CCNA (ICND2) - IPv6

40 cards

For CCNA - IPv6.


 
  
Created Nov 6, 2008
by
t256

 

 
Table View
 
Download
 
Print

Flashcard Set Preview

  Side A   Side B
1
How many bits does IPv6 addressing have?
 
128 bits.
2
Type of address like regular IPv4, publicly routable address? What is its address range?
 
Global unicast. 2000::/3
3
Type of address like IPv4 private IP addresse but can't be routed outside local subnet? What...
 
Link-local unicast. FE80::/10
4
Type of address like IPv4 private IP address but can't be routed to Internet (can be routed...
 
Unique local unicast. FC00::/
5
Type of packet addressed/delivered to only one int? What is the 1st 3 bits?
 
Unicast. 001
6
Type of packet addressed/delivered to multiple ints? What is its address range?
 
Multicast. FF00:/8
7
Type of packet adressed to multiple ints but delivered only to int found first?
 
Anycast.
8
IPv6 address equivalent of IPv4 0.0.0.0?
 
0:0:0:0:0:0:0:0 (::)
9
IPv6 loopback address?
 
0:0:0:0:0:0:0:1 (::1)
10
How IPv4 192.168.10.1 written in IPv4/6 mixed environment?
 
0:0:0:0:0:0:192.168.10.1 (6 zeros)
11
In IPv6 address stateless auto-configuration, what will be inserted in the middle of MAC address?
 
FFFE.
12
Command to enable IPv6 on router? (has to be enabled on each int as well)
 
ipv6 unicast-routing
13
Command to configure 2001:0d02::2:0100/64 on int e0?
 
int e0 ipv6 address 2001:0d02::2:0100/64
14
Command to configure IPv6 on int e0/1 to use only Link-local addresses?
 
int e0/1 ipv6 enable
15
Which version of DHCP does Ipv6 use to assign addresses?
 
DHCPv6.
16
Commands to enable RIPng on tunnel 0 / int f0/1?
 
ipv6 router rip 10 int tunnel 0 / f0/1 ipv6 rip 10 enable (No network commands required.)
17
Command to configure name-server 2001:d02::c003:1::f00d?
 
ip name-server 2001:d02::c003:1::f00d
18
Three common strategies to migrate IPv4 to IPv6?
 
Dual stacking 6to4 tunneling Proxy and Translation (NAT-PT (NAT Protocol Translation))
19
.
 
.
20
What mullticast address does RIPng use?
 
FF02::9
21
What unicast address does EIGRPv6 use?
 
FF02::A
22
What 2 multicast addresses does OSPF use?
 
FF02::5 (for OSPF routers) FF02::6 (for OSPF DRs)
23
Command to verify IPv6 routing table?
 
show ipv6 route
24
Command to verify IPv6 routing protocols?
 
show ipv6 protocols
25
Command to verify IPv6 RIPng configuration?
 
show ipv6 rip
26
Command to verify int s0/1 IPv6 configuration?
 
show ipv6 int s0/1
27
Command to show realtime RIPng infomration?
 
debug ipv6 rip
28
Command to verify OSPFv3 neighbour information?
 
show ipv6 ospf neighbor
29
Command to see realtime OSPFv3 packet/hello information?
 
debug ipv6 ospf packet or debug ipv6 ospf hello
30
Command to turn off all debugging?
 
un all
31
Commands to enable EIGRPv6?
 
(config)# ipv6 router eigrp 10 (config-rtr)# no shutdown (No network commands required.)
32
Commands to enable EIGRPv6 on int f0/1?
 
int f0/1 ipv6 eigrp 10
33
Commands to enable OSPFv3?
 
(config)# ipv6 router ospf 10 (config-rtr)# router-id 1.1.1.1
34
Command to enable OSPFv3 on int f0/1?
 
int f0/1 ipv6 ospf 10 area 0.0.0.0
35
.
 
.
36
In IPv6 stateless auto configuration, what is the message sent to a router by a host asking...
 
RS (Router Solicitation)
37
In IPv6 stateless auto configuration, what is the message sent to a host by a router including...
 
RA (Router advertisement)
38
Is Next Header field in IPv6 header?
 
Yes.
39
Three ways an IPv6 host can be assigned an address?
 
Statically Stateless autoconfiguration DHCPv6
40
Commands to configure IPv6 tunnels?
 
int tunnel 0 (create the tunnel interface) description IPv6 tunnel to RouterA (identify the...

No comments yet! Be the first to add a comment below!

Please login to post comments.
After login, we will forward you back to this flashcard.


Upgrade and get a lot more done!
Upgrade    Cancel