|
The following online study guide is designed to help you with your Comptia A+ test prep. You can discuss any questions or comments that you may have, either on these study guides or on the Comptia A+ test on our community forum.
|
|
Installing the Memory |
- Follow the instructions in caution and guidelines.
- Open the cover.
- Lay the computer on its side so that the system board is on the bottom of the inside of the computer.
- Press out the securing clip at each end of the memory module connector.
- Align the notch on the bottom of the module with the crossbar in the connector.
- Insert the module into the connector until the module snaps into position.
- Close the cover.
- Connect your computer and devices to electrical outlets, and turn them on.
|
|
|
|
|
|
|
