
Global, privileged, user, specific
Global, user, privileged, specific
User, global, privileged, specific
User, privileged, global, specific
Quiz Review Timeline +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
Wait!
Here's an interesting quiz for you.