ProProfs - The Knowledge FREEway

Welcome Guest ( Log In | Register )

2 Pages V   1 2 >  
Reply to this topicStart new topic
> Power Supplies, A way to remember voltages from AT / ATX power supplies
thedevilwithin
post Feb 11 2007, 03:59 AM
Post #1


Active Member
***

Group: Active Member
Posts: 2
Joined: 10-February 07
Member No.: 8,850



Here's a way to remember voltages from AT / ATX power supply units.

Remember the word BOWRBY (bow-re-bii), its an acronym for the coloured wires coming from the PSU.

Black _ 0v
Orange _ +3.3v
White _ -5v
Red _ +5v
Blue _ -12v
Yellow _ +12v

and just the few odd ones,

Grey _ Power_good (+5v)
Purple _ +5v Standby
Green _ PS_On (Power Supply on signal)

AT form factor uses two 6-pin connectors typically identified as P8 and P9, but may be identified as P1 and P2.

ATX uses one 20-pin connector.
Go to the top of the page
 
+Quote Post
spy1954
post Feb 11 2007, 04:22 AM
Post #2


Sr. Expert & Sr. Moderator
Group Icon

Group: Moderator
Posts: 4,046
Joined: 17-December 05
From: Virginia
Member No.: 630



Nice notes on power supply voltages. First time I have seen an acronym for the power supply wires.

spy hi.gif


--------------------
Do the best you can, and don't worry about the rest.


CompTIA Certified
A+
PDI+
Network+
Go to the top of the page
 
+Quote Post
grmcalpin
post Feb 11 2007, 01:49 PM
Post #3


Active Member
***

Group: Active Member
Posts: 3
Joined: 11-February 07
Member No.: 8,900



QUOTE (thedevilwithin @ Feb 11 2007, 06:59 AM) *
Here's a way to remember voltages from AT / ATX power supply units.

Remember the word BOWRBY (bow-re-bii), its an acronym for the coloured wires coming from the PSU.

Black _ 0v
Orange _ +3.3v
White _ -5v
Red _ +5v
Blue _ -12v
Yellow _ +12v

and just the few odd ones,

Grey _ Power_good (+5v)
Purple _ +5v Standby
Green _ PS_On (Power Supply on signal)

AT form factor uses two 6-pin connectors typically identified as P8 and P9, but may be identified as P1 and P2.

ATX uses one 20-pin connector.

Thanks for the help. I have really gotten some great stuff from you guys
Go to the top of the page
 
+Quote Post
James
post Feb 11 2007, 04:01 PM
Post #4


Administrator
********

Group: Admin
Posts: 3,854
Joined: 23-June 05
From: California
Member No.: 1



appl.gif Wonderful! Permanently linked to this from the memorization tips section at:
http://www.proprofs.com/certification/comp...als/index.shtml


--------------------
James

ProProfs.com: Educational FREEway By Professionals & Professors
Go to the top of the page
 
+Quote Post
boffin
post Feb 14 2007, 09:32 AM
Post #5


Active Member
***

Group: Active Member
Posts: 9
Joined: 14-February 07
Member No.: 9,025



Very good tip, thanks
Go to the top of the page
 
+Quote Post
Heretic
post Feb 14 2007, 06:19 PM
Post #6


Active Member
***

Group: Active Member
Posts: 2
Joined: 14-February 07
Member No.: 9,043



I didn't know that I had to know the colors of the power cords on the test. All of the practice exams I've taken, both from my book and this site, haven't mentioned the colors. Do they come up on the exam?
Go to the top of the page
 
+Quote Post
J4M3Z
post Apr 8 2007, 01:11 AM
Post #7


Active Member
***

Group: Active Member
Posts: 6
Joined: 7-April 07
Member No.: 11,630



QUOTE (Heretic @ Feb 14 2007, 09:19 PM) *
I didn't know that I had to know the colors of the power cords on the test. All of the practice exams I've taken, both from my book and this site, haven't mentioned the colors. Do they come up on the exam?


I have seen it mentioned in 4 different books and it was thouroughly covered in my A+ core hardware college class. So I would assume it's on the test or could be. In my opinion, you should know them anyway in case you are testing PSU voltage with a multimeter.

Books were:
Sybex Complete Study guide
Sybex Fast Pass
The New A+ cert for Dummies book
CompTia's A+ guide to Hardware - by JEAN ANDREWS

And yes, I bought the dummies book. tongue.gif It covers the new exams and has 1100 pages.
Go to the top of the page
 
+Quote Post
lhallman
post May 6 2007, 04:42 PM
Post #8


* Outstanding Sr Expert *
********

Group: Active Member
Posts: 698
Joined: 4-May 07
Member No.: 13,040



There were a few questions with the colors when I attempted the test a few weeks ago.


--------------------
A.A.S. Computer Information Systems
CompTIA A+
CIW
Go to the top of the page
 
+Quote Post
nodekill
post May 8 2007, 11:02 AM
Post #9


Active Member
***

Group: Active Member
Posts: 2
Joined: 8-May 07
Member No.: 13,219



thanks this will help alot. smile.gif
Go to the top of the page
 
+Quote Post
rfoulger
post May 8 2007, 03:00 PM
Post #10


Active Member
***

Group: Active Member
Posts: 2
Joined: 8-May 07
Member No.: 13,196



QUOTE (thedevilwithin @ Feb 11 2007, 12:59 PM) *
Here's a way to remember voltages from AT / ATX power supply units.

Remember the word BOWRBY (bow-re-bii), its an acronym for the coloured wires coming from the PSU.

Black _ 0v
Orange _ +3.3v
White _ -5v
Red _ +5v
Blue _ -12v
Yellow _ +12v

and just the few odd ones,

Grey _ Power_good (+5v)
Purple _ +5v Standby
Green _ PS_On (Power Supply on signal)

AT form factor uses two 6-pin connectors typically identified as P8 and P9, but may be identified as P1 and P2.

ATX uses one 20-pin connector.

Thanks always had a problem with this one
Go to the top of the page
 
+Quote Post
syedabbas
post May 14 2007, 06:20 PM
Post #11


Active Member
***

Group: Active Member
Posts: 2
Joined: 14-May 07
Member No.: 13,522



hi folkes,

Thanks man......

I too had problem in memorizing this....

But now i finf it easy..... smile.gif
Go to the top of the page
 
+Quote Post
SuthernThang
post Jun 4 2008, 02:53 PM
Post #12


Active Member
***

Group: Active Member
Posts: 3
Joined: 4-October 07
Member No.: 22,492



Thank you for the great tips....
Go to the top of the page
 
+Quote Post
WaiWai
post Jun 4 2008, 09:25 PM
Post #13


Active Member
***

Group: Active Member
Posts: 2
Joined: 10-April 08
Member No.: 37,965



Thanks for the info, like others, I did not get this from the books that I have used.
Go to the top of the page
 
+Quote Post
tunjilly4real
post Jul 4 2008, 05:37 AM
Post #14


Active Member
***

Group: Active Member
Posts: 4
Joined: 19-June 08
Member No.: 44,339



QUOTE(thedevilwithin @ Feb 11 2007, 12:59 PM) *
Here's a way to remember voltages from AT / ATX power supply units.

Remember the word BOWRBY (bow-re-bii), its an acronym for the coloured wires coming from the PSU.

Black _ 0v
Orange _ +3.3v
White _ -5v
Red _ +5v
Blue _ -12v
Yellow _ +12v

and just the few odd ones,

Grey _ Power_good (+5v)
Purple _ +5v Standby
Green _ PS_On (Power Supply on signal)

AT form factor uses two 6-pin connectors typically identified as P8 and P9, but may be identified as P1 and P2.

ATX uses one 20-pin connector.




u right man.
Go to the top of the page
 
+Quote Post
aspartame
post Jul 6 2008, 03:57 AM
Post #15


Advanced Member
*****

Group: Active Member
Posts: 39
Joined: 18-June 08
From: Snake Mountain, Eternia
Member No.: 44,229



BOWRBY .... awesome. When I first looked at it I thought there was no way it was going to work, but it then it just stuck... thanks!!!


--------------------
A+ Certified IT Technician (601=790, 602=870)

You can't say **** here?
Go to the top of the page
 
+Quote Post
pcgeek
post Jul 6 2008, 05:35 AM
Post #16


Sr. Expert
********

Group: Active Member
Posts: 154
Joined: 24-January 07
From: Malaysia
Member No.: 8,223



hi.gif,
Any of u already taken A+ Essentials(220-601) test already?
I hope that i can pass since
it going to be my turn 2 days later .
Anyway i thought the power supply voltage questions are all from the A+hardware Core(220-301).
Hope to hear an answer from you guys.
Can anyone really update me on the question so that i can know which question is CompTIA going to ask?
Ireally need u guys help.gif

thankyou.gif
Go to the top of the page
 
+Quote Post
brotherbill
post Jul 6 2008, 07:07 AM
Post #17


* Outstanding Sr. Expert *
********

Group: Active Member
Posts: 1,514
Joined: 4-April 07
Member No.: 11,451



QUOTE(pcgeek @ Jul 6 2008, 08:35 AM) *
i thought the power supply voltage questions are all from the A+hardware Core(220-301).

The objectives for the Essentials exam specifically state:
QUOTE
Identify the names, purposes and characteristics of power supplies, for example: AC adapter, ATX, proprietary, voltage

There's not that much to power supplies. Take a little time to research the material and you won't have to worry about specific questions.
Go to the top of the page
 
+Quote Post
norman
post Oct 12 2008, 03:37 AM
Post #18


Sr. Active Member
****

Group: Active Member
Posts: 16
Joined: 28-August 08
Member No.: 50,741



QUOTE (brotherbill @ Jul 6 2008, 03:07 PM) *
The objectives for the Essentials exam specifically state:
There's not that much to power supplies. Take a little time to research the material and you won't have to worry about specific questions.


this is how i remember it


D/ozen apes
F/ive
T/rees

Go to the top of the page
 
+Quote Post
stamp11127
post Dec 1 2008, 03:57 PM
Post #19


Advanced Member
*****

Group: Active Member
Posts: 41
Joined: 20-November 08
From: Atlanta, Ga
Member No.: 68,594



Thanks for the info since I didn't know these.


--------------------
Vista 620--June 2009
MCDST --May 2009
CompTIA A+--Feb 2009
B.S. RIT 1980
Go to the top of the page
 
+Quote Post
Guest_triz_*
post Dec 2 2008, 04:43 AM
Post #20





Guests






You do not need to know these, lol.
Go to the top of the page
 
+Quote Post

2 Pages V   1 2 >
Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 

RSS Lo-Fi Version Time is now: 20th November 2009 - 10:24 PM
Home | Site Map
Copyright © 2005-2009 ProProfs.com - Privacy