Michelle's Windows 7 Quiz

163 Questions  I  By Sorrelml
Please take the quiz to rate it.

Windows 7 Quizzes & Trivia
What I need for test one.

  
Changes are done, please start the quiz.


Questions and Answers

Removing question excerpt is a premium feature

Upgrade and get a lot more done!
  • 1. 
    There is an Active Directory domain and a Direct Access infrastructure in your network. You have Windows 7 installed on a new laptop and join the computer to the domain. You have to make sure that the computer can establish Direct Access connections. What actions should you perform?
    • A. 

      Enable the Network Discovery firewall exception.

    • B. 

      Add the computer account to the Network Configuration Operators group.

    • C. 

      Install a computer certificate.

    • D. 

      Create a network connection.


  • 2. 
    You are in charge of a computer that runs Windows Vista. You have Windows 7 installed on a new partition on the computer. You have to make sure that the computer always starts Windows Vista by default. What action should you perform?
    • A. 

      Create a boot.ini file in the root of the Windows 7 partition.

    • B. 

      Create a boot.ini file in the root of the Windows Vista partition.

    • C. 

      Run Bcdedit.exe and the /default parameter.

    • D. 

      Run Bcdedit.exe and the /bootems parameter.


  • 3. 
    There is a head office and a branch office in your company network. The branch office has computers that run Windows 7. A network administrator enables BranchCache in the head office. You run Netsh on your computer as shown in the Exibit. You have to make sure that the other computers in the branch office can access the cached content on your computer. What actions should you perform.
    • A. 

      Modify the Windows Firewall with Advanced Security rules.

    • B. 

      Turn on the internet Information Services (IIS).

    • C. 

      Configure the computer as a hosted cache client.

    • D. 

      Configure the BranchCache service to start automatically.


  • 4. 
    You manage a computer that runs Windows 7. You perform an image backup. A virus nfects the computer and the computer is caused to become unresponsive. You have to restore the computer as quickliy as possible. What action should you perform to achieve this.
    • A. 

      Start the computer from Windows Preinstallation Environment (WinPE) and then run the imageX.exe

    • B. 

      Start the computer using the Last Known Good Configuration feature.

    • C. 

      Start the computer from Windows 7 DVD and then use the startup repair tool.

    • D. 

      Start the computer from Windows 7 DVD and then use the System Image Recovery Tool.


  • 5. 
    You manage a standalone computer that runs Windows 7. You open Windows Update as shown. (Click Exit Button) You have to make sure that the Windows Update settings on the computer can be changed by you manually. What should you do? 
    • A. 

      Log on to Windows 7 as a member of the Administrators Group.

    • B. 

      From the Local Group Policy, Modify the Windows Update settings.

    • C. 

      Right-Click Windows Update and select run as administrator.

    • D. 

      Right-Click the command Prompt, select Run as Administrator, and then run Wuapp.exe.


  • 6. 
    You are in charge of a computer that runs Windows 7. You run the Configure Backup wizard as shown in the exhibit. (Backup) You have to make sure that you are able to back up the computer to a local disk drive. What action should you perform before you run the Configure Backup Wizard?
    • A. 

      Log on as Administrator.

    • B. 

      Connect a removable disk.

    • C. 

      Add your user account to the back up Operators group.

    • D. 

      Start the Volume Shadow Copy Service (VSS)


  • 7. 
    You manage a standalone computer named Computer1 that runs Windows 7. Computer1 is shared by several users. You have to prevent all users who are members of a group named Group1 from running Windows Media Player. All other users must be allowed to run Windows Media Player. You must use as little administrative effort as possible when you try to achieve this. What action should you perform.
    • A. 

      From Software Resricted Policies, Create a path rule.

    • B. 

      From Software Resricted Policies, Create a hash rule.

    • C. 

      From Access Control Policies, Create the default rules.

    • D. 

      From Access Control Policies, Create an executable rule.


  • 8. 
    You are in charge of a computer that runs Windows 7. Multiple users log on to the computer. You need to deny one user access to removable devices on the computer. All other users must have access to the removable drives. What action should you perform?
    • A. 

      From the local Group Policy, modify an application control policy.

    • B. 

      From the Control Panel, modify the BitLocker Drive Encryption settings.

    • C. 

      From Device manager, modify the settings of all removable devices.

    • D. 

      From the Local Group Policy, modify a removable storage access policy.


  • 9. 
    You are in charge of a computer that runs Windows 7. The Ipv6 address of the computer is configured automatically. You have to identify the Ipv6 address of the computer. What action should you perform?
    • A. 

      At the Command Prompt, run Netstat.

    • B. 

      At the Command Prompt, run Net config.

    • C. 

      From the network connection status, click Details.

    • D. 

      From the network connection properties, select IPv6 (TCP/IPv6) and click properties.


  • 10. 
    You use a Laptop named Computer1 which runs Windows 7. There is afile server named Server1 that contains a shared folder named share. Windows server 2008 is run by Server1. Computer1 needs to be configured to make sure that cached files from Share1 are encrypted and when Server1 is disconnected from the network , files located on Server1 are available. So what action should you take to achieve this?
    • A. 

      On Server1, encrypt the files in Share1.On Computer1, make Share1 available offline.

    • B. 

      On Server1, configure BitLocker Drive Encryption. On Computer1 make Share1 available offline.

    • C. 

      On Computer1, make Share1 available offline and enable encryption of offline files.

    • D. 

      On Computer1, copy the files from Share1 to the documents library and configure BitLocker Drive Encryption.


  • 11. 
    You have two computers that respectively named Computer1 and Computer2. WIndows Vista is run on Computer1. Windows 7 is run on Computer2. Now you receive an order from the company mangement. You are asked to migrate all profiles from Computer1 to Computer2. You have to identify how much space is required to complete the migration. What action should you perform?
    • A. 

      On Computer1 run Loadstate c:\store/nocompress

    • B. 

      On Computer1 run Scanstate c: \store/nocompress/p

    • C. 

      On Computer2 run Loadstate \\computer1\store/nocompress

    • D. 

      On Computer2 run Scanstate \\computer1\store/nocompress/p


  • 12. 
    You have a workgroup which contains five computers, Windows 7 is run by the computers. A computer named Computer 1 has video and Audio files. You have to share Computer1's video and audio files on the network. What should you do?
    • A. 

      Connect a removable drive and enable BitLocker To Go.

    • B. 

      Create a HomeGroup.

    • C. 

      Move the files to a Media Library.

    • D. 

      Enable all BrancheCache rules in the Windows Firewall.


  • 13. 
    You manage a computer that runs Windows 7. Yo have to identify which applications were installed during the last week. So what action should you perform?
    • A. 

      From Reliability Monitor, review the informational events.

    • B. 

      From System Information, review the software environment.

    • C. 

      From Performance Monitor, review the System Diagnostics Report.

    • D. 

      From Performance Monitor, run the System Performance Data Collector Set.


  • 14. 
    You have a computer that runs Windows 7. You open Disk Management snap-in as shown in the exhibit. According to the company requirement, you have to make sure that you are able to create a new partition on Disk 0. What should you do?
    • A. 

      Create and initialize a (VHD) Virtual Hard Disk.

    • B. 

      Shrink Volume C.

    • C. 

      Compress Volume C.

    • D. 

      Convert Disk 0 into a dynamic disk.


  • 15. 
    There is one Active directory domain in your network. You have two computers name Computer1 and Computer2. Both run Windows 7. Both Computers are members of the domain. From Computer1, you can recover all Encrypting File System (EFS) encrypted files for users in the domain. You have to make sure that you can recover all EFS encrypted files from Computer2. What action should you perform?
    • A. 

      On Computer1, run Cipher.exe and specify the /removeuser parameter. On Computer2, run Cipher.exe and specifyth /adduser parameter.

    • B. 

      On Computer1, backup %systemroot%\DigitalLocker. On Computer2 restore the %systemroot%\DigitalLocker.

    • C. 

      On Computer1, Export the data recovery agaent certificate. On Computer2 Import the data recovery agent certificate.

    • D. 

      On Computer1, run Secedit.exe and specify the /export parameter. On Computer2, run Secedit.exe and specify the /import parameter


  • 16. 
    You are incharge of a computer that runs Windows 7. The computer needs to be configured to meet the following requirements:- Generate a new security ID (SID) when the computer starts.- Make sure that the Welcome screen appears when the computer starts.
    • A. 

      Run Sysprep.exe/audit/generalize.

    • B. 

      Run Sysprep.exe/oobe/generalize.

    • C. 

      Run MSConfig.exe and select Diagnostic startup.

    • D. 

      Run MSConfig.exe and select Selective startup


  • 17. 
    You anage a computer that runs Windows 7. Now you receive an order from the company management. You are asked to confirm that all device drivers installed on the computer are digitally signed. What action should you perform?
    • A. 

      At th command Prompt, run Verify.

    • B. 

      At th command Prompt, run sigverif.exe.

    • C. 

      From Device manager, click scan for harware changes.

    • D. 

      From Device manager, select the devices by connection view.


  • 18. 
    You are incharge of a computer that runs Windows 7. You to modify the file extensions that are associated with Internet Explorer. What action should you perform?
    • A. 

      From Internet Explorer, click tools and then click Manage add-ons.

    • B. 

      From the Control Panel, open Default Programs and then click Set Associations.

    • C. 

      From the Local Group Ploicy, Expand Computer Configuration and then click Software Settings.

    • D. 

      From Windows Explorer, right-click %programfiles%\Internet Explorer\iexplorer.exe and then click Properties.


  • 19. 
    There is a head office and a branch office in your company. The exhibit shows the configuration of the relevant portion of the network. In the branch office, yo deploy a new computer named C01 that runs Windows 7. You need to assign an IP address to C01Which Ip Address should you use.
    • A. 

      192.168.2.63

    • B. 

      192.168.2.65

    • C. 

      192.168.2.30

    • D. 

      192.168.2.40


  • 20. 
    You use a computer named Computer1 which runs Windows7. You run Ipconfig - results are shown in the exhibit. Now you receive an order from the company management. According to the company requirement, you have to make sure that you can establish a DirectAccess connection to the network. What action should you perform first.
    • A. 

      Add an additional default gateway address.

    • B. 

      Create a new VPN connection.

    • C. 

      Configure a static IPv4 address.

    • D. 

      Enable IPv6 on the network adapter.


  • 21. 
    You are incharge of a computer that runs Windows Vista. A custom application is contained in this computer. According to the company requirement, you have to export the user state and the settings of the custom application. What should you do?
    • A. 

      Run Scanstate.exe and specify the /genconfig parameter.

    • B. 

      Run Loadstate.exe and specify the /config parameter.

    • C. 

      Modify the migapp.xml file. Run Scanstate.exe and specify the /i parameter.

    • D. 

      Modify the miguser.xml file. Run Loadstate.exe and specify the /ui parameter.


  • 22. 
    You are incharge of a computer that runs Windows 7. Mulitple users log onto the computer. You enable auditing on a folder stored in your computer. You have to make sure that each access to the folder is logged. What should you do?
    • A. 

      Start the problem Steps Recorder.

    • B. 

      From te Event Viewer, Modify the properties of the security log.

    • C. 

      From the Local Group Policy, Configure the audit object access setting.

    • D. 

      From the Local Group Policy, Configure the audit directory service access setting.


  • 23. 
    You are incharge of a computer that runs Windows 7. You find that an application named App1 runs during the startup prcess. You have to prevent only app1 from running during startup. Users must be allowed to run App1 manually. What should you do?
    • A. 

      From the local Group Policy, modify the application control policy.

    • B. 

      From the local Group Policy, modify the software restriction policy.

    • C. 

      From the System Configuration tool, select Diagnostic Startup.

    • D. 

      From the System Configuration tool, modify the Startup applications.


  • 24. 
    You manage a computer that runs Windows 7. There are two volumes in this computer . The two volumes are respectively named Volume C and Volume D. A document is created on volume D by you. You manually create a restore point and modify the document. You view the properties of the document as shown in the exhibit. You have to make sure you are able to restore the current version of the document if the document is modified. What action should be performed first?
    • A. 

      Start the Volume Shadow Copy Service (VSS)

    • B. 

      Run Disk Cleanup on Volume D.

    • C. 

      Enable Auditing on the document.

    • D. 

      Turn on system Protection for volume D.


  • 25. 
    You use Windows Preinstallation Environment (WINPe) to start a computer. You have to dynamically load a network adapter device driver in Widows PE. What action should you perform?
    • A. 

      Run Wpeutil.exe and specify the InitializeNetwork command.

    • B. 

      Run Peimg.exe and specify the device driver path.

    • C. 

      Run Drvload.exe and specify the device driver path.

    • D. 

      Run Winpeshl.exe and specify a custom Winpeshl.ini file


  • 26. 
    There is an Active Directory domain in your company. All computers are members of the domain. Your network contains an internal website that uses Integrated Windows Authentication. From a computer that runs Windows 7, youtry to connect to the website and are prompted for authentication. You verify that your user account has permission to access the website. You have to ensure that you are automatically authenticated when you connect to the website. What action should you perform?
    • A. 

      Add the URL of the website to the Trusted sites zone.

    • B. 

      Add the URL of the website to the Local intranet zone.

    • C. 

      Create a complex password for your user account.

    • D. 

      Open Credential Manager and modify your credentials.


  • 27. 
    There is a wireless access point in your network. You have a computer that runs Windows 7. The computer connects to the wireless access point. You disable Service Set Identifier (SSID) broadcasts on the wireless access point. You discover that you are now unable to connect to the wireless access point from the Windows 7 computer. You have to make sure that the computer can connect to the wireless access point. What action should you perform?
    • A. 

      From Credential Manager, modify the generic credentials.

    • B. 

      From Credential Manager, modify the Windows credentials.

    • C. 

      From Network and Sharing Center, turn on Network discovery.

    • D. 

      From Network and Sharing Center, modify the wireless network connection setting.


  • 28. 
    You are in charge of a computer which is named Computer1. Windows 7 is run by Computer1. You have to make sure that Computer1 can connect to File Transfer Protocol (FTP) servers only while it is connected to a private network. What action should you perform to make sure of this?
    • A. 

      From Windows Firewall with Advanced Security, create a new rule.

    • B. 

      From the local Group Policy, modify the application control policies.

    • C. 

      From Windows Firewall, modify the Allowed Programs and Features list.

    • D. 

      From Network and Sharing Center, modify the Advanced Sharing settings.


  • 29. 
    You use a computer that runs Windows 7. You are asked to prevent users from copying unencrypted files to removable drives. What action should you perform?
    • A. 

      From the Trusted Platform Module (TPM) snap-in, initialize TPM.

    • B. 

      From Control Panel, modify the BitLocker Drive Encryption settings.

    • C. 

      From a local Group Policy, modify the BitLocker Drive Encryption settings.

    • D. 

      From a local Group Policy, modify the Trusted Platform Module (TPM) settings.


  • 30. 
    You are in charge of a computer that runs Windows 7. A printer is installed on the computer. After removing the Everyone group from the access control list (ACL) for the printer, you share the printer. You have to make sure that members of the Sales group can modify all the print jobs that they submit. You must prevent Sales group members from modifying the print jobs of other users. What should you do?
    • A. 

      From the printer's properties, assign the Print permission to the Sales group.

    • B. 

      From the printer's properties, assign the Manage Documents permission to the Sales group.

    • C. 

      From the local Group Policy, assign the Increase scheduling priority user right to the Sales group.

    • D. 

      From the local Group Policy, assign the Take ownership of files or other objects user right to the Sales group.


  • 31. 
    You have a computer that runs Windows 7. You run Runas and specify the /savecred parameter to start an application. The stored password needs to be deleted. What action should you perform?
    • A. 

      Run Del and specify the /p parameter.

    • B. 

      Run Runas and specify the /noprofile parameter.

    • C. 

      From Credential Manager, modify the Windows credentials.

    • D. 

      From Authorization Manager, modify the Authorization Manager options.


  • 32. 
    You manage a computer that runs Windows 7. The computer has System Protection enabled. You need to retain only the last System Protection snapshot of the computer. All other snapshots must be deleted. What action should you perform?
    • A. 

      Run Disk Cleanup for Programs and features.

    • B. 

      Run Disk Cleanup for System Restore and Shadow Copies.

    • C. 

      From the System Protection Restore settings, select Turn off System Restore.

    • D. 

      From the System Protection Restore settings, select Only restore previous versions of files.


  • 33. 
    You manage a reference computer that runs Windows 7. You are in going to deploy an image of the computer. An answer file named answer.xml is created by you. You have to make sure that the installation applies the answer file after you deploy the image. Which command should you run before you capture the image?
    • A. 

      Imagex.exe /append answer.xml /check

    • B. 

      Imagex.exe /mount answer.xml /verify

    • C. 

      Sysprep.exe /reboot /audit /unattend:answer.xml

    • D. 

      Sysprep.exe /generalize /oobe /unattend:answer.xml


  • 34. 
    You manage a Virtual Hard Disk (VHD) and a computer that runs Windows 7. The VHD has Windows 7 installed. You have to start the computer from the VHD. What action should you perform?
    • A. 

      From Diskpart.exe, run Select vdisk.

    • B. 

      From Disk Management, modify the active partition.

    • C. 

      Run Bootcfg.exe and specify the /default parameter.

    • D. 

      Run Bcdedit.exe and modify the Windows Boot Manager settings.


  • 35. 
    You manage a computer that runs Windows 7. Your company has a corporate intranet website. You open Windows Internet Explorer as shown in the exhibit. You have to make sure that you are able to access Web pages on both the Internet and the intranet. What should you do?
    • A. 

      From the Tools menu, click Work Offline.

    • B. 

      From the Safety menu, click InPrivate Blocking.

    • C. 

      From the Safety menu, click InPrivate Browsing.

    • D. 

      From the Security tab, add the intranet Web site to the Trusted sites zone.


  • 36. 
    You have a wireless access point that is configured to use Advanced Encryption Standard (AES) security. A preshared key is not configured on the wireless access point. You have to connect a computer that runs Windows 7 to the wireless access point. Which security setting should you select for the wireless connection?
    • A. 

      WPA2-Personal.

    • B. 

      802.1x.

    • C. 

      WPA-Personal.

    • D. 

      WPA2-Enterprise.


  • 37. 
    You are in charge of two computers that run Windows 7. The two computers are respectively named Computer1 and Computer2. You have to make sure that you can remotely execute commands on Computer2 from Computer1. What action should you perform?
    • A. 

      Run Winrm quickconfig on Computer2.

    • B. 

      Run Winrm quickconfig on Computer1.

    • C. 

      Enable Windows Remote Management (WinRM) through Windows Firewall on Computer2.

    • D. 

      Enable Windows Remote Management (WinRM) through Windows Firewall on Computer1.


  • 38. 
    You are in charge of two computers named Computer1 and Computer2. Computer1 runs Windows 7 and Computer2 runs Windows XP Professional. On Computer1, you enable Remote Desktop as shown in the Remote Desktop exhibit. What action should you perform?
    • A. 

      On Computer2, assign the Client (Respond Only) IPSec policy.

    • B. 

      On Computer1, add your user account to the Remote Desktop Users group.

    • C. 

      On Computer2, create a firewall exception for the Remote Desktop Protocol (RDP).

    • D. 

      On Computer1, enable the Allow connections from computers running any version of Remote Desktop setting.


  • 39. 
    You are in charge of a computer that runs Windows 7. The computer uses a VPN connection to connect to the corporate network. You have to make sure that you are able to access the Internet when the VPN connection is active. The solution must prevent Internet traffic from being routed through the VPN connection. What action should you perform?
    • A. 

      Configure the advanced TCP/IP settings of the VPN connection.

    • B. 

      Configure a static DNS server address.

    • C. 

      Configure a static IP address and default gateway.

    • D. 

      Configure the security settings of the VPN connection.


  • 40. 
    You are in charge of computer that runs Windows 7 Professional. A USB disk is attached to the computer. You have to make sure that you can enable BitLocker To Go on the USB disk. So what action should you perform to make sure of this?
    • A. 

      Obtain a client certificate from an enterprise certification authority (CA).

    • B. 

      Enable Encrypting File System (EFS).

    • C. 

      Upgrade the computer to Windows 7 Enterprise.

    • D. 

      Initialize the Trusted Platform Module (TPM) hardware.


  • 41. 
    You manage a stand-alone computer which has only one partition. Windows 7 is run by this computer. The computer is shared by two users that are respectively named User1 and User2. User1 uses Encrypting File System (EFS) to encrypt a file. User1 tries to grant User2 access to the file as shown in the exhibit. You have to make sure that User1 are able to grant User2 access to the file. So what action should you perform to make sure of this?
    • A. 

      Instruct User2 to log on to the computer and take ownership of the file.

    • B. 

      Instruct User2 to log on to the computer and encrypt a file.

    • C. 

      Instruct User1 to export the certificate to a certificate (.cer) file.

    • D. 

      Instruct User1 to move the file to a shared folder on the computer.


  • 42. 
    You manage a computer that runs Windows 7. According to the company requirement, the computer needs to be configured to download updates from a local Windows Server Update Services (WSUS) server. What action should you perform to achieve this?
    • A. 

      From Windows Update, modify the Windows Update settings.

    • B. 

      From the local Group Policy, modify the Windows Update settings.

    • C. 

      From the System settings, modify the System Protection settings.

    • D. 

      From the local Group Policy, modify the Location and Sensors settings.


  • 43. 
    You manage a reference computer that runs Windows 7. You are going to create an image of the computer and then have the image deployed to 100 computers. You have to prepare the reference computer for imaging. What action should you perform before you create the image?
    • A. 

      Install the Windows Automated Installation Kit.

    • B. 

      Run the Package Manager.

    • C. 

      Run the System Preparation tool.

    • D. 

      Install the User State Migration Tool.


  • 44. 
    You plan to install Windows 7 by using a Windows 7 DVD. You have to perform an automated installation of Windows 7. What action should you perform?
    • A. 

      Create an answer file named sysprep.inf. Copy the file to a network share.

    • B. 

      Create an answer file named autounattend.xml. Place the file on a removable drive.

    • C. 

      Create an answer file named oobe.xml. Copy the file to a network share.

    • D. 

      Create an answer file named winnt.sif. Place the file on a removable drive.


  • 45. 
    You manage a computer that runs Windows 7. Now you receive an order from the company management. According to the company requirement, you have to prevent Internet Explorer from saving any data during a browsing session. What action should you perform?
    • A. 

      Disable the BranchCache service.

    • B. 

      Modify the InPrivate Blocking list.

    • C. 

      Open an InPrivate Browsing session.

    • D. 

      Modify the security settings for the Internet zone.


  • 46. 
    You are installing a 64-bit edition of Windows 7. During the installation, you receive an error message when you attempt to add a mass storage driver. You need to complete the installation of Windows 7. You start the computer from the Windows 7 installation media. What should you do next?
    • A. 

      From the Install Windows dialog box, click Rescan.

    • B. 

      From the Install Windows dialog box, click Drive Options (Advanced).

    • C. 

      From the Advanced Boot options menu, select Safe Mode.

    • D. 

      From the Advanced Boot options menu, select Disable Driver Signature Enforcement.


  • 47. 
    You have a computer that runs Windows 7. Multiple users share this computer. The computer contains a folder named C:\folder1. You need to identify all the encrypted files in C:\folder1. What command should you run?
    • A. 

      Cipher C:\folder1

    • B. 

      Dir C:\folder1 /OE

    • C. 

      Fsutil C:\folder1

    • D. 

      Wfs C:\folder1


  • 48. 
    Your network consists of a single AD domain named contoso.com. You have a server named Server1 that runs a custom network application. Server1 has the following IP address:192.168.15.10 192.168.15.11You need to ensure that a client computer resolves server1.contoso.com to only the 192.168.15.11 address. What should you do from the computer?
    • A. 

      Edit the hosts file.

    • B. 

      Edit the lmhosts file.

    • C. 

      Run Ipconfig.exe /flushdns.

    • D. 

      Run Netsh interface ipv4 reset


  • 49. 
    You have two portable computers named Computer1 and Computer2 that run Windows 7. You configure Computer1 to connect to a wireless network named Network1. You need to configure Computer2 to connect to Network1 by using the same settings as Computer1. What should you do on Computer1?
    • A. 

      At the command prompt, run Wceutil.exe -es –gr.

    • B. 

      At the command prompt, run Winrs.exe –environment.

    • C. 

      From Windows Firewall and Advanced Security, export the policy.

    • D. 

      From the wireless network properties of Network1, copy the network profile to a USB flash drive.


  • 50. 
    You have two computers named Computer1 and Computer2 that run Windows 7. Computer1 is used to remotely manage Computer2. From Computer1, you need to verify that the Windows Remote Management (WinRM) service started on Computer2. What should you do?
    • A. 

      At the command prompt, run Winrs -r:computer2 query.

    • B. 

      At the command prompt, run Winrm id -remote:computer2.

    • C. 

      From Windows Powershell, run Get -PSSession Computer2.

    • D. 

      From Windows Powershell, run Get -PSSessionConfiguration Computer2.


  • 51. 
    You have a computer that runs WindowsXP. The computer has one partition.You install Windows 7 on the computer. You need to migrate a users profile from the Windows XP installation to Windows 7 installation. What should you do first?
    • A. 

      From Windows 7, run Scanstate.exe /offlineWinOld C:\windows.

    • B. 

      From Windows 7, run Scanstate.exe /offlineWinOld C:\windows.old.

    • C. 

      At the command prompt, run Xcopy /s /e "c:\windows\users\*.*" c:\users.

    • D. 

      At the command prompt, run Xcopy /s /e "c:\windows.old\documents and settings\*.*" c:\users.


  • 52. 
    You have a computer that runs Windows 7. You need to configure image backups to meet the following requirements:- automatically create a system image every day without user intervention- retain multiple copies of the system imageWhat type of backup should you use?
    • A. 

      External hard disk drive

    • B. 

      Network location

    • C. 

      USB flash drive

    • D. 

      Writeable DVD


  • 53. 
    You have 20 client computers. The computers run Windows XP. They are joined in a domain. You plan to perform a clean installation of Windows 7 on the computers. You need to transfer all users documents and settings. You mustexclude music and video files. You must achieve this goal by using the minimum ammount of administrative effort. What shoud you do first?
    • A. 

      Create a config.xml file. Configure a logon script for the Windows XP computers to launch Loadstate.exe.

    • B. 

      Modify the migapp.xml file. Configure a logon script for the Windows XP computers to launch Scanstate.exe.

    • C. 

      Modify the miguser.xml file. Configure a logon script for the Windows XP computers to launch Migwiz.exe.

    • D. 

      Modify the migdocs.xml file. Configure a logon script for the Windows XP computers to launch Scanstate.exe.


  • 54. 
    You have a computer that runs Windows 7 (64-bit). Windows XP mode and VirtualPC are installed on the computer. In the Windows XP mode - Windows Virtual PC, you copy a 16-bit application named App1.exe. You need to ensure that you can run App1.exe by using a shortcut from the Windows 7 Start menu. What should you do?
    • A. 

      From Windows 7, run Start App1.exe /separate.

    • B. 

      From Windows 7, add a shortcut from the Start menu.

    • C. 

      From the Virtual PC, run Start app1.exe /separate.

    • D. 

      From the Virtual PC, add a shortcut to the Start menu.


  • 55. 
    You have a computer that runs Windows 7 and IE8. A user named User1 attempts to access Web page. User1 fails to access a Web page and receives an error message stating that the page does not have a rating. You need to configure Internet Explorer to allow User1 to access Web pages that does not have a rating. What settings should you modify?
    • A. 

      Content Advisor

    • B. 

      InPrivate Filtering

    • C. 

      Parental Controls

    • D. 

      Restricted Sites


  • 56. 
    You have a customized image of Windows 7 Professional. You mount the image and modify the contents of the image. You need to restore the image to its original state. Which tool should you use?
    • A. 

      DISM.exe.

    • B. 

      OCSetup.exe.

    • C. 

      Pkgmgr.exe.

    • D. 

      Sysprep.exe.


  • 57. 
    You have a computer that runs Windows 7. You need to copy files to a VHD file. What should you do first?
    • A. 

      Run DISM.exe and specify the /image and /online parameters.

    • B. 

      Open Windows Explorer, right click the VHD file and select open.

    • C. 

      Run Diskpart.exe and then run the select and attach commands.

    • D. 

      Run ImageX.exe and specify the /mountrw and /append parameters.


  • 58. 
    You plan to deploy 7 to 100 computers on your corporate network. You install Windows 7 on a computer. You need to prepare the computer to be imaged. What should you do before you create the image of the computer.
    • A. 

      At the command prompt, run the DISM command.

    • B. 

      At the command prompt, run the Sysprep command.

    • C. 

      Start the computer from the Windows PE and run ImageX.

    • D. 

      Start the computer from the Windows PE and run Wpeutil command.


  • 59. 
    You have an answer file for a Windows 7 installation. You need to perform an unattended installation of Windows 7 by using the answer file. You must achieve this goal by using the minimum amount of administrative effort. What should you do?
    • A. 

      Name the file autounattend.xml and save to usb disk. Start from Windows 7 DVD.

    • B. 

      Name the answer files autounattend.ini and save it to a usb disk. Start rom Windows 7 DVD.

    • C. 

      Name the answer file unattend.xml and save it to a usb disk. Satart from Windows PE.

    • D. 

      Name the answer file unattend.txt and save it to a usb disk. Start from Windows PE.


  • 60. 
    You attach a mobile device that runs Windows Mobile Professional 6.1 to a computer. You discover that Windows is unable to install the necessary device drivers for the mobile device. You need to ensure that you can synchronize files to the mobile device. What should you do?
    • A. 

      From Windows Mobility Center, click sync settings.

    • B. 

      From Sync Center, click set up new sync partnerships.

    • C. 

      From Device Manager, click scan for hardware changes.

    • D. 

      From Devices and Printers, right click the device and click troubleshoot.


  • 61. 
    You have a computer that runs Windows 7. You need to provide standard users the ability to update the drivers for display adapters. What should you modify from the Local Group Policy?
    • A. 

      Device installation settings for the computers.

    • B. 

      Display settings for the users.

    • C. 

      Driver installation settings for the computer.

    • D. 

      Driver installation settings for the user.


  • 62. 
    Your network contains 100 computers that run Windows XP. You need to identify which applications installed on all of the computers can run Windows 7. You must achieve this goal by using the minimum amount of administrative effort. What should you install?
    • A. 

      Microsoft Application Compatibiltiy Toolkit (ACT).

    • B. 

      Microsoft Assessment and Planning (MAP) Toolkit.

    • C. 

      Microsoft Deployment Toolkit (MDT).

    • D. 

      Windows Automated Installation Kit (AIK).


  • 63. 
    You have a computer that runs Windows Vista. The computer has one partition and 1 GB of RAM. You need to upgrade the computer to Windows 7. What should you do first?
    • A. 

      Add 1 GB of RAM.

    • B. 

      Create a second partition.

    • C. 

      Disable User Account Control (UAC).

    • D. 

      Install Windows Vista Service Pack 2.


  • 64. 
    A user reports that he is unable to start his computer. He provides the following information:- The boot partition is encrypted by using BitLocker Drive Encryption.-  Cannot locate BitLocker Recover keyYou need to start Windows 7 on the computer. The solution must use the minimum amount of administrative effort. What should you do?
    • A. 

      From the BIOS, disable the Trusted Platform Module (TPM).

    • B. 

      Start computer from Windows 7 installation media and select install now.

    • C. 

      Start computer from Windows 7 installation media and select repair your computer.

    • D. 

      Start the computer from Windows 7 installation media, press Shift F10, and then run CHKDSK.


  • 65. 
    You have a computer that runs Windows 7. Your network contains a DHCP server that runs Windows Server 2008 R2. The server is configured as a Network Access Protection (NAP) Enforcement Point. You need to configure the computer as a NAP Client. Which two actions should you perform?
    • A. 

      From Services, set the Netlogon Service Startup Type to Automatic.

    • B. 

      From Services, set the Network Access Protection Agent Startup Type to Automatic.

    • C. 

      From the NAP Client Configuration Console, configure the user interface settings.

    • D. 

      From the NAP Client Configuration Console, enable the DHCP Quarantine Enforcement client.


  • 66. 
    You have a portable computer named Computer1 that runs Windows 7. A server named Server2 contains the Share1 directory. You need Computer1 to meet the following requirements:- Minimize network traffic between the main office and branch office.- Ensure that Computer1 can only access resources in Share1.What should you do?
    • A. 

      On Computer1, enable offline files.

    • B. 

      On Computer1, enable transparent caching.

    • C. 

      On Server1, configure Direct Access.

    • D. 

      On Server1, configure Share1 to be available offline.


  • 67. 
    You have a computer that runs Windows XP and a USB drive that is protected by using BitLocker To Go. You need to ensure that you can copy files from the computer to the USB drive. The solution must retain the existing files on the USB drive. What should you do?
    • A. 

      From the computer that runs Windows 7, change the file system of the USB drive.

    • B. 

      From the computer that runs Windows 7, disable BitLocker To Go for the USB drive.

    • C. 

      Log onto Windows XP as a member of the Administrators group.

    • D. 

      Log onto Windows XP by using a EFS Certificate Account.


  • 68. 
    You have a computer that runs Vista with SP2. You need to upgrade the computer to Windows 7. What should you do?
    • A. 

      Upgrade to Windows Vista SP2. From the Windows 7 installation media, run Setup.exe and select the Upgrade option.

    • B. 

      Upgrade to Windows Vista SP2. From the Windows 7 installation media, run Setup.exe and select the Custom (advanced) option.

    • C. 

      Install Windows XP Service Pack 3 (SP3). Run Setup.exe from the Windows 7 installation media and select the Upgrade option.

    • D. 

      Install Windows XP Service Pack 3 (SP3). Run Setup.exe from the Windows 7 installation media and select the Custom (advanced) option.


  • 69. 
    Your computer has the following hardware:- 1.6 GHz processor (64-bit)- 8 GB RAM- 500 GB Hard Drive- 129 Mb RAM graphic cardYou need to install a Windows 7 version that meets the following:- Supports DirectAccess- Windows XP Mode- Uses all MemoryWhat version should you install?
    • A. 

      Windows 7 Enterprise (64-bit)

    • B. 

      Windows 7 Enterprise (x86)

    • C. 

      Windows 7 Professional (64-bit)

    • D. 

      Windows 7 Ultimate (x86)


  • 70. 
    You have a Windows Vista computer. You need to identify if it will run Windows 7. What tool should you use?
    • A. 

      Windows Anytime Upgrade for Windows 7.

    • B. 

      Windows Anytime Upgrade for Vista.

    • C. 

      Windows 7 Upgrade Advisor.

    • D. 

      Windows Vista Upgrade Advisor.


  • 71. 
    You plan to install a third party application on Drive C. You need to be able to recover in the event of a problem. What should you do?
    • A. 

      Create a system image.

    • B. 

      Create a system restore point

    • C. 

      Create a backup by using wbadmin.

    • D. 

      Create a Windows Easy Transfer file.


  • 72. 
    You need to reduce the amount of space used by storing system restore points. What should you do?
    • A. 

      Run disk cleanup.

    • B. 

      Run msconfig.exe.

    • C. 

      Configure disk quotas.

    • D. 

      Configure Windows backup.


  • 73. 
    You have a computer that runs Windows 7 and uses the Windows Backup. You create a new NTFS partition. You need to configure the Windows Backup to include the new partition. What should you do?
    • A. 

      From Backup and Restore, select change settings

    • B. 

      From Backup and Restore, select create an image.

    • C. 

      From System Protection tab, create a restore point.

    • D. 

      From System Protection tab, enable system protection for the new volume.


  • 74. 
    You have a Windows Image (WIM) file that is 2 GB. You need to ensure that you can copy the file to a CD. What should you do?
    • A. 

      Run Imagex.exe and specify the /split parameter.

    • B. 

      From properties, enable compression.

    • C. 

      Run DISM /cleanup-win parameter.

    • D. 

      Compress the WIM file.


  • 75. 
    You have a Windows 7 Windows Image (WIM) that is mounted. You need to view the list of third-party drivers installed on the WIM. What should you do?
    • A. 

      Run DISM and specify /get-drivers parameter.

    • B. 

      Run Driverquery.exe and use /si parameter.

    • C. 

      From Device Manager, view all hidden drivers.

    • D. 

      From Windows Explorer, open the mount folder.


  • 76. 
    You deploy a Windows 7 Enterprise image to a computer on the network. You need to display the detailed activation and license status of the computer. What should you do?
    • A. 

      Msconfig.exe.

    • B. 

      Slui.exe.

    • C. 

      Slmgr.vbs and specify the dli parameter.

    • D. 

      Winrm.vbs and specify the id parameter.


  • 77. 
    You have a computer that runs Windows 7. Your network has a SSTP VPN server that uses a self-signed certificate. When you connect to the VPN server, you receive the following error message: “Your computer does not trust the issuing certification authority (CA) of the SSTP VPN server’s certificate.” You need to prevent the error messge from appearing when you connect to the VPN server. What should you do?
    • A. 

      From the properties of the VPN connection, modify the dialing options.

    • B. 

      From the properties of the VPN connection, modify the data encryption settings.

    • C. 

      From Certificate Manager, import the server’s certificate into the Personal store.

    • D. 

      From Certificate Manager, import the server’s certificate into the Trusted Root Certification Authorities store.


  • 78. 
    You have a computer that runs Windows 7. You connect to your company’s network by using a VPN connection. You discover that when you establish the VPN connection, you are unable to access Internet web sites. When you disconnect the VPN connection, you can access Internet Web sites. You need to access Internet Web sites while you are connected to the VPN. What should you do?
    • A. 

      Configure the VPN connection to use only PPTP.

    • B. 

      Configure the VPN connection ot use only L2TP/IPSec.

    • C. 

      From the Internet Protocol Version 4 (TCP/IPv4) properties of the local area connection, disable the Automatic metric setting.

    • D. 

      From the Internet Protocol Version 4 (TCP/IPv4) properties of the VPN connection, disable the Use default gateway on remote networks setting.


  • 79. 
    You plan to install Windows 7 on a computer that contains a single hard disk drive. The hard disk drive is connect to a RAID controller. During the installation, you discover that the Windows 7 installation media does not include the files required to install the RAID controller. You need to ensure that you can install Windows 7 on the hard disk drive. What should you do?
    • A. 

      Insert the Windows installation media and press F8 during the computer’s power-on self test (POST).

    • B. 

      Insert the Windows installation media and press F6 during the computer’s power-on self test (POST).

    • C. 

      Start the computer from the Windows installation media. From the Install Windows dialog box, click Load Driver.

    • D. 

      Start the computer from the Windows installation media. From the Install Windows dialog box, click Drive options (advanced).


  • 80. 
    You have two computers named Computer1 and Computer2. Computer1 runs Windows Vista. Computer2 runs Windows 7. Computer1 has a custom application installed. You create a custom XML file named App1.xml that contains the migration settings for the application. You need to migrate the configuration and application data for the custom applicaton from Computer1 to Computer2. What should you do?
    • A. 

      On Computer1, run Loadstate.exe /i:app1. On Computer2, run Scanstate.exe /i:app1.xml.

    • B. 

      On Computer1, run Scanstate.exe /i:app1.xml. On Computer2, run Loadstate.exe /i:app1.xml.

    • C. 

      On Computer1, run Loadstate.exe /keyfile:app1.xml. On Computer2, run Loadstate.exe /keyfile:app1.xml.

    • D. 

      On Computer1, run Scanstate.exe /genconfig:app1.xml. On Computer2, run Loadstate.exe /config:app1.xml.


  • 81. 
    You have a computer that contains a DVD drive and a single 350-GB hard disk drive. You attempt to install Windows 7 on a computer using the DVD installation media and receive the following error message: “Reboot and Select proper Boot device or Insert Boot Media in selected Boot device.” You need to ensure that you can install Windows 7 on the computer by using the DVD installation media. What should you do?
    • A. 

      From the BIOS, modify the startup order.

    • B. 

      From the BIOS, enable Pre-Boot Execution Environment (PXE).

    • C. 

      Create an answer file named oobe.xml and place the file on the hard disk drive.

    • D. 

      Create an answer file named autounattend.xml and place the file on the hard disk drive.


  • 82. 
    You have two computers named Computer1 and Computer2. You migrate user state data from Computer1 to Computer2. The migrated data contains several Microsoft Office Excel files. You need to ensure that you can open the Excel files by using Excel on Computer2. What should you do?
    • A. 

      Install Office.

    • B. 

      Disable User Account Control (UAC).

    • C. 

      Modify the default program settings.

    • D. 

      Run Loadstate.exe /i:migapp.xml.


  • 83. 
    You have a computer that runs Windows 7. You update the driver for the computer’s video card and the computer becomes unresonsive. You need to recover the computer in the minimum amount of time. What should you do?
    • A. 

      Restart in safe mode and then roll back the video card driver.

    • B. 

      Restart in safe mode and then revert the computer to a previous restore point.

    • C. 

      Start the computer from the Windows 7 installation media. Select Repair your computer and then select System Restore.

    • D. 

      Start the computer from the Windows 7 installation media. Select Repair your computer and then select System Image Recovery.


  • 84. 
    You are preparing a custom Windows 7 image for deployment. You need to install a third-party network inteface card (NIC) driver in the image. What should you do?
    • A. 

      Run Pkgmgr.exe and specify the /ip parameter.

    • B. 

      Run Dism.exe and specify the /add-driver parameter.

    • C. 

      Create a new answer file by using Windows System Image Manager (Windows SIM). Run Pkgmgr.exe and specify the /n parameter.

    • D. 

      Create a new answer file by using Windows System Image Manager (Windows SIM). Run Dism.exe and specify the /apply-unattend parameter.


  • 85. 
    You plan to deploy Windows 7 by using a virtual hard disk (VHD). You need to ensure that when a computer starts from the VHD, the Windows 7 installation programs will run the out-of-box-experience (OOBE) portion of the setup. What should you do?
    • A. 

      Copy install.wim from the Windows 7 installation media to the VHD.

    • B. 

      Use ImageX to apply install.wim from the Windows 7 installation media to the VHD.

    • C. 

      Start the computer by using the Windows 7 installation media and then select Install now.

    • D. 

      Start the computer by using the Windows Preinstallation Environment (Windows PE) and then run Diskprep.exe.


  • 86. 
    You need to configure a computer to encrypt all inbound connections by using IPSec. What should you do?
    • A. 

      From Network and Sharing Center, click Connect to a network.

    • B. 

      From Netwrok and Sharing Center, click Set up a new connection or network

    • C. 

      From Windows Firewall with Advanced Security, click Inbound Rules and then click New Rule.

    • D. 

      From Windows Firewall with Advanced Security, click Connection Security Rules and then click New Rule.


  • 87. 
    Your network consists of a single IPv4 subnet. The subnet contains 20 computers that run Windows 7. You add a new computer named Computer1 to the subnet. You discover that Computer1 has an IP address of 169.254.14.17. You cannot connect to other computers on the network. Other computers on the network can connect to each other. You need to ensure that you can connect to all computers on the network. What should you do?
    • A. 

      Turn off Windows Firewall.

    • B. 

      Run ipconfig.exe /renew.

    • C. 

      Configure a static TCP/IP address.

    • D. 

      Run Netsh.exe interface ipv4 install.


  • 88. 
    You have two computers named Computer1 and Computer2 that run Windows 7. You use Remote Desktop to connect from Computer1 to Computer2. You need to prevent the desktop background of Computer2 from being displayed when you use Remote Desktop to connect to Computer2. What should you do on Computer1.
    • A. 

      From the Personalization options, change the theme.

    • B. 

      From the System properties, modify the Remote settings.

    • C. 

      From the Remote Desktop Connection options, modify the Performance setting.

    • D. 

      From the Remote Desktop Connection options, modify the Display configuration settings.


  • 89. 
    You have two computers named Computer1 and Computer2 that run Windows 7. Computer2 is configured for remote management. From Computer1, you need to remotely execute a third-party command line tool named disk.exe on Computer2. Which command should you run?
    • A. 

      Start “disk.exe” /d\\computer2.

    • B. 

      Tscon disk.exe /DEST:computer2.

    • C. 

      Winrm e disk.exe –r:computer2.

    • D. 

      Winrs –r:computer2 disk.exe.


  • 90. 
    You need to create a VPN connection. What should you do?
    • A. 

      From Windows Explorer, right-click Computer then click Map network drive.

    • B. 

      From Windows Explorer, right-click Computer and then click Add a network location.

    • C. 

      From Network and Sharing Center, click Set up a new connection to network and then click Set up a new network.

    • D. 

      From Network and Sharing Center, click Set up a new connection to netork and then click Connect to a workplace.


  • 91. 
    You have a computer named Computer1 that runs Windows 7. Computer1 is a member of an Active Dirctory domain. Remote Desktop is enabled on the computer. You share a folder on Computer1. You need to configure Computer1 to meet the following requirements:- Allow computers in the local subnet to access the shared folder.- Prevent computers in remote subnets from accessing the shared folder.- Allow all computers to connect to Computer1 by using Remote Desktop.What should you do?
    • A. 

      Modify the subnet mask.

    • B. 

      Modify the Public folder sharing settings.

    • C. 

      Disable network discover of all computers located in remote subnets.

    • D. 

      Modify the properties of the File and Printer Sharing firewall exceptions.


  • 92. 
    You install a local printer on a computer. You share the printer. You need to ensure that only members of a local group named Group1 can print documents on the printer. Which settings should you modify on the printer?
    • A. 

      Printing preferences.

    • B. 

      Priority.

    • C. 

      Security.

    • D. 

      Share.


  • 93. 
    Your company has an internal Web site that requires HTTPS. The web site’s certificate is self-signed. You have a computer that runs Windows 7 and Windows Internet Explorer 8. You use HTTPS to browse to the Web site and receive the following warning message: “There is a problem with this website’s security certificate.” You need to prevent the warning message from appearing when you access the Web site. What should you do?
    • A. 

      From Internet Explorer, enable InPrivate Browsing.

    • B. 

      From Internet Explorer, add the Web site to the Trusted site zone.

    • C. 

      From Certificate Manager, import the Web site’s certificate into your Personal store.

    • D. 

      From Certificate Manager, import the Web site’s certificate into your Trusted Root Certification Authorities store.


  • 94. 
    You have two computers that run Windows 7. Both computers are connected to a network and have IP addresses within the 172.16.10.0/24 subnet. You need to ensure that both computers can join a HomeGroup. What should you do?
    • A. 

      Enable network discovery.

    • B. 

      Set the network location to Home network.

    • C. 

      Configure Windows Firewall to allow the Netlogon service.

    • D. 

      Change the IP address to be within the 192.168.1.0/24 subnet.


  • 95. 
    Your network has a main office and a branch office. The branch office has five client computers that run Windows 7. All client computers are configured to use BranchCache. At the branch office, a computer named Computer1 is experiencing performance issues. You need to temporarily prevent all computers from retrieving cached content from Computer1. What should you do on Computer1?
    • A. 

      At the command prompt, run Netsh branchcache flush.

    • B. 

      At the command prompt, run Netsh branchcache dump.

    • C. 

      Modify the Configure BranchCache for network files Group Policy setting.

    • D. 

      Modify the Set percentage of disk space used for client comoputer cache Group Policy setting.


  • 96. 
    A user named User1 uses a shared computer that runs Windows 7. User1 is a member of a group named Group1. The computer contains a folder named Folder1. You need to configure the permissions on Folder1 to meet the following requirements:- User1 must be allowed to delete all files in Folder1.- Members of Group1 must be able to create files in Folder1.- All other members of Group1 must be prevented from deleting files they dis not create in Folder1.-  All users must be prevented from modifying the permissions on Folder1.What should you do?
    • A. 

      Assign Group1 the Write permission. Assign User1 the Modify permission.

    • B. 

      Assign Group1 the Modify permission. Assign User1 the Write permission.

    • C. 

      Deny Group1 the Write permission. Assign User1 the Modify permission.

    • D. 

      Deny Group1 the Modify permission. Assign User1 the Write permission.


  • 97. 
    You have a computer that runs Windows 7. Four users share the computer. You create a folder named C:\data. The Users group has full control permission to the folder. You need to configure security on the folder to meet the following requirements:- Allow users to create files.- Allow users to delete files that they create.- Prevent users from deleting files created by other users.What should you do?  
    • A. 

      Remove all NTFS permissions from the Users group and assign the CREATOR OWNER group the Full control NTFS permission.

    • B. 

      Remove the Modify NTFS permission from the Users group and assign the CREATOR OWNER group the Modify NTFS permission.

    • C. 

      Deny the Users group the Modify NTFS permission and assign the Authenticated Users group the Read and Write NTFS permissions.

    • D. 

      Deny the Users group the Full control NTFS permission and assign the Authenticated Users group the Read & execute NTFS permissions.


  • 98. 
    You have a computer named Computer1 that runs Windows 7. You need to configure Computer1 to support the collection of Windows system events from other computers. What command should you run?
    • A. 

      Wecutil.exe qc.

    • B. 

      Winrm.exe quickconfig.

    • C. 

      Winrs –r:Computer1.

    • D. 

      Wmic /aggregate.


  • 99. 
    You need to increase the size of the paging file. What should you do?
    • A. 

      From Disk Management, shrink the boot partition.

    • B. 

      From Disk Management, shrink the system partition.

    • C. 

      From System, modify the Advanced system settings.

    • D. 

      From System, modify the System protection settings.


  • 100. 
    You have a computer that runs Windows 7. The computer is configured to use an intranet Microsoft update service location. You need to view the name of the intranet service location. What should you do?
    • A. 

      At a command prompt, run Wusa.exe.

    • B. 

      Open Event Viewer and examine the Application log.

    • C. 

      Open Windows Update and click View update history.

    • D. 

      Review the contents of the C:\windows\windowsupdate.log file.


  • 101. 
    You have a computer that runs Windows 7. The computer contains one hard disk. The hard disk is configured as shown in the following table. You install a new 250-GB hard disk in the computer. You need to ensure that all the files on the computer are available if a single disk fails. What should you do?
    • A. 

      Create a mount point on C and D and then create a striped volume.

    • B. 

      Create a mount point on C and D and then create two striped volumes.

    • C. 

      Convert both disks to dynamic disks and then create a mirrored volume.

    • D. 

      Convert both disks to dynamic disks and then create two mirrored volumes.


  • 102. 
    You have a computer named Computer1 that runs Windows 7. Computer1 uses an NTFS-formatted USB drive that has ReadyBoost enabled. You need to modify the amount of space that ReadyBoost reserves on the USB drive. What should you do?
    • A. 

      Open Computer and modify the properties of the USB drive.

    • B. 

      Open Performance Information and Tools and run disk cleanup.

    • C. 

      Open Devices and Printers and modify the properties of the USB drive.

    • D. 

      Open Decive Manager and modify the properties of the USB device.


  • 103. 
    You have two computers named Computer1 and Computer2 that run Windows 7. Both computers are members of an Active Directory domain. Windows Remote Management (WinRM) is enabled on both computers. You need to remotely create additional disk volumes on Computer1 from Computer2. What should you do?
    • A. 

      On Computer2, run Winrs and then run Diskpart.

    • B. 

      On Computer2, run Winrs and then run Diskmgmt.msc.

    • C. 

      On Computer1, install the Telnet Client and then run Diskpart from Computer2.

    • D. 

      On Computer1, install the Telnet Client and then use Disk Management from Computer2.


  • 104. 
    You have a computer that runs Windows 7. A user installs a third-party media player on the computer. You discover that all media files automatically open by using the third-party media player. You need to ensure that all media files open automatically by using Windows Media Player. You must achieve this goal by using the minimum amount of administrative effort. What should you do?
    • A. 

      Select a media file. Right-click the file and select Open with.

    • B. 

      Select a media file. Right-click the file and select Restore previous versions.

    • C. 

      From Control Panel, modify the Set your default programs settings.

    • D. 

      From Control Panel, modify the Set program access and computer defualt settings.


  • 105. 
    You have a computer that runs Windows 7. You install a third-party Web browser. You discover that the HTML files are no longer associated with Windows Internet Explorer. You need to ensure that Internet Explorer starts whenever a HTML file is opened. What should you do from Internet Options?
    • A. 

      Open the Connections tab and click Setup.

    • B. 

      Open the General tab and click Use default.

    • C. 

      Open the Programs tab and click Make default.

    • D. 

      Open the Programs tab and click Manage add-ons.


  • 106. 
    You have a computer that runs Windows 7. The computer is joined to a domain. You need to ensure that only approved USB drives can be used on the computer. Which two policy settings should you configure? (Each correct answer presents part of the solution. Choose two.)
    • A. 

      Enable Prevent installation of removable devices.

    • B. 

      Enable Prevent installation of devices not described by other settings.

    • C. 

      Enable Prevent installation of devices that match any of these device IDs and enter the device ID for the approved USB drives.

    • D. 

      Enable Allow installation of devices that match any of these device IDs and enter the device ID for the approved USB drives.


  • 107. 
    You have a Windows 7 computer that is a member of a workgroup. You need to prevent members of a local group from starting a specific application. You must achieve this goal by using the minimum amount of administrative effort. What should you create?
    • A. 

      Administrative template

    • B. 

      Application control policy

    • C. 

      IPSec policy

    • D. 

      Software restriction policy


  • 108. 
    Your network contains computers that run either Windows Vista (x86) or Windows 7 (x86). All computers are joined to a domain. You install a computer named Computer1 that runs Windows 7 (64-bit). You share a printer named Printer1 on Computer1. You need to ensure that any user can automatically download and install the print drivers for Printer1. What should you do from Printer Properties?
    • A. 

      Install a new driver.

    • B. 

      Enable bidirectional support.

    • C. 

      Modify the Additional Drivers settings.

    • D. 

      Assign the Manage this printer permission to the Domain Users group.


  • 109. 
    You have a computer that runs Windows 7. You need to view the processes that currently generate network activity. What should you do?
    • A. 

      Open Resource Monitor and click the Network tab.

    • B. 

      Open Windows Task Manager and click the Networking tab.

    • C. 

      Open Event Viewer and examine the NetworkProfile Operational log.

    • D. 

      Open Performance Monitor and add all the counters for network interface.


  • 110. 
    You have a computer that runs Windows 7. The computer contains two volumes, C and D. You create a new folder called D:\Reports. You need to ensure that all files stored in the Reports folder are indexed by Windows Search. What should you do?
    • A. 

      Enable the archive attribute on the folder.

    • B. 

      Modify the Folder Options from Control Panel.

    • C. 

      Modify the properties of the Windows Search service.

    • D. 

      Create a new library and add the Reports folder to the library.


  • 111. 
    You have a new computer that does not have an operating system installed. You have a virtual hard disk (VHD) that contains an installation of Windows 7. You start the computer from the Windows Preinstallation Environment (Windows PE). You create a partition on the computer and copy the VHD to the partition. You need to configure the computer to start from the VHD. Which tools should you use?
    • A. 

      Diskpart.exe and Bcdboot.exe

    • B. 

      Imagex.exe and Bcdedit.exe

    • C. 

      Scanstate.exe and Loadstate.exe

    • D. 

      Wpeutil.exe and Dism.exe


  • 112. 
    You have a computer that runs Windows 7. Your company has three custom applications named app1.exe, app2.exe, and app3.exe. The applications have been digitally signed by the company. You need to create a policy that allows only applications that have been digitally-signed by the company to run. What should you create?
    • A. 

      An AppLocker executable rule

    • B. 

      An AppLocker Windows Installer rule

    • C. 

      A software restriction policy and a certificate rule

    • D. 

      A software restriction policy and a hash rule


  • 113. 
    Your network consists of an Active Directory domain named contoso.com. You have a computer named computer1.contoso.com. Your network is configured to use only IPv6. You need to request that a DNS record be created to enable users to connect to your computer by using the name dev.contoso.com. Which type of record should you request?
    • A. 

      A

    • B. 

      AAAA

    • C. 

      HINFO

    • D. 

      NAPTR


  • 114. 
    Your network has a main office and a branch office. The branch office has five client computers that run Windows 7. All servers are located in the main office. All servers have BranchCache enabled. Users at the branch office report that it takes several minutes to open large files located in the main office. You need to minimize the amount of time it takes for branch office users to open files located in the main office. The solution must also reduce the amount of bandwidth used between the two offices. What should you do?
    • A. 

      At the main office, configure the Quality of Service (QoS) Packet Scheduler on all servers.

    • B. 

      At the main office, configure the servers to use Background Intelligent Transfer Service (BITS).

    • C. 

      At the branch office, configure the client computers to use BranchCache Hosted Cache mode.

    • D. 

      At the branch office, configure the client computers to use BranchCache Distributed Cache mode.


  • 115. 
    You have a computer that runs Windows 7. You create an Encrypting File System (EFS) recovery key and certificate.  You need to ensure that your user account can decrypt all EFS files on the computer. What should you do?
    • A. 

      From Credential Manager, add a Windows credential.

    • B. 

      From Credential Manager, add a certificate-based credential.

    • C. 

      From the local computer policy, add a data recovery agent.

    • D. 

      From the local computer policy, modify the Restore files and directories setting.


  • 116. 
    You have a portable computer that runs Windows 7. You configure the computer to enter sleep mode after 10 minutes of inactivity. You do not use the computer for 15 minutes and discover that the computer has not entered sleep mode. You need to identify what is preventing the computer from entering sleep mode. What should you do?
    • A. 

      At a command prompt, run Powercfg -energy.

    • B. 

      At a command prompt, run Systeminfo /s localhost.

    • C. 

      From Performance Monitor, review the System Summary.

    • D. 

      From Performance Information and Tools, review the detailed performance and system information.


  • 117. 
    You have a computer that runs Windows 7. Your network contains a VPN server that runs Windows Server 2008. You need to authenticate to the VPN server by using a smart card. Which authentication setting should you choose?
    • A. 

      CHAP

    • B. 

      EAP

    • C. 

      MS-CHAP v2

    • D. 

      PAP


  • 118. 
    A user wants to install the games included with Windows 7 on his PC. They were not installed by default. Windows components can be added or removed using which of the following in Windows 7.
    • A. 

      Click the Start Bar, Control Panel, Add/Remove Programs, and click Windows Components.

    • B. 

      Click the Start Bar, Control Panel, Programs, then click Turn Windows features on or off

    • C. 

      Click the Start Bar, Settings, Windows Control Center.

    • D. 

      Right click the "My Computer" icon, Choose Properties, Choose Computer Management, on the left pane choose Add Remove Windows Components.


  • 119. 
    You are installing Windows 7 on from the desktop of a Windows XP Professional PC. Which of the following can be performed from the Windows 7 DVD? Choose three.
    • A. 

      Run setup.exe from the DVD to start the Windows 7 installation.

    • B. 

      Use the autorun feature on the DVD to start the installation.

    • C. 

      Perform a full installation of Windows 7.

    • D. 

      Perform and upgrade of Windows 7 keeping all the Windows XP settings.


  • 120. 
    Federated Search connectors are installed using what method?
    • A. 

      Purchase the Federated Search Installation Tool Pack online and buying individual search connectors from websites.

    • B. 

      Download an .osdx file from a valid source. Double click on the downloaded file and choose Add to install.

    • C. 

      Go to Microsoft's website. Only vendors who have signed up with the Microsoft Federated Search Tool Writers Guild can participate.

    • D. 

      Go to Amazon.com and download the Shared Resource Kit for Federated Searches.


  • 121. 
    Which of the following is not a volume type usable by Windows 7?
    • A. 

      FAT

    • B. 

      ExFAT

    • C. 

      NTFS

    • D. 

      All of the above a volume types in Windows 7.


  • 122. 
    The Aero Shake feature will work if which of the following conditions are met? Choose Two.
    • A. 

      A display adapter compatible with WDDM is installed.

    • B. 

      Aero features are downloaded from Microsoft.

    • C. 

      The windows experience index is at least 2.

    • D. 

      The Windows Experience Index is 3 or greater.


  • 123. 
    You manage a computer that runs Windows 7. You are tasked to identify which applications were installed during the last week. What Windows component would you use to find this information? Choose two.
    • A. 

      Check the Windows System Change Log in the Control Panel.

    • B. 

      View the events in the Applications Log under Windows Logs in the System and Security component section of the Control Panel.

    • C. 

      The informational events should be reviewed from Reliability Monitor.

    • D. 

      Check the Windows System Diagnostics Report under the Performance Monitor MMC.


  • 124. 
    All the games including Titan Chess come with which versions of Windows 7? Choose two.
    • A. 

      Windows Home Edition

    • B. 

      Windows Professional Edition

    • C. 

      Windows Ultimate Edition

    • D. 

      Windows Enterprise Edition


  • 125. 
    Which of the following Windows 7 Editions allows you to join an Active Directory domain? Choose three.
    • A. 

      Windows Home Edition

    • B. 

      Windows Professional Edition

    • C. 

      Windows Ultimate Edition

    • D. 

      Windows Enterprise Edition


  • 126. 
    Which of the following is not a minimum requirement to install Windows 7?
    • A. 

      1 GHz or faster 32-bit (x86) or a 64-bit (x64) processor

    • B. 

      4GB RAM (32-bit)/2 GB RAM (64-bit)

    • C. 

      16 GB available disk space (32-bit)/20 GB (64-bit)

    • D. 

      DirectX 9 graphics processor with WDDM 1.0 or higher driver.


  • 127. 
    Which of the following is not a rating for games in Windows 7?
    • A. 

      General Audience (G)

    • B. 

      Everyone (E)

    • C. 

      Teen (T)

    • D. 

      Adults Only (AO)


  • 128. 
    In Windows 7 you can control when users such as kids can login to Windows 7. Which of the following best describes where to configure this option?
    • A. 

      You cannot choose this feature unless you are connected to a domain.

    • B. 

      Go to the Start, Control Panel, User Accounts and Family Safety, Setup Parental Controls, and then choose Time Restrictions.

    • C. 

      Go to Start, Control Panel. User Profiles, and then Time Restriction Settings.

    • D. 

      Go to the Homegroup settings and choose Offline Time Settings.


  • 129. 
    Which of the following best describes how the user is alerted with information system and configuration alerts?
    • A. 

      A popup occurs and the Windows 7 desktop contrast is dimmed. Until you acknowledge the alert the screen will not move.

    • B. 

      If Aero is installed the shaking alert flag appears in the index bar of every open window.

    • C. 

      A flag in the taskbar with a red "x" indicates there is a problem needing attention.

    • D. 

      All of the above


  • 130. 
    Which of the following is true of Windows 7?
    • A. 

      MailCentral is included as the new default mail client with Windows 7.

    • B. 

      Outlook Express is included with Windows 7.

    • C. 

      Microsoft Outlook is included with Windows 7.

    • D. 

      There is no preinstalled mail client included with Windows 7.


  • 131. 
    Which of the following is used to control when the security pop-up notifications are used?
    • A. 

      Security Control Manager

    • B. 

      User Account Control

    • C. 

      User Access Control Panel

    • D. 

      Notification Control Settings Manager


  • 132. 
    Which of the following is not a Windows PE tool?
    • A. 

      Diskpart

    • B. 

      Oscdimg

    • C. 

      Winpeshl

    • D. 

      None of the above.


  • 133. 
    Which of the following can be used to increase the physical memory on your Windows 7 PC and increase the speed?
    • A. 

      PhysiRAM

    • B. 

      Aero Glass

    • C. 

      DirectAccess

    • D. 

      ReadyBoost


  • 134. 
    Which of the following will cause the Online Compatibility Check to fail during a Window 7 installation? Choose two.
    • A. 

      512MB of RAM

    • B. 

      A display adapter with WDDM Support

    • C. 

      A display adapter without WDDM Support but with SVIDEO

    • D. 

      An 80 GB Hard Disk


  • 135. 
    To which of the following versions and editions of Windows 7 can you directly upgrade a computer running Windows Vista Enterprise (x86)?
    • A. 

      Windows 7 Home Professional (x86).

    • B. 

      Windows 7 Ultimate (x86)

    • C. 

      Windows 7 Ultimate (x64)

    • D. 

      Windows 7 Enterprise (x64)


  • 136. 
    In which of the following scenarios must you perform a migration rather than an upgrade? Choose three
    • A. 

      Windows XP Professional (x64) to Windows 7 Professional (x64)

    • B. 

      Windows Vista Business (x86) to Windows 7 Professional (x64)

    • C. 

      Windows Vista Enterprise (x64) to Windows 7 Enterprise (x64)

    • D. 

      Windows Vista Home Premium (x64) to Windows 7 Home Premium (x86)


  • 137. 
    A user has a home computer with a cable Internet connection and no other computers on his home network. Which of the following methods can this person use to upgrade from Windows 7 Home Premium to Windows 7 Ultimate?
    • A. 

      Sysprep

    • B. 

      Windows PE

    • C. 

      WDS

    • D. 

      Windows Anytime Upgrade


  • 138. 
    Which of the following operating systems support an offline migration using USMT? Choose three
    • A. 

      Windows 2000 Professional

    • B. 

      Windows XP Professional

    • C. 

      Windows Vista

    • D. 

      Windows 7


  • 139. 
    Which of the following utilities can you use to transfer user encryption certificates from a computer running Windows XP Professional to Windows 7 Professional? Choose two.
    • A. 

      File Settings and Transfer Wizard

    • B. 

      USMT

    • C. 

      Windows Easy Transfer

    • D. 

      Robocopy.exe


  • 140. 
    You are creating an unattend answer file for automatic Windows 7 installation. What can you use to do this? Choose two.
    • A. 

      The Windows SIM tool in Windows AIK

    • B. 

      Microsoft Notepad

    • C. 

      The Deployment Workbench MDT tool

    • D. 

      Sysprep.exe


  • 141. 
    Which Windows Setup configuration pass applies settings to Windows 7 before Windows Welcome starts?
    • A. 

      OobeSystem

    • B. 

      AuditSystem

    • C. 

      Specialize

    • D. 

      OfflineServicing


  • 142. 
    You want to create a 20-GB native VHD called Systemvhd in a folder called Windows 7 on an external U hard disk with the drive designation G:. Which command do you use?
    • A. 

      Create vdisk file=g:\windows7\systemvhd maximum=20000

    • B. 

      Create vdisk file=g:\windows7\systemvhd.vhd maximum=20000

    • C. 

      Create vdisk file=g:\windows7\systemvhd.vhd maximum=20

    • D. 

      Create vdisk file=g:\windows7\systemvhd maximum=20


  • 143. 
    You are configuring static IPv4 addresses for two computers, Perth and Brisbane, on an isolated private wired subnet. You configure Perth with the IPv4 address 172.16.10. 140 and the subnet mask 255.255.255.0. You configure Brisbane with the IPv4 address 172.16.10. 210 and the subnet mask 255.255.255.0. You enter ping 172.16.10.140 on Brisbane, but the command times out. Similarly, entering ping 172.16.10.210 on Perth fails to locate the Brisbane computer's IPv4 address. What is the likely reason for this lack of connectivity?
    • A. 

      DNS service is not available on the subnet.

    • B. 

      The computers should have different subnet masks

    • C. 

      You have not specified a default gateway.

    • D. 

      You need to permit ICMPv4 traffic through the firewalls of both computers


  • 144. 
    You want to prohibit read, write, and execute access to all types of external storage devices. What computer policy setting do you enable?
    • A. 

      All Removable Storage: Allow Direct Access In Remote Sessions

    • B. 

      All Removable Storage Classes: Deny All Access

    • C. 

      Removable Disks: Deny Read Access

    • D. 

      Removable Disks: Deny Write Access


  • 145. 
    You require fault tolerance for your operating system so that your computer running Windows 7 Home Premium can still boot up if a disk fails. You have two disks and unallocated space on your second disk. What do you do?
    • A. 

      Create a VHD and install an image of your computer on the VHD. Use BCDEdit to make the VHD bootable.256

    • B. 

      Create a RAID-0 volume.

    • C. 

      Create a RAID-1 volume.

    • D. 

      Create a RAID-5 volume.


  • 146. 
    You have a computer named Computer1 that runs Windows 7. The computer is a member of an Active Directory domain. The network contains a file server named Server1 that runs Windows Server 2008. You log on to the computer by using an account named User1. You need to ensure that when you connect to Server1, you authenticate by using an account named Admin1. What should you do on Computer1?
    • A. 

      From User Accounts, select Link online IDs.

    • B. 

      From Windows CardSpace, select Add a card.

    • C. 

      From Credential Manager, select Add a Windows credential.

    • D. 

      From Local Security Policy, modify the Access this computer from the network user right.


  • 147. 
    You have a computer that runs Windows 7. You create a HomeGroup. You need to secure the HomeGroup to meet the following requirements:- Allow access to the HomeGroup when you are connected to private networks- Block access to the HomeGroup when you are connected to public networksWhat should you do?
    • A. 

      From Network and Sharing Center, modify the advanced sharing settings.

    • B. 

      From the HomeGroup settings in Control Panel, modify the advanced sharing settings.

    • C. 

      Configure the HomeGroup exception in Windows Firewall to include Home or work (private) networks and block Public networks.

    • D. 

      Configure the File and Printer Sharing exception in Windows Firewall to include Home or work (private) networks and block Public networks.


  • 148. 
    You have a standalone computer that runs Windows 7. You need to prevent non-administrative users from using Device Manager. Users must be able to access Event Viewer. What should you do?
    • A. 

      From Control Panel, modify the default settings for media and devices.

    • B. 

      From Control Panel, modify the default settings for device installation.

    • C. 

      From the local computer policy, modify the application control policies.

    • D. 

      From the local computer policy, modify the Microsoft Management Console (MMC) settings.


  • 149. 
    You have a standalone computer that runs Windows 7. Multiple users share the computer. You need to ensure that you can read the content of all encrypted files on the computer. What should you do?
    • A. 

      Run the Certificates Enrollment wizard and then run Certutil.exe ¨Cimportpfx.r

    • B. 

      Run the Certificates Enrollment wizard and then run Certutil.exe ¨Cinstallcert.

    • C. 

      Run Cipher.exe /r and then add a data recovery agent from the local security policy.

    • D. 

      Run Cipher.exe /rekey and then import a security template from the local security policy.BÐ rû


  • 150. 
    You have a computer that runs Windows 7. The computer's disk is configured as shown in the exhibit. (Click the Exhibit button.) You need to extend volume C. What should you do first?
    • A. 

      Back up and delete volume D.

    • B. 

      Convert disk 0 to a dynamic disk

    • C. 

      Remove the crash dump from volume C.

    • D. 

      Move the paging file from volume C to volume E.


  • 151. 
    A remote user has a computer that runs Windows 7. The user reports that he receives several error messages while using an application. You do not have remote access to the user's computer. You need to tell the user how to create screenshots of the actions he performs on the computer. The solution must track the mouse actions that the user performs. What should you instruct the user to do?
    • A. 

      Press ALT+PrintScreen.

    • B. 

      Run Psr.exe and then click Start Record.

    • C. 

      From Mouse Properties, select Display pointer trails.

    • D. 

      Run Snippingtool.exe, click New, and then click Window Snip.


  • 152. 
    You have a computer that runs Windows 7. You perform regular data backups and system image backups. The computer experiences a hard disk failure. You replace the failed hard disk. You need to recover the computer to the previous Windows 7 environment. You start the computer from the Windows 7 installation media. Which recover option should you select?
    • A. 

      Command Prompt

    • B. 

      Startup Repair

    • C. 

      System Image Recovery

    • D. 

      System Restore


  • 153. 
    You have a computer that runs Windows Vista (x86). You need to perform a clean installation of Windows 7 (64-bit). What should you do?
    • A. 

      From the Windows 7 installation media, run Rollback.exe.

    • B. 

      From the Windows 7 installation media, run Migsetup.exe.

    • C. 

      Start the computer from the Windows 7 installation media. From the Install Windows dialog box, select the Upgrade option.

    • D. 

      Start the computer from the Windows 7 installation media. From the Install Windows dialog box, select the Custom (advanced) option.


  • 154. 
    Your network consists of a single Active Directory forest. You have 50 portable computers and 50 desktop computers. All computers have 32-bit hardware. You plan to deploy Windows 7 and 10 corporate applications to the computers by using a custom image. You need to prepare for the deployment by using the minimum amount of administrative effort. What should you do first?
    • A. 

      On one computer, install Windows 7 and the corporate applications.

    • B. 

      On one portable computer and one desktop computer, install Windows 7 and the corporate applications.

    • C. 

      On a server, install and run the Microsoft Assessment and Planning (MAP) Toolkit.

    • D. 

      On a server, install the Windows Automated Installation Kit (AIK) and run Windows System Image Manager (Windows SIM).


  • 155. 
    You have a computer that runs Windows 7. You create an application shim for a third-party application by using the Microsoft Application Compatibility Toolkit (ACT). You need to ensure that the application shim is applied the next time you run the application. What should you do first?
    • A. 

      Run Sdbinst.exe.

    • B. 

      Run Msiexec.exe.

    • C. 

      Right-click the application executable file and modify the compatibility settings.

    • D. 

      Right-click the application executable file and modify the advanced security settings.


  • 156. 
    You have a computer that runs Windows 7. Multiple users log on to the computer. The computer has five removable devices. You need to ensure that users can only access removable devices that have been previously installed on the computer. What should you modify in the Local Group Policy?
    • A. 

      Enable the Prevent redirection of USB devices setting.

    • B. 

      Enable the Prevent installation of removable devices setting.

    • C. 

      Disable the WPD Devices: Deny read access setting.

    • D. 

      Disable the Allow administrators to override Device Installation Restriction policies setting.


  • 157. 
    You have two computers on the same subnet. The computers have the IPv6 addresses shown in the following table. You need to test the connection to the IPv6 address from Computer1 to Computer2. Which command should you run?
    • A. 

      Ping -6 fe80::44df:1b68%12

    • B. 

      Ping -6 fe80::44df:1b68%10

    • C. 

      Ping -R fe80::44df:1b68%12

    • D. 

      Ping -R fe80::44df:1b68%10


  • 158. 
    A user named User1 uses a shared computer that runs Windows 7. User1 is a member of group named Group1. The computer contains a folder named Folder1. The permissions for User1 are shown in the User1 Permissions exhibit.(Click the Exhibit button.) The permissions for Group1 are shown in the Group1 Permissions exhibit. (Click the Exhibit button.) You need to ensure that User1 can create files in Folder1. All other members of Group1 must be prevented from creating files in Folder1. What should you do?
    • A. 

      On Folder1, assign the Full control permission to User1.

    • B. 

      On Folder1, remove the Deny - Write permission for Group1.)

    • C. 

      Share Folder1. Assign User1 the Read and Change share permission.

    • D. 

      Share Folder1. Assign Group1 the Read and Change share permission.


  • 159. 
    You have a computer that runs Windows 7. You attempt to add files to %programfiles%\app1 and receive a prompt to elevate your privileges. You need to ensure that you can add files to %programfiles%\app1 without receiving a prompt for elevated privileges. The solution must prevent harmful applications from making unwanted changed to the system. What should you do?
    • A. 

      Enable the built-in administrator account.

    • B. 

      Modify the User Account Control (UAC) settings.

    • C. 

      Add your user account to the local Power Users group.

    • D. 

      Modify the permissions of the %programfiles%\app1 folder.


  • 160. 
    You are employed as a desktop technician. The network consists of a single Active Directory domain. You are working on a client computer named Computer1 that runs Windows 7. You want to determine whether recent Windows Updates have been applied to Computer1. What should you do? (Each correct answer presents a complete solution. Choose TWO.)
    • A. 

      You should check the Security event log.

    • B. 

      You should check ReportingEvents.log file.

    • C. 

      You should check the update history in the Windows Update applet.

    • D. 

      You should check the Setup event log.


  • 161. 
    You work as a desktop support technician. The network consists of a single Active Directory domain. You have created a Virtual Hard Disk (VHD) with a disk image that you want to add to a client computer named Computer1 . You have copied the VHD to Computer1 and attached it using the attach vdisk command. You now want to add the Virtual Hard Disk (VHD) to the Windows 7 boot menu. What should you do?
    • A. 

      Use the Bcdedit.exe utility to modify the Windows Boot Manager settings.

    • B. 

      Use Disk Management to change the active partition.

    • C. 

      Use the BCDboot utility to copy the boot environment files and Boot Configuration Data (BCD)configuration from the \Windows directory in the VHD to Computer1

    • D. 

      You should consider sing the Bootcfg.exe utility with the /default parameter to set the VHD as the default boot device.


  • 162. 
    If you have a router in the network your connected to and the Default Gateway is set to 192.168.1.1 and the subnet mask is 255.255.255.0, which of the following are useable IP addresses on that network?
    • A. 

      192.168.1.1

    • B. 

      192.168.1.300

    • C. 

      192.168.1.300

    • D. 

      192.168.2.100


  • 163. 
    Which of the following must you download from Microsoft's Web site to obtain USMT 4.0?
    • A. 

      Windows Anytime Upgrade

    • B. 

      Windows Upgrade Advisor

    • C. 

      WAIK

    • D. 

      Microsoft Application Compatibility Toolkit


Back to top

Removing ad is a premium feature

Upgrade and get a lot more done!
Take Another Quiz
We have sent an email with your new password.